Model: 87V/IMSK | Order No: 87-5/IMSK
Built around the True RMS industrial multimeter, this kit also comes equipped with a current clamp. Together they provide high resolution and accuracy, making it ideal for troubleshooting any electrical system. Additionally, the accessories included in this kit are designed to increase your productivity.
Identifies complex signal problems fast
Provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment. On top of that, this industrial multimeter effectively performs in loud, high energy, and high altitude locations. Features a low pass filter which supports precise frequency measurements on VFDs and acquires intermittents as quickly as 250 µS.
Use this multimeter to measure AC currents up to 10 A directly. Also, features a built-in thermometer that enables you to take temperature readings without having to carry a separate instrument and more. Plus, comes with a bright, two-level backlit display which allows you to see the results better in dim light.
Correctly measure pulse-width modulated motor drive signal
Takes the guesswork out of drive system troubleshooting. Includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high frequency, high-energy noise generated by large drive systems.
All the inputs on this industrial multimeter are updated to the third and CAT III, 1000 V. They are designed to withstand spikes in excess of 8 V.
How to choose the best DMM for your job?Multimeter Selection Guide
Fluke i400 AC Current Clamp, 400 A AC
Fluke 80BK-A Integrated DMM Temperature Probe
Fluke TL75 Hard Point™ Test Lead Set
Fluke AC175 Alligator Clip Set
|DC Voltage||Range: 0.1 mV to 1000 V
Accuracy: ±(0.05% + 1)
Maximum resolution: 10 µV
|AC Voltage||Range: 0.1 mV to 1000 V
Accuracy: ±(0.7% + 2) True RMS
AC bandwidth: 20 kHz with low pass filter; 3 dB @ 1 kHz
Maximum resolution: 0.1 mV
|DC Current||Range: 0.1 µA to 10 A (20 A for 30 seconds maximum)
Amps Accuracy: ±(0.2% + 2)
Maximum resolution: 0.01 µA
|AC Current||Range: 0.1 µA to 10 A (20 A for 30 seconds maximum)
Amps Accuracy: ±(1.0% + 2) True RMS
Maximum resolution: 0.1 µA
|Resistance||Range: 0.1 Ω to 50 MΩ
Accuracy: ±(0.2% + 1)
Maximum resolution: 00.1 Ω
|Capacitance||Range: 1 nF to 9999µF
Accuracy: ±(1% + 2)
Maximum resolution: 0.01 nF
|Frequency||Range: 0.5 Hz to 199.99 kHz
Accuracy: ±(0.005% + 1)
Maximum resolution: 0.01 Hz
|Duty Cycle||Range: 99.9%
Accuracy: ±(0.2% per kHz + 0.1%)
Maximum resolution: 0.1%
|Temperature Measurements||–328 to 1994°F (–200 to 1090°C) excluding probe|
|80 BK Temperature Probe||–40 to 500°F, ± 4.0°F or 2% (–40.0 to 260°C, ± 2.2°C or 2%) whichever is greater|
|Conductance||Maximum conductance: 60.00 nS
Accuracy: ±(1.0% + 10)
Maximum resolution: 0.01 nS
|Diode||Range: 3 V
Resolution: 1 mV
Accuracy: ±(2% + 1)
|Duty Cycle Range||Accuracy: within ±(0.2% per kHz + 0.1%)|
|Data Storage||Peak transient capture: 250µS
Reading hold: Yes
|Display||Digital: 6000 counts updates 4/sec, 19,999 counts in high–resolution mode
Analog bar graph: 32 segments, updates 40/sec
Frequency: 19,999 counts, updates 3/sec at >10 Hz
|Low Pass Filter||Measurement of VFDs: Yes|
|Operating Temperature||-4 to 131°F (–20 to 55°C)|
|Storage Temperature||-40 to 140°F (–40 to 60°C)|
|Humidity (Without Condensation)||0 to 90% at 32 to 95°F (0 to 35°C)
0 to 70% at 95 to 131°F (35 to 55°C)
|Operating Altitude||6561.68' (2000 m)|
|Mechanical and General Specifications|
|Shock||3.3' (1 m) drop per|
|Vibration||Per MIL–PRF–28800 for a Class 2 instrument|
|Power||3 x AA batteries, 400 hours typical without backlight|
|Dimensions||7.9 x 3.9 x 2" (201 x 98 x 52 mm)|
|Weight||0.8 lb (355 g)|
|Compliance||CAT IV 600 V , CAT III 1000 V|
|Overvoltage Category||EN 61010–1 to 1000 V CAT III, 600V CAT IV|
|Agency Approvals||CE, CSA|
Solve problems fast and deliver accurate and advanced troubleshooting capabilities that can handle complex signals with this industrial multimeter.
For use with digital multimeters, this current clamp allows users to take accurate current measurements without breaking electric circuits. Additionally, it measures up to 400 A AC.
Compatible with Fluke DMMs with temperature measurement functions.
Offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 0.16" (4 mm) banana plugs.
Featuring slide-on alligator clips (red, black) for use with TL175, TL71, and TL75 Test Lead Sets. The jaws provide an 8 mm opening and have a CAT IV 600 V, CAT III 1000 V, 10 A rating.
Click on a category to view a selection of compatible accessories with the Fluke 87V/IMSK Industrial Multimeter Service KIT with the i400.