Test Leads and Probes

Fluke 810SMP Sensor Mounting Pads for the 810, 10-pack
Model: 810SMP

For use with the 810 vibration tester and comes in a pack of 10.

Fluke 85RF High-Frequency Probe, 500 Mhz
Model: 85RF-II

A high-frequency probe designed to convert a DC voltmeter with an input impedance of 10 MΩ into a high frequency (100 kHz to 500 Mhz) RF voltmeter. Additionally, it's probe's DC output is...

Fluke AC120 Alligator Clips
Model: AC120

Set of three (red, gray, black) safety designed insulated alligator clips for use with STL 120 Shielded Test Leads and TL75 Test Leads. Features a nickel-plated steel jaw contact material with a...

Fluke AC173 Bucktooth Alligator Clip Set
Model: AC173

Fluke AC285-FTP Fluke AC285-FTP Alligator Clips and Adaptors
Model: AC285-FTP

Fluke AC87 Heavy Duty Bus Bar Clip Set
Model: AC87

Comes equipped with one pair (red, black) of flat, right angle design for connecting to bus bars, and CAT III 600 V, 5 A rating, CSA listed. Adjustable collar provides two ranges of jaw openings...

Fluke AC89 Heavy Duty Insulation Piercing Test Clip
Model: AC89

Single probe pierces 0.01 to 0.6" (0.25 to 1.5 mm) insulated wire with a small pin allows self-healing of the insulation, and 1000 V, 10 A maximum.

FE AS400
Model: AS400

Probe Accessory set for VPS400 Probes.

Fluke BP980 Double Banana Plug Kit
Model: BP980

Fluke BT500-PROBETIP Replacement Probe Tips for BT500 series, 10-pack
Model: BT500-PROBE-TIP

Ten replacement probe tips for the 500 series battery analyzers. For use with the BTL10, BTL20, and BTL21 test probes.

Fluke BTL20ANG Interactive Battery Analyzer Test Probe with angled tip
Model: BTL20ANG

Designed for use with the 500 Series battery analyzers, this intelligent test probe set is ideal for maintaining, troubleshooting, and performance testing individual storage batteries. With...

Fluke EI-162AC Clip on Current Transformer
Model: EI-162AC

Fluke El-162X Clip-On CT with Shielded Cable
Model: EI-162X

Fluke FS17X5-TF-II Four-Phase Thin Flexible AC Current Clamp, 3000 A
Model: FS17X5-TF-II

For use with the 1735 and 174 and has 24" length of measuring head and a cable length of 79".

Fluke FS17XX-1PH-TF-II Shielded 4-Phase Flexi Set for 17XX
Model: FS17XX-1PH-TF-II

1 Phase Thin Flexible Current Clamp, 3000A AC Current. For the Fluke 1735 & 174X Power Quality Logger Memobox.

Fluke FTP-1 Fuse Test Probe Set
Model: FTP-1

Fluke FTPL-1 Fuse Test Probe Set with test leads
Model: FTPL-1

Features built-in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating, and the probes allow indication of live voltage even with a blown fuse.

Fluke GS38CAP Probe Tip Cap Set Red And Black
Model: GS38CAP

Fluke I17XX-FLEX1.5KIP iFlex Current Clamp, 1500A, 24"
Model: I17XX-FLEX1.5KIP

Connects to a 173X Energy or Power Logger.

Fluke I17XX-FLEX1.5KIP/3PK Long Flexible Current Probes, 1500A, 24", Three Pack
Model: I17XX-FLEX1.5KIP/3PK

The Fluke 17XX 24 inch iFlex flexible current probes measure to 1500A AC while providing the ultimate measurement flexibility. The iFlex probes connect directly to the 174x energy or power logger,...