Fluke 789 Accessories

Fluke L215 SureGrip Kit with probe light and probe extender
Model: L215

Ideal for high-energy environments. Additionally, this kit comes equipped with a probe extender and probe light, which allows users to illuminate those hard-to-reach areas.

Fluke 85RF High-Frequency Probe, 500 Mhz
Model: 85RF-II

A high-frequency probe designed to convert a DC voltmeter with an input impedance of 10 MΩ into a high frequency (100 kHz to 500 Mhz) RF voltmeter. Additionally, it's probe's DC output is calibrated to equal the RMS value of sine wave input.

Fluke 80T-150U Universal Temperature Probe
Model: 80T-150UA

A self-contained temperature-to-voltage converter, this probe is designed to provide a direct temperature reading when it is connected to any high impedance DMM capable of 1 mV resolution, and at least a 300-count full-scale readout capability.

Fluke 80K-15 High Voltage Probe
Model: 80K-15

Designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 V peak AC or DC Overvoltage Category I. The probe provides high accuracy when used with a voltmeter having 10 MΩ input impedance. Intended for low energy applications.

Fluke TL950 Mini-Pincer Test Lead Set
Model: TL950

30V RMS or 60V DC, and 15A.

Fluke TL28A Automotive Test Lead Set
Model: TL28A

Features flexible silicone insulated leads are heat and cold resistant and are Cat I 30 V, 10 A rated.

Fluke TL27 Heavy Duty Test Lead Set
Model: TL27

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.

Fluke TL26A 5-Way Test Lead Set, 60"
Model: TL26A

Provides five different ways to connect to terminals, this test lead set features 60" (1.5 m), silicone-insulated leads, useable from -112 to 158°F (-80 to 70°C), and is rated for 30 V, 8 A.

Fluke TL970 Hook and Pincer Kit
Model: TL970

Kit includes TL940 Mini-Hook Test Lead Set, TL950 Mini-Pincer Test Lead Set, and TL960 Micro-Hook Test Lead Set.

Fluke TL935 Patch Cord Kit
Model: TL935

Kit of 60, 90, and 120cm cords. 30V RMS or 60V DC, and 15A.

Fluke TL932 Patch Cord Set 36" (90 cm)
Model: TL932

36" (90 cm) (30V rms or 60V DC, 15A).

Fluke TL930 Patch Cord Set (60 cm)
Model: TL930

30V RMS or 60V DC, and 15A.

Fluke TP920 Test Probe Adapter Kit
Model: TP920

Fluke TP80 Electronic Test Probe Set
Model: TP80

Fluke TP38 Slim Reach Test Probe Set
Model: TP38

Comes with hard stainless steel probe tips, this slim reach test probes set comes in one pair of slender probe bodies that for probing closely spaced or recessed terminals. Additionally, they feature an insulated probe tip.

Fluke TP912 Replacement Tips for TL910
Model: TP912

Fluke BP980 Double Banana Plug Kit
Model: BP980

Fluke AC89 Heavy Duty Insulation Piercing Test Clip
Model: AC89

Single probe pierces 0.01 to 0.6" (0.25 to 1.5 mm) insulated wire with a small pin allows self-healing of the insulation, and 1000 V, 10 A maximum.

Fluke AC87 Heavy Duty Bus Bar Clip Set
Model: AC87

Comes equipped with one pair (red, black) of flat, right angle design for connecting to bus bars, and CAT III 600 V, 5 A rating, CSA listed. Adjustable collar provides two ranges of jaw openings up to 1.81" (30 mm).

Fluke FlukeView Forms Software with cable (FVF-SC2)
Model: FVF-SC2

For use with the Fluke 180 Series, 789, 1550B, 1550C, 1555, 53-2-B, 54-2-B and 1653.