1.888.610.7664

sales@GlobalTestSupply.com

Customer Reviews
 
 

Fluke 28IIEX/ETL Intrinsically Safe True RMS Digital Multimeter

Model: 28IIEX/ETL

Comes with a waterproof, dust proof and drop-proof design, making this True RMS digital multimeter ideal for petroleum, chemical, or pharmaceutical environments. Additionally, it provides all of the troubleshooting power that you need.

Traceable Calibration Certificate for your 28IIEX/ETL Intrinsically Safe True RMS Digital Multimeter


4 to 5 Weeks

$2,671.99 USD





Fluke 28IIEx

Intrinsically Safe True RMS Digital Multimeter

Now there's one intrinsically safe digital multimeter (DMM) you can use in IIC (gas), in Zone 1 and 2 and IIIC (dust), Zone 21 and 22. Whether you work in petroleum, chemical, or pharmaceutical environments, all the test and troubleshooting power you need is packed into the most rugged intrinsically safe (IS) DMM Fluke has ever built. The Fluke 28 II Ex is also waterproof, dust-proof and drop-proof. You'll be equipped to handle any situation, inside and outside of hazardous zones, without compromising compliance or measurement performance.

Fluke 28IIEX/ETL Specifications

Accuracy Specifications
DC Voltage Range: 0.1 mV to 1000 V
Accuracy: ±0.05% + 1
AC Voltage Range: 0.1 mV to 1000 V
Accuracy: ±0.7% + 4
DC Current Range: 0.1 µA to 10 A
Accuracy: ±0.2% + 4
AC Current Range: 0.1 µA to 10 A
Accuracy: ±1.0% + 2
Resistance Range: 0.1 Ω to 50 MΩ
Accuracy: ±(0.2% + 1)
Conductance Range: 60.00 nS
Accuracy: ±(1.0% + 10)
Diode Test Range: 2.0 V
Accuracy: ±(2.0% + 1)
Duty Cycle Range: 0 to 99.9%
Accuracy: Within ±(0.2% per kHz + 0.1%) for rise times <1 µs
Capacitance Range: 10 nF to 9999 µF
Accuracy: ±(1.0% + 2)
Frequency Range: 0.5 Hz to 199.99 kHz
Accuracy: ±(0.005% + 1)
Temperature Range: -328 to 1994°F (-200 to 1090°C)
Accuracy: ±(1.0% + 10)°F [±(1.0% + 10)°C]
Display Counts 6000/19,999 counts in high-resolution mode
Peak Capture Record transients up to 250 us
Min/Max/Avg Recording Display signals up to approximately 100 ms
General Specifications
Power Three AAA batteries
Battery Life 400 hours
Display LCD, with backlight
External Protection Rubber holster
Dimensions 2.5 x 3.93 x 7.8" (6.35 x 10.0 x 19.81 cm)
Weight 1.54 lbs (698.5 g)
Safety Certifications
ATEX II 2 G Ex ia IIC T4 Gb
II 2 D Ex ia IIIC T130°C Db
I M1 Ex ia I Ma
NEC-500 Class I, Div 1, Groups A-D, 130°C
IEXEx Ex ia IIC T4 Gb
Ex ia IIIC T130°C Db
Ex ia I Ma
GOST R Ex Overvoltage protection: Measurement Category III, 1000 V, Pollution Degree 2
Measurement Category IV, 600 V, Pollution Degree 2
IP rating IP67
Click here for complete specifications on the Fluke 28IIEX/ETL

What's included with the Fluke 28IIEX/ETL

  • Multimeter
  • Ex-Holster
  • Alligator Clips
  • Test Leads
  • Batteries
  • Manual
  • CD-ROM

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 28IIEX/ETL Intrinsically Safe True RMS Digital Multimeter.

Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.
$91.27 USD

was $111.99


Learn More

Fluke C101 Hard Carrying Case C101
Compatible with a vareity of Fluke industrial test tools. Additionally, this hard carrying case features a foam interior.
$95.35 USD

was $116.99


Learn More

Fluke C125 Soft Meter Case for Fluke Multimeters C125
Soft zippered carrying case with detachable external pouch. To be used with the 120-series, multimeters and testers.
$57.87 USD

was $71.00


Learn More

Fluke TLK-225 SureGrip Master Accessory Set TLK-225
Perfect replacement kit provides flexibility and comfort with all SureGrip™ leads and probes in a convenient six pocket, roll-up pouch.
$187.44 USD

was $229.99


Learn More

Fluke TL71 Premium Right Angle Test Lead Set TL71
Comfort grip probes with flexible silicone-insulated, right-angle test leads. They are heat and cold resistant, with a safety rating of CAT II 1000 V, 10 A.
$35.85 USD

was $43.99


Learn More

Fluke TL220 Suregrip Industrial Test Lead Set TL220
Includes the Fluke AC220, Fluke TP220, and Fluke TL224.
$89.64 USD

was $109.99


Learn More

Fluke AC285 SureGrip Alligator Clips AC285
Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.
$36.67 USD

was $44.99


Learn More

Fluke TL175 TwistGuard Test Leads Set TL175
Built from WearGuard lead wire and silicone insulation, this test lead has an adjustable tip shroud that retracts and extends from 0.75 to 0.16" when you twist it. Additionally, the patented TwistGuard design allows easy adjustments to reduce or increase tip exposure to comply with new electrical safety requirements.
$37.48 USD

was $45.99


Learn More

Fluke 80PK-9 General Purpose Probe 80PK-9
Featuring a general purpose type-K thermocouple probe for surface, air and non-caustic gases. It has a measuring range of -40 to 260°C.
$91.27 USD

was $111.99


Learn More

Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8
Uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Designed to reliably measure the temperature of pipes ¼" (6 mm) to 1⅜" (35 mm) in diameter, at temperatures between -20 and 300°F (-29 and 149°C), while retaining a long service life.
$207.82 USD

was $254.99


Learn More

Fluke 80PK-3A Surface Temperature Probe 80PK-3A
Compatible with any temperature measuring instrument that accepts type K thermocouples and features a miniature connector input. Additionally, this surface temperature probe is ideal for measuring the temperature of flat or slightly convex surfaces, with an exposed junction to allow direct contact with the surface being measured.
$189.89 USD

was $232.99


Learn More

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27
Compatible with any temperature measuring instrument that accepts type K thermocouples features a miniature connector input and a cold reference junction compensation. Additionally, this industrial surface temperature probe is ideal for surfaces in rugged environments.
$371.63 USD

was $455.99


Learn More

Fluke 80PK-1 Bead Probe 80PK-1
A K type thermocouple ideal for general purpose applications.
$55.41 USD

was $67.99


Learn More

Fluke 80BK-A Integrated DMM Temperature Probe 80BK-A
A K type thermocouple with a standard shrouded banana jack that is compatible with digital multimeters that feature temperature measurement functions. Additionally, this integrated digital multimeter temperature probe comes in a convenient one-piece construction.
$58.67 USD

was $71.99


Learn More

Fluke 80AK-A Thermocouple Adapter 80AK-A
Designed to adapt K type thermocouples mini-connector to dual shrouded banana plug inputs. Additionally, it is ideal for low voltage applications below 30 V AC and 60 V DC.
$42.37 USD

was $51.99


Learn More


Ask a question about the Fluke 28IIEX/ETL Intrinsically Safe True RMS Digital Multimeter :

Customer Reviews for the Fluke 28IIEX/ETL