Model: 709H
The Fluke 709H precision loop calibrator adds HART communications and supports a select set of HART universal and common practice commands. Data log feature offers selectable capture with recording intervals of 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions.
The Fluke 709H mA loop calibrator is designed to save time and produce high-quality results. These calibrators are built around a user friendly interface with a Quick-Set rotary encoder knob. This tool reduces the time it takes to measure, or source,current and power up a loop. The protective holster easily fits into a technician's hand and the large backlit display is easy to read, even in dark, cramped worked areas.
The 709H adds HART communicationsand supports a select set ofthe HART universal and commonpractice commands. This makesthe 709H unique as both anaffordable, compact loop calibratorand powerful HART communicationtroubleshooting tool.
In the communicator modethe user will be able to readbasic device information, performdiagnostic tests, and trim the mAoutput on most HART enabledtransmitters. In the past, this couldonly be done with a dedicatedcommunicator, a high-end multifunctioncalibrator, or a laptopcomputer with HART modem.Fluke 709H will allow virtuallyany technician to service and supportHART devices.
In addition, the 709H offers:
| Functions | mA source, mA simulate, mA read, mA read/loop power, and volts read |
| Ranges | mA (0 to 24mA) and Volts (0 to 30VDC) |
| Resolution | 1 µA on mA ranges and 1 mV on voltage range |
| Accuracy | 0.01% +/- 2 counts, all ranges (@23° +/- 5°C) |
| Operating Temperature Range | -10 to 55 °C (14 to 131°F) |
| Humidity Range | 10 to 95% non-condensing |
| Stability | 20 ppm of F.S. /°C from -10 to 18°C and 28 to 55°C |
| Display | 128 x 64 pixels, LCD Graphic w/backlight, .34 high digits |
| Power | 6 AAA alkaline |
| Battery Life | 40 hours typical |
| Loop Compliance Voltage | 24VDC @ 20mA |
| Over-Voltage Protection | 240 VAC |
| Overload Current Protection | 28 mA DC |
| Dimensions (L x W x D) | 15 cm x 9 cm x 3 cm (6 x 3.6 x 1.3) |
| Weight | 0.3 kg (9.5 ounces) |
Click on a category to view a selection of compatible accessories with the Fluke 709H Loop Calibrator with HART Communication.
We accept these payment methods:
We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
