1.888.610.7664

sales@GlobalTestSupply.com

Customer Reviews
MyFlukeStore
 
 
Fluke FEV100 Electric Vehicle Charging Station Adapter with type 1 connector and cable-
Downloads: datasheet manual

Ask an Expert

Fluke FEV100 Electric Vehicle Charging Station Adapter with type 1 connector and cable

Model: FEV100/TY1

Conveniently test the function and safety of electric vehicle charging stations with this charging station adapter that comes complete with a type 1 connector and cable. While simulating the presence of an electric vehicle, this adapter performs a variety of tests and provides easy performance and maintenance testing.

$1,199.99 USD

Availability:
1 to 2 Weeks


Fluke FEV100/TY1 Offers

Monitor the nominal voltage of the station voltage by connecting this adapter and selecting either state C or D using the rotary switch to start the charging cycle. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for effortless performance and maintenance testing.

Features

  • PE pre-test to test dangerous V in the earth
  • CP control pilot for vehicle simulation
  • PE and CP error notification
  • GFCI testing
  • Connectivity with other T & M tools
  • Voltage, waveform, loop impedance and resistance

Test the functionality and safety of electrical vehicle charging stations, easily and reliably

Test the safety and performance of type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with this adapter. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope. Use it to verify an EVSE is working properly after install and during periodic maintenance, or troubleshoot an EVSE if it is not delivering the appropriate charge.

Safety

EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users. Stay protected from and check risk of electric shock with the GFCI trip test. This function verifies the breaker of the EVSE is connected by detecting ground faults. Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.

Simplicity and convenience

Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all with one adapter that safely integrates with the portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for easy performance and maintenance testing.

Applications

  • Ground fault checks
  • Insulation of wires
  • Check voltage of the contact on the charger
  • Charging station troubleshooting

Fluke FEV100/TY1 Specifications

Input Voltage UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 208 V, 60 Hz (three-phase system)
UL1/N = 120 V, UL2/N = 120 V, UL1/L2 = 240 V, 60 Hz (single-phase system)
±10 % voltage fluctuations from nominal 2
EV connector (EVC-13) SAE J1772 socket, 16 A (type 1, 5P single-phase)
Internal power consumption 2 W maximum
Temperature Operating: -4 to 104°F (-20 to 40 °C)
Storage: -4 to 122°F (-20 to 50°C)
Humidity Operating range: 10 to 85% relative humidity non-condensing
Storage: 0 to 85% non-condensing
Operating Altitude 6561’ (2000 m) maximum
Dimensions 8.66 x 4.33 x 1.77" (220 x 110 × 45 mm) without cable assembly
Weight 4.4 lbs (2 kg)
Click here for complete specifications on the Fluke FEV100/TY1

What's included with the Fluke FEV100/TY1

  • Test Adapter
  • Connector and Cable
  • Carrying Case
  • Manual

Webinar: EVSE Safety Maintenance with Fluke


In recent years, more people are opting for greener solutions to minimize environmental damage, which has led to an increased demand for environmentally safe solutions such as electric vehicles. Naturally, this has led to an increase in the installation of EV charging stations, but also the risks for technicians. In 2020, there were 126 fatal and 2200 non-fatal electrical injuries. Many of these are caused when technicians are exposed to hazardous voltage and arc faults that could cause shock and fire hazards due to a lack of understanding of proper EVSE installation and maintenance. Considering that EVSEs have a high rate of failure, estimated at 30 to 50% (SAE), reliability is essential when building EV infrastructure and gaining user acceptance.

Webinar: Electrical Equipment Safety with Fluke


When safety is on top of mind, everyone benefits. Ensuring that your facility employs the best workplace practices, test tool standards, and ratings, and considers the dangers and causes of incidents will make for a safer work environment. Taking steps to improve these aspects will allow you to enjoy benefits, such as increased productivity and reduced assets-related and accident-related costs. Many tools can help you improve safety by testing, maintaining, monitoring, or troubleshooting live electrical equipment.

How to use the Fluke FEV100 type 1 connector


Check out this training video to find out how the FEV100 can provide many benefits. The FEV100 has a connector with an interface for type 1 socket outlets or J-plugs on a level 2 charging station that allows you to conveniently test the function and safety of electric vehicle charging stations. You can also test GFCI trip time and leak current, troubleshoot and simulate control pilot, and PE errors through the simple press of a button.

