1.888.610.7664

sales@GlobalTestSupply.com

Customer Reviews
MyFlukeStore
 
 
Fluke 27-II Industrial Multimeter with IP67 rating-
Downloads: datasheet manual

Ask an Expert

Fluke 27-II Industrial Multimeter with IP67 rating

Model: 27-II

Highly durable AC/DC digital multimeter that offers IP67 waterproof and dustproof protection and can withstand a 10ft/3m drop test and comes with a limited lifetime warranty. Ideal for harsh industrial applications.

Traceable Calibration Certificate for your 27-II Industrial Multimeter with IP67 rating

3 to 4 Weeks

$616.95 USD

was $756.99



Fluke 27-II Offers

The new standard for rugged

Fluke 27 II and Fluke 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.
  • Measure up to 1000 V ac and dc
  • Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
  • Frequency to 200 kHz
  • Extended ac voltage bandwidth - 40 Hz to 30 kHz
  • Resistance, continuity and diode test
  • Min/Max and average recording to capture variations automatically
  • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • Average responding voltage and current for measurements (Fluke 28-II is TRMS)
  • Backlit keypad buttons allow for easy visibility in lowlit areas
  • Large display digits and 2 level bright white backlight for increased visibility
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
  • Long battery life (800 hours)
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
  • MSHA approval (pending)
Note: for a TRMS version of this Fluke 27-II that also includes built-in temperature measurement and a unique Low Pass filter for measuring accurate readings when working on variable speed drives (VFDs/VSDs) see the Fluke 28-II industrial multimeter.

Fluke 27-II Specifications

DC Voltage Range 0.1 mV to 1000 V
DC Voltage Accuracy 0.1 % +1
AC Voltage Range 0.1 mV to 1000 V
AC Voltage Accuracy 0.5 % +3
DC Current Range 0.1 µA to 10 A
DC Current Accuracy 0.2 % + 4
AC current Range 0.1 µA to 10 A
AC Current Accuracy 1.5 % + 2
Resistance Range 0.1 Ω to 50 MΩ
Safety CAT IV 600 V, CAT III 1000
Dimensions 8 x 3.75 x 2.2" (203 x 95 x 56 mm)
Weight 1.6 lb (0.75 kg)
Click here for complete specifications on the Fluke 27-II

What's included with the Fluke 27-II

  • Fluke 27-II Industrial Multimeter with IP67 rating

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 27-II Industrial Multimeter with IP67 rating.

Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.
$93.72 USD

was $114.99


Learn More
Fluke C101 Hard Carrying Case C101
Compatible with a vareity of Fluke industrial test tools. Additionally, this hard carrying case features a foam interior.
$97.79 USD

was $119.99


Learn More
Fluke C550 Premium Tool Bag C550
Tool Bag with steel reinforced frame.
$119.80 USD

was $146.99


Learn More
Fluke C125 Soft Meter Case for Fluke Multimeters C125
Soft zippered carrying case with detachable external pouch. To be used with the 120-series, multimeters and testers.
$60.31 USD

was $74.00


Learn More
Fluke C37XT Protective EVA Hard Tool Case, 10.9 x 4.7" C37XT
Durable and high quality, this 10.9 x 4.7" (277 x 119 mm) tool case is designed to fit most multimeters and similarly sized tools. Made from 600D EVA foam, this case features hinged dividers, additional pockets, straps, space for many accessories, and secures your tools with adjustable straps.
$52.97 USD

was $64.99


Learn More
Fluke i3000s AC Current Clamp I3000S
3000A AC current clamp with BNC terminated lead
$678.07 USD

was $831.99


Learn More
Fluke i1010 AC/DC Current Clamp I1010
Highly reliable, measures 1 to 1000 A, and provides accurate current reading without breaking the circuit. This clamp measures both AC and DC with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas.
$471.88 USD

was $578.99


Learn More
Fluke i2000 FLEX Flexible AC Current Clamp I2000-FLEX
Utilizing the Rogowski principle, the clamp can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders, or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
$493.88 USD

was $605.99


Learn More
Fluke i410 AC/DC Current Clamp I410
The current clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC currents. The large clamp claw gives you access to difficult to reach areas.
$290.95 USD

was $356.99


Learn More
Fluke i400 AC Current Clamp, 400 A AC, CAT IV 600 V/CAT III 1000 V I400
Compatible with digital multimeters, this current clamp measures up to 400 A AC and features a 1 mA/A output that guarantees easy reading on your meter. In addition, this clamp provides precise current measurements without breaking electric circuits, helping you measure safely with industry-standard safety ratings.
$177.66 USD

was $217.99


Learn More
Fluke i200 AC Current Clamp I200
A single range 200 A clamp-on AC current clamp with current output via safety shrouded banana plugs. It is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
$193.96 USD

