Fluke 1745 Three Phase Power Quality Logger Memobox-

Downloads: datasheet manual

Ask an Expert

Fluke 1745 Three Phase Power Quality Logger Memobox

Model: 1745

Advanced IP50 power quality logger with the measurement of common power parameters: V, A, W, VA, VAR, PF, energy, flicker, voltage events, and THD. Measurement of voltage and current harmonics to the 50th, unbalance, and mains signalling plus real-time LCD, five hour UPS.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Fluke 1738 Advanced Three-Phase Power Logger with current probes

Model: 1738 | Order No: 1738/EUS

Conduct energy studies and power quality logging with this advanced three-phase power logger. Automatically capture and log over 500 power quality parameters with this logger, which provides you with more visibility into the data. Additionally, this unit is Fluke Connect compatible and comes equipped with current probes.

Learn More

Fluke 1745 Offers

The Fluke 1745 Three Phase Power Quality Logger is an advanced IP50 power quality logger with real-time LCD and five hours UPS for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, this allows you to analyze power quality in detail and to correlate intermittent events, helping to identify the root cause of disturbances.
The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard.
The Fluke 1745 Three Phase Power Quality Logger can not only measure the common power parameters but it also measures voltage and current harmonics, interharmonics, mains signaling, unbalance, and frequency.
Apart from the Fluke 1745, the Fluke 1740 series includes two other power quality loggers: Fluke 1743 & Fluke 1743.

The Fluke 1743 is capable of measuring most common power parameters but cannot measure voltage and current harmonics, interharmonics, mains signaling, unbalance or frequency.
The Fluke 1744 is more similar to the 1743 and is a better solution if you need to measure what the 1743 is incapable of measuring.

Applications:

Disturbance analysis - Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
Quality of service compliance - Validate incoming power quality at the service entrance
Power quality studies - Assess baseline power quality to validate compatibility with critical systems before installation
Load studies - Verify electrical system capacity before adding loads
Energy and power quality assessment - Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements

Fluke 1745 Specifications

General Data

Intrinsic error

Refers to the reference conditions and is guaranteed for two years

Warranty

2 years

Recalibration interval

2 years recommended

Quality system

developed, designed, and manufactured according to DIN ISO 9001

Reference conditions

	23 °C ± 2 K; 74 °F ± 2 K , Vm=230 V ± 10%, 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Phase sequence	L1, L2, L3
Interval length	10 minutes
Wye connection	(L1, L2, L3 to N)
Power supply	88 V ... 265 V AC

Environment conditions

Working temp. range	-10 °C to 55°C; 14 °F to 131°F
Operating temp. range	0 °C to 35°C; 32 °F to 95°F
Storage temp. range	-20 °C to 60°C; -4 °F to 140°F
Reference temp. range	23 °C ± 2 K; 74 °F ± 2 K
Relative humidity	Fluke 1745: Class B2 acc. IEC 60654-1 Fluke 1744/43: Class C2 acc. IEC 60654-1

Housing

robust, fully insulated housing and accessories

Protection type

Fluke 1745	IP50 as per EN 60529
Fluke 1744/1743	IP65 as per EN 60529

Safety

IEC/EN 61010-1 600 V CAT III, 300 V CAT IV, pollution degree 2, double insulation

Type test voltage

5.2 kV rms, 50 Hz / 60 Hz, 5 s

EMC

Emission	IEC/EN 61326-1, EN55022
Immunity	IEC/EN 61326-1

Voltage and Current Measurement

Input voltage

Input range VI P-N	max 480 V AC
Input range VI P-P	max 830 V AC
Max. overload voltage	1.2 VI
Input range selection	By job programming
Connections	P-P or P-N, 1- or 3-phase
Nominal voltage VN	<= 999 kV with PTs and ratio
Input resistance	App. 820 kΩ per chan. Lx-N Single phase (L1 or A, L2 or B, L3 or C connected): app. 300 kΩ
Intrinsic uncenrtainty	0.1 % of VI
Voltage transformer	Ratio: <999 kV / VI
Ration selection	By job programming

