Fluke 700PRV-1 Pressure Relief Valve Kit

Fluke 700PRV-1 Offers

Repeatability 10% of nominal setting. Multi-turn adjustment screw to set preload on internal disc springs.
Included: The 700PRV contains two relief valves.

• One adjustable from 725-2900 psi/50-200 bar (preset at 1360 psi/94 bar)
• One adjustable from 2900-5800 psi/200-400 bar (preset at 5450 psi/376 bar)
• Instruction sheet

The Fluke 700PRV-1 consists of a relief valve settable from 725 to 5800 PSI (50 to 200 bar) to be used with the 700HTP-1 Hydraulic Test Pump. The 1/8" NPT male thread to fits directly into the Fluke 700HTP-1 pressure pump.

To be used with the 700HTP-1 Hydraulic Test Pump. The 700PRV uses a multi-turn adjustment screw to set pre-load on internal disc springs. This relief valve will protect the most commonly used Fluke pressure modules and pressure instruments from damage due to accidental over-pressurization.

Features

• Adjustable from 725 to 5800 PSI (50 to 200 bar)
• Preset at 2,900 psi/200 bar)
• Repeatability to 10% of nominal setting.
• Installs directly into the 700HTP-1 pump

Includes

• One adjustable relief valve
• Instruction sheet