was $237.99


Learn More
Fluke 80PK-9 General Purpose Probe 80PK-9
Featuring a general purpose type-K thermocouple probe for surface, air and non-caustic gases. It has a measuring range of -40 to 260°C.
$93.72 USD

was $114.99


Learn More
Fluke L206 Deluxe LED Hat Light L206
Three super bright white LEDs never burn out attach to hard hat, baseball cap, or panel door.
$68.46 USD

was $84.00


Learn More
Fluke LVD2 Volt Light, Non Contact Voltage Detector & LED flashlight LVD2
Non-contact AC voltage detector and LED flashlight includes dual sensitivity turning blue 1" to 5" for the source and red at the source.
$48.89 USD

was $59.99


Learn More
Fluke L210 Probe Light Kit L210
Comes in a small and rugged design, this probe light kit liberates the users' hands for work. Additionally, it features a bright white LED and fits between the modular test probe and test lead.
$70.09 USD

was $86.00


Learn More
Fluke L215 SureGrip Kit with probe light and probe extender L215
Ideal for high-energy environments. Additionally, this kit comes equipped with a probe extender and probe light, which allows users to illuminate those hard-to-reach areas.
$141.81 USD

was $174.00


Learn More
Fluke TL220 Suregrip Industrial Test Lead Set TL220
Includes the Fluke AC220, Fluke TP220, and Fluke TL224.
$96.16 USD

was $117.99


Learn More
Fluke TL223 SureGrip Electrical Test Lead Set TL223
Designed for your comfort so you can focus on taking accurate measurements, this handy all-in-one kit comes equipped with a SureGrip alligator clip set, slim-reach test probes (flat bladed), and SureGrip silicone test lead set.
$96.16 USD

was $117.99


Learn More
Fluke TL71 Premium Right Angle Test Lead Set TL71
Comfort grip probes with flexible silicone-insulated, right-angle test leads. They are heat and cold resistant, with a safety rating of CAT II 1000 V, 10 A.
$37.48 USD

was $45.99


Learn More
Fluke TLK-225 SureGrip Master Accessory Set TLK-225
Perfect replacement kit provides flexibility and comfort with all SureGrip™ leads and probes in a convenient six pocket, roll-up pouch.
$199.67 USD

was $244.99


Learn More
Fluke 80K-15 High Voltage Probe 80K-15
Designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.
$335.77 USD

was $411.99


Learn More
Fluke 80K-40 High Voltage Probe 80K-40
Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.
$303.17 USD

was $371.99


Learn More
Fluke 80K-6 KV High Voltage Probe 80K-6
Designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.
$193.96 USD

was $237.99


Learn More
Fluke AC285 SureGrip Alligator Clips AC285
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.
$39.11 USD

was $47.99


Learn More
Fluke 80AK-A Thermocouple Adapter 80AK-A
Designed to adapt K type thermocouples mini-connector to dual shrouded banana plug inputs. Additionally, it is ideal for low voltage applications below 30 V AC and 60 V DC.
$44.00 USD

was $53.99


Learn More
Fluke 80PK-1 Bead Probe 80PK-1
A K type thermocouple ideal for general purpose applications.
$57.04 USD

was $69.99


Learn More
Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27
Compatible with any temperature measuring instrument that accepts type K thermocouples features a miniature connector input and a cold reference junction compensation. Additionally, this industrial surface temperature probe is ideal for surfaces in rugged environments.
$379.78 USD

was $465.99


Learn More
Fluke 80PK-3A Surface Temperature Probe 80PK-3A
Compatible with any temperature measuring instrument that accepts type K thermocouples and features a miniature connector input. Additionally, this surface temperature probe is ideal for measuring the temperature of flat or slightly convex surfaces, with an exposed junction to allow direct contact with the surface being measured.
$193.96 USD

was $237.99


Learn More
Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8
Uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Designed to reliably measure the temperature of pipes ¼" (6 mm) to 1⅜" (35 mm) in diameter, at temperatures between -20 and 300°F (-29 and 149°C), while retaining a long service life.
$212.71 USD

was $260.99


Learn More
Fluke 80T-150U Universal Temperature Probe 80T-150UA
A self-contained temperature-to-voltage converter, this probe is designed to provide a direct temperature reading when it is connected to any high impedance DMM capable of 1 mV resolution, and at least a 300-count full-scale readout capability.
$335.77 USD

was $411.99


Learn More
Fluke 80TK Thermocouple Module 80TK
Thermocouple converter that accepts the output of any K-type thermocouple and converts it to 1 mV per degree (Celsius or Fahrenheit).
$185.81 USD

was $227.99


Learn More

Ask a question about the Fluke 27-II Industrial Multimeter with IP67 rating :

Customer Reviews for the Fluke 27-II