Current input with Flexi Set

Input ranges II L1 or A, L2 or B, L3 or C, N:	15 A / 150 A / 1500 A / 3000 A ac
Measuring range	0.75 A 3000 A ac
Intrinsic uncertainty	< 2 % of II
Position influence	Max. ± 2 % of measured value - for distance conductor to meas. head > 30 mm
Stray field influence	< ± 2 A ac for Iext=500 A ac and distance to measuring head > 200 mm
Temperature coefficient	< 0.05 % / K
Current transformer	Ratio <= 999 kA / II
Ratio selection	By job programming
Connection	3-phase, 3-phase +N, 2 phase L1 or A and L3 or C (2 W-meter-method) 7 pole connector

Current input for clamp

Input ranges II L1 or A, L2 or B, L3 or C, N:	0.5 V nominal (for II) 1.4 Vpeak
Intrinsic uncertainty	< 0.3 % of II
Max. overload	10 V ac
Input resistance	App. 8.2 kΩ
Current transformer	Ratio Ω 999 kA / II

Power systems

Delta, 2-Element Delta, Wye, Single Phase, Split Single Phase

Logger

Power supply

Functional Range	88 V to 660 V absolute, 50 Hz / 60 Hz 100 V to 350 V dc Internal fuse: 630 mA T
Power consumption	5 Watts
Ride through	Fluke 1745: Internal battery for typ. > 5 hours ride through with intelligent power management Fluke 1743/44: 3 sec Capacitor
Fuse	Power supply fuse can be replaced in service facility only. Supply can be connected in parallel to measuring inputs (up to 660 V)

Display, indicators

LEDs for status and voltage levels
Fluke 1745: LC-display with backlight for voltage, current, active power, phase sequence.

Memory

	Capacity 8 MB Flash-EPROM
Intervals	A function > 12000 intervals for > 85 days with 10 min intervals P function > 30000 intervals for > 212 days with 10 min intervals
Events	> 13000
Memory model	linear, circular

Interface

RS 232, 9600...115 000 Baud, automatic Baud rate selection, 3-wire communication

Dimensions

Fluke 1745	282 mm x 216 mm x 74 mm (115in x 88in x 33in)
Fluke 1743/1744	170 mm x 125 mm x 55 mm (69in x 51in x 22in)

Weight

Fluke 1745	approx. 3 kg
Fluke 1744/1743	approx. 2 kg

Measurement

A/D converter	16 bit, sample rate: 10.24 kHz
Anti-aliasing filter	FIR-Filter, fc =4.9 kHz
Frequency response	Uncertainty < 1 % of Vm for 40 Hz to 2500 Hz
Interval length	1, 3, 5, 10, 30 s, 1, 5, 10, 15, 60 minutes
Averaging time for Min/max values	½, 1 mains period, 200 ms,1 , 3 , 5 s
Time base	Resolution: 10 ms (at 50 Hz), deviation: 2s/day at 23 °C; 74 °F ± 2 K

Click here for complete specifications on the Fluke 1745

What's included with the Fluke 1745

4 Flexible probes 15/150/1500/3000 A with 2 m cable
RS232 interface cable and RS232-USB adapter
Test leads for voltages and power supply
4 black dolphin clips
Color localization kit
Carrying bag
Test certificate with measurement values

View graphs and generate reports with Fluke Power Quality Log software

With its easy-to-use interface, the included Power Quality Log software assists you with logger setup, enables you to verify actual measurement values quickly using the online function, and downloads data from the logger to a connected PC operating on standard Windows® operating systems. You can view the logged data in graphical and tabular form, export it to a spreadsheet, or generate a professional report with the Report Writer function.

For root cause analysis, different measurements such as flicker, voltage and THD can be shown in the same time plot, helping to quickly identify the cause of a disturbance.
Statistical summaries like EN50160 and DISDIP table provide a quick, comprehensive summary. The EN50160 overview display provides a simple display of 8 power quality parameters on one dashboard, according to the latest international power quality standard.
Statistical analysis of Voltage and Current harmonics over a given time period. Red bar graphs indicate issues with the grid. Other colors are warnings for pontential future issues. Harmonics can be presented also as time plots.

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 1745 Three Phase Power Quality Logger Memobox.

Carrying Cases

Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25

Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.