Fluke 83V Accessories

Fluke 85RF High-Frequency Probe, 500 Mhz
Model: 85RF-II

A high-frequency probe designed to convert a DC voltmeter with an input impedance of 10 MΩ into a high frequency (100 kHz to 500 Mhz) RF voltmeter. Additionally, it's probe's DC output is calibrated to equal the RMS value of sine wave input.

Fluke CXT80
Model: CXT80

Rugged Pelican Hard Case for the Fluke 80/180 Series.

Fluke TL935 Patch Cord Kit
Model: TL935

Kit of 60, 90, and 120cm cords. 30V RMS or 60V DC, and 15A.

Fluke TL932 Patch Cord Set 36" (90 cm)
Model: TL932

36" (90 cm) (30V rms or 60V DC, 15A).

Fluke TL930 Patch Cord Set (60 cm)
Model: TL930

30V RMS or 60V DC, and 15A.

Fluke H900 Test Lead Holder
Model: H900

Fluke AC87 Heavy Duty Bus Bar Clip Set
Model: AC87

Comes equipped with one pair (red, black) of flat, right angle design for connecting to bus bars, and CAT III 600 V, 5 A rating, CSA listed. Adjustable collar provides two ranges of jaw openings up to 1.81" (30 mm).

Fluke AC285 SureGrip Alligator Clips
Model: AC285

Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.

Fluke AC283A SureGrip Pincer Clips
Model: AC283A

Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.

Fluke AC280 SureGrip Hook Clips
Model: AC280

Designed to improve steadiness in slippery hands, and is for use with TL222 and TL224 test leads. Rubber over-molded surfaces and finger-hugging curves give a comfortable, reliable grip so you can focus on making an accurate measurement.

Fluke AC220 SureGrip Alligator Clips
Model: AC220

Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves. For use with TL222 and TL224 test leads.

Fluke TLK-220 US SureGrip Industrial Test Lead Kit
Model: TLK-220

A handy all-in-one kit that is ideal for industrial applications. Additionally, this test lead kit comes equipped with AC220 SureGrip alligator clip set, AC285 SureGrip large jaw alligator clip set, TP220 sharp test probes, TL224 SureGrip silicone right to straight test leads, and a carrying case.

Fluke TP80 Electronic Test Probe Set
Model: TP80

Fluke TP4 Slim Reach Test Probe Set
Model: TP4

Features hard stainless steel probe tips, this slim reach test probes set is designed to fit securely into IEC electrical wall outlets.

Fluke TL26A 5-Way Test Lead Set, 60"
Model: TL26A

Provides five different ways to connect to terminals, this test lead set features 60" (1.5 m), silicone-insulated leads, useable from -112 to 158°F (-80 to 70°C), and is rated for 30 V, 8 A.

Fluke TL940 Mini-Hook Test Lead Set
Model: TL940

30V RMS or 60V DC, and 15A.

Fluke TL950 Mini-Pincer Test Lead Set
Model: TL950

30V RMS or 60V DC, and 15A.

Fluke TL960 Micro-Hook Test Lead Set
Model: TL960

30V RMS or 60V DC, and 15A.

Fluke TP220 SureGrip Industrial Test Probes
Model: TP220

For use with the TL222 and TL224. Additionally, these industrial test probes feature 0.5" (12 mm) stainless steel tips that provide reliable contact and flexible finger barrier, which improves grip.

Fluke TP2 Slim Reach Test Probe Set
Model: TP2

Ideal for probing closely spaced or recessed terminals, this slim reach test probe set also features hard stainless steel probe tips.