Model: 179/EFSP-KIT7
Ideal for troubleshooting and repairing electrical and electronic systems due to this True RMS multimeter's backlit digital display, analog bar graph, and built-in temperature measurements. Additionally, this kit comes supplied with the 1AC-II VoltAlert non-contact voltage tester ideal for testing energized circuits.
Versatile meter for maintenance, field service and bench repair.
The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record.
The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.
Check the features and specifications using the tabs above.
| Voltage DC | |
| Accuracy | ±(0.09% + 2) |
| Maximum Resolution | 0.1 mV |
| Maximum | 1000 V |
| Voltage AC | |
| Accuracy | ±(1.0% + 3) |
| Maximum Resolution | 0.1 mV |
| Maximum | 1000 V |
| Current DC | |
| Accuracy | ±(1.0% + 3) |
| Maximum Resolution | 0.01 mA |
| Maximum | 10 A |
| Current AC | |
| Accuracy | ±(1.5% + 3) |
| Maximum Resolution | 0.01 mA |
| Maximum | 10 A |
| Resistance | |
| Accuracy | ±(0.9% + 1) |
| Maximum Resolution | 0.1 Ω |
| Maximum | 50 MΩ |
| Capacitance | |
| Accuracy | ±(1.2% + 2) |
| Maximum Resolution | 1 nF |
| Maximum | 10,000 µF |
| Frequency | |
| Accuracy | ±(0.1% + 1) |
| Maximum Resolution | 0.01 Hz |
| Maximum | 100 kHz |
| Temperature | |
| Accuracy | ±(1.0% + 10) |
| Maximum Resolution | 0.1°F (0.1°C) |
| Range | -40 to 752°F (-40 to 400°C) |
| Environmental Specifications | |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Humidity (without condensation) | 0 to 90% (32 to 95°F) (0 to 35°C) 0 to 70% (95 to 122°F) (35 to 50°C) |
| Safety Specifications | |
| Overvoltage Category | EN 61010-1 to 1000 V CAT III EN 61010-1 to 600 V CAT IV |
| Agency Approvals | UL, CSA, TÜV listed and VDE Pending |
| Mechanical and General Specifications | |
| Battery Life | Alkaline approximately 200 hours typical, without backlight |
| Size | 1.7 x 3.5 x 7.3" (43 x 90 x 185 mm) |
| Weight | 0.9 lb (420 g) |
Click on a category to view a selection of compatible accessories with the Fluke 179 True RMS Digital Multimeter with VoltAlert non-contact voltage tester kit.
We accept these payment methods:
We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