How to perform a GFCI safety test with the Fluke FEV100 EVSE test adapter


Looking for an EVSE adapter? The FEV100 EVSE adapter is the only EV charging station tester with GFCI troubleshooting. GFCI protection monitors electrical current moving through a circuit and cuts off power when an error occurs to protect you from electrocution. Check out this video to learn how to perform a GFCI safety test with the FEV100 EVSE adapter!

How to perform a grounding protection pre-test with the Fluke FEV100 EVSE test adapter


The FEV100 EVSE test adapter has a grounding protection pre-test feature that tests the PE conductor for dangerous voltage so you can avoid accidents when performing tests on charging stations. Check out this video to learn how you can use this safety feature!

How to verify charging voltage with the Fluke FEV100 EVSE test adapter


Learn why the FEV100 EVSE adapter is the best tool to verify charging voltage. Capable of simulating control pilot charging states of an AC level 2 electric vehicle charging station, this adapter allows you to verify the charging voltage using a digital multimeter or scopemeter. Check out this video to learn how to use the FEV100!

A satisfied technician explains why the Fluke FEV100 is an exceptional tool


Wondering how you can fly through your troubleshooting tasks in a fraction of the time? The speed of this tester is hard to compete with. This technician estimated that he could easily complete eight stations within 20 minutes as opposed to spending 20 minutes on each station without the tool. That's valuable time saved! Check out this satisfied technician's thoughts on our Fluke FEV100 EVSE Test Adapter.

Accessories

Click on a category to view a selection of compatible accessories with the Fluke FEV100 Electric Vehicle Charging Station Adapter with type 1 connector and cable.

Fluke 1664FC US Installation Multifunction Tester, 500 V, insulation pre-test 1664FC US
Run seven installation tests automatically in one sequence with a single connection with this installation multifunction tester which features an insulation pre-test to prevent damage to connected appliances. In addition, this tester allows wireless transmission and viewing of test results from the field on a smartphone.
$3,452.00 USD

Learn More
Fluke 87V Industrial True-RMS Multimeter with temperature, 1000 V, 10 A 87V
Identify complex signal problems fast with this industrial multimeter capable of capturing intermittents as quickly as 250 μS. In addition, this multimeter features a low-pass filter for accurate measurements on VFDs and shielding to block readings from high-frequency and high-energy noise.
$431.94 USD

was $529.99


Learn More
Fluke BT521 Advanced Battery Analyzer BT521
Work with confidence with this battery analyzer that offers an intuitive interface for simplified battery testing, workflow, and reduced testing complexity. Additionally, it works for users who need to measure dc/ac voltage, frequency, and temperature.
$7,279.99 USD

Learn More
Fluke 125B Industrial ScopeMeter Hand-Held Oscilloscope with AC clamp, 40 MHz 125B
Work with confidence with the oscilloscope that offers simplified testing, more insight, faster electro-mechanical troubleshooting, and comes with 40 MHz of bandwidth. Conveniently measures voltage, current, power waveforms and automatically displays critical numerical readings.
$3,360.99 USD

Learn More
Fluke 1630-2 FC Earth Ground Clamp, 1000 V, 40 Hz to 1 kHz 1630-2 FC
Fast and safe, this earth-ground clamp measures indoor/outdoor earth-ground resistance and ac leakage currents without disconnecting the earth-ground stake from the grounding system. In addition, this clamp features a heavy-duty clamp jaw that stays in alignment and calibration in industrial conditions.
$2,599.99 USD

Learn More
Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.
$91.27 USD

was $111.99


Learn More
Fluke 376 FC True RMS AC/DC Clamp Meter with iFlex 376 FC
Ideal for a wide range of current measurement situations, this True RMS clamp meter also comes equipped with the iFlex™ flexible current probe which increases flexibility and measures awkward sized conductors. Additionally, this tool can read up to 1000 V and 1000 A in both ac and dc modes.
$537.89 USD

was $659.99


Learn More

Ask a question about the Fluke FEV100 Electric Vehicle Charging Station Adapter with type 1 connector and cable :

Customer Reviews for the Fluke FEV100/TY1