Model: 116/323-KIT
Comes equipped with a fast-acting, general-purpose clamp meter, this combo kit is built around this HVAC/R multimeter with temperature and microamps. The multimeter comes with temperature and microamp measurements, and the clamp meter provides True RMS measurements and optimized ergonomics, making this kit ideal for electricians.
The complete solution for HVAC troubleshooting, this value-packed kit includes Multimeter and Clamp Meter. Along with all the accessories an HVAC professional needs. All fitting into a compact carrying case.
The Fluke 116 HVAC Multimeter features temperature and microamps measurements useful for heating, ventilation, air conditioning and refrigeration (HVAC/R) technicians. The Fluke 116 is a compact true-rms meter and has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors.
The Fluke 116 also, has dual impedance capability: incorporating both regular high impedance test capabilities and low impedance functions for detecting ghost voltages, just switch to the Auto-V/LoZ (low impedance) test setting to whether measurement is a ghost voltage.
True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
Measurement capability
Included accessories
| Accuracy Specifications | |
| DC Millivolts | Range: 600.0 mV Resolution: 0.1 mV Accuracy: 0.5 % + 2 |
| DC Volts | Range: 6, 60, 600 V Resolution: 0.001, 0.01, 0.1 V Accuracy: 0.5 % + 2 |
| Auto Volts | Range: 600.0 V Resolution: 0.1 V Accuracy: 2.0 % + 3 (dc, 45 to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz) |
| AC millivolts True RMS | Range: 600.0 mV Resolution: 0.1 V Accuracy: 1.0 % + 3 (dc, 45 to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz) |
| AC Volts True RMS | Range: 6, 60, 600 V Resolution: 0.001, 0.01, 0.1 V Accuracy: 1.0 % + 3 (dc, 45 to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz) |
| Continuity | Range: 600 Ω Resolution: 1 Ω Accuracy: Beeper on <20 Ω off> 250 Ω; detects opens or shorts of 500 µs or longer |
| Ohms | Range: 600 Ω, 6, 60, 600 kΩ, 6, 40 MΩ Resolution: 1 Ω, 0.001, 0.01, 0.1 kΩ, 0.001, 0.01 MΩ Accuracy: 0.9 % + 1 |
| Diode Test | Range: 2.000 V Resolution: 0.001 V Accuracy: 0.9 % + 2 |
| Capacitance | Range: 1000, nF, 10, 100, 9999, 100 to 1000, >1000 µF Resolution: 1 nF, 0.01, 0.1, 1 µF Accuracy: 0.9 % + 2, 1.9 % + 2, 5 % + 20 |
| Lo-Z Capacitance | Range: 1 nF to 500µF Accuracy: 10 % + 2 typical |
| Temperature (Type-K Thermocouple) | Range: -40 to 752 °F (-40 to 400 °C) Resolution: 0.2 °F (0.1°C) Accuracy: 1 % + 18 |
| AC µAmps True RMS (45 to 500 Hz) | Range: 600.0 µA Resolution: 0.1 µA Accuracy: 1.5 % + 3 (2.5 % + 3 >500 Hz |
| DC µAmps | Range: 600.0 µA Resolution: 0.1 µA Accuracy: 1.0 % + 2 |
| Hz (V or A input) | Range: 99.99, 999.9 Hz, 9.999, 50.00 kHz Resolution: 0.01, 0.1 Hz, 0.001, 0.01 kHz Accuracy: 0.1 % + 2 |
| General Specifications | |
| Maximum Voltage Between any Terminal and Earth Ground | 600 V |
| Display | Digital: 6,000 counts, updates 4/sec |
| Bar Graph | 33 segments, updates 32/sec |
| Operating Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -40 to 140°F (-40 to 60°C) |
| Battery | 9 V Alkaline, NEDA 1604A/IEC 6LR61 |
| Battery Life | 400 hours typical, without backlight |
| Surge Protection | 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2 |
Features temperature and microamp measurements that allow professionals to troubleshoot problems with HVAC equipment and flame sensors. Additionally, this multimeter is designed for HVAC/R professionals and also measures resistance, continuity, frequency, and capacitance.
Designed to perform in the toughest environments and provides you with reliable results, this True RMS clamp meter allows access in tight areas due to its slim, compact size. It is ideal for identifying the presence of load current, AC voltage, and continuity of circuits, switches, fuses, and contacts.
Offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 0.16" (4 mm) banana plugs.
Compatible with Fluke DMMs with temperature measurement functions.
Designed to adapt K type thermocouples mini-connector to dual shrouded banana plug inputs. Additionally, it is ideal for low voltage applications below 30 V AC and 60 V DC.
Hang your meter in a variety of ways for convenient hands-free operation. Attaches to most Fluke meters.
Includes two padded pockets for protection of two test tools and a pouch for test leads and other accessories. It is made of durable polyester 600D.
Click on a category to view a selection of compatible accessories with the Fluke 116/323 HVAC/R Combo Kit.
We accept these payment methods:
We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
