Fluke 1000FLT Fluorescent Light Tester

Model: 1000FLT | Order No: 1000FLT

Saves time and reduces costs: Perform 5 essential lighting tests in under 30 seconds to pinpoint problems and verify operation when done. Survives on-the-job handling: Drop-tested to survive from a six foot (two meter) ladder.

$224.99 USD

was $249.99

3 in Stock




 

Fluke 1000FLT Fluorescent Light Tester

The most complete light tester, incorporating all tests and functions needed to find rood cause.

With the 1000FLT you'll be able to test whether a bulb is functioning, determine if ballast is working, check for voltage presence, test filament continuity, and determine if ballast is magnetic or electronic. All of these features will enable you to save time and reduce costs by using only one tester to perform all essential lighting tests in less than 30 seconds.

Rugged design means that the 1000FLT meets Fluke durability standards. The unit itself has been drop tested to survive a fall from six feet (2m), while the extendable rod is all metal and very rugged. However, should the need arise the metal rod can be easily replaced. Finally, Fluke backs the 1000FLT with a three year warranty.


Features:

  • Lamp test: test bulb without removing from fixture
  • Ballast test: easily determine if ballast is working
  • Non-contact voltage: quickly check for voltage presence
  • Pin continuity test: tests if filaments have continuity
  • Ballast-type test: determine if ballast is electronic or magnetic without taking fixture apart identify energy wasting ballasts
  • Survives on-the-job handling: drop-tested to survive from a six foot (two meter) ladder
  • Easy to use: bright indicator light plus audible alert
  • Rugged: backed with a three-year warranty

Included:

  • 1000FLT Fluorescent Light Tester
  • Quick reference guide
  • Four AA alkaline batteries
  • H1000 Holster
  • Warranty card (3 year warranty)

Fluke 1000FLT Specifications

Lamp Test Output 3000 V peak-peak
Ballast Test 20 kHz
Ballast Discriminator S3m (10 ft) distance
Pin Continuity Test < 1kOhm
NCV Range 85 to 400VAC, 45/67Hz ≤10cm (4") distance
Click here for complete specifications on the Fluke 1000FLT

Ask a question about the Fluke 1000FLT Fluorescent Light Tester:

comments powered by Disqus

Review the Fluke 1000FLT Fluorescent Light Tester

" data-description="Saves time and reduces costs: Perform 5 essential lighting tests in under 30 seconds to pinpoint problems and verify operation when done. Survives on-the-job handling: Drop-tested to survive from a six foot (two meter) ladder.">