Model: I5SPQ3
A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers.
| Specifications | |
| Nominal current range | 5 A |
| Continuous current range | 10 mA to 6 A |
| Maximum Non-Destructive Current | 70 A |
| Lowest measurable current | 10 mA |
| Basic accuracy | 48 Hz to 65 Hz 10 mA to 1 A 1% + 5 mA 1 A to 5 A 1% |
| Useable frequency | 40 Hz to 5 kHz |
| Output level(s) | 400 mV/A |
| Input Load Impedance | > 1 MΩ in parallel with up to 47 pF |
| Crest Factor | ≤ 3, add 0.7% to accuracy |
| Safety Specifications | |||
| Safety |
| ||
| Maximum voltage |
|
| Mechanical & General Specifications | |||
| Warranty |
| ||
| Maximum conductor diameter |
| ||
| Output cable length |
| ||
| BNC Adapter |
| ||
| BNC to banana adapter included |
|
Click on a category to view a selection of compatible accessories with the Fluke i5sPQ3, 5A AC Current Clamps, 3-pack.