Fluke FLUKE-87V/PRV240 Industrial Multimeter and Proving Unit Kit

Fluke 87V

Identifies complex signal problems fast

Provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment. On top of that, this industrial multimeter effectively performs in loud, high energy, and high altitude locations. Features a low pass filter which supports precise frequency measurements on VFDs and acquires intermittents as quickly as 250 µS.

Use this multimeter to measure AC currents up to 10 A directly. Also, features a built-in thermometer that enables you to take temperature readings without having to carry a separate instrument and more. Plus, comes with a bright, two-level backlit display which allows you to see the results better in dim light.

Correctly measure pulse-width modulated motor drive signal

Takes the guesswork out of drive system troubleshooting. Includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high frequency, high-energy noise generated by large drive systems.

Electrical safety

All the inputs on this industrial multimeter are updated to the third and CAT III, 1000 V. They are designed to withstand spikes in excess of 8 V.

Features

• Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
• True-RMS AC voltage and current for measuring non-linear signals
• Captures intermittents as short as 250 µS
• Safety rated CAT III 1000 V, CAT IV 600 V
• Built-in thermometer and temperature probe
• Easy access door for fast battery changes without breaking the calibration seal
• Removable holster with built in test lead and probe storage for convenience
• Audible Input Alert warning against wrong use of input jacks
• Provides peak capture and Min/Max/Avg recording
• 6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
• Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• Includes an analog bargraph for fast changing or unstable signals
• Presents a large digit display with bright, two-level backlight for easier reading in low light
• Delivers 0.05% DC accuracy
• Measures up to 1000 VAC and DC
• 10,000 µF capacitance range for components and motor caps
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch hold to capture stable readings of noisy signals
• Two-level backlit display

Applications

• Motor drives
• Plant automation
• Power distribution
• Electromechanical equipement

Fluke PRV240

Reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked.

Features

• Sources both AC and DC steady-state voltage - supplies 240 V DC/AC
• A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
• Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
• Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
• Long battery life - 5,000 tests per set of four AA batteries

Test Before Touch

Provides a safe method to verify that your electrical test tool is operating properly before you conduct further tests. The concept of "Test Before Touch" (TBT) or three point test method involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Designed for safety and compliance

Safe and easy method for verifying proper operation of your test tool before attempting to test for either an energized source or a de-energized source without the need for cumbersome PPE, or in cases where no known voltage source is available. Your environment may still require minimal PPE such as hard, safety glasses or earplugs when using a proving unit.

Applications

• Test and measurement

Fluke PRV240

Reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked.

Features

• Sources both AC and DC steady-state voltage - supplies 240 V DC/AC
• A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
• Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
• Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
• Long battery life - 5,000 tests per set of four AA batteries

Test Before Touch

Provides a safe method to verify that your electrical test tool is operating properly before you conduct further tests. The concept of "Test Before Touch" (TBT) or three point test method involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Designed for safety and compliance

Safe and easy method for verifying proper operation of your test tool before attempting to test for either an energized source or a de-energized source without the need for cumbersome PPE, or in cases where no known voltage source is available. Your environment may still require minimal PPE such as hard, safety glasses or earplugs when using a proving unit.

Applications

• Test and measurement