Fluke 83-5 Multimeter Kit - Includes FREE Products with Purchase

Model: 83-5-KIT

Measure up to 1000V AC and DC featuring a CAT III 1000V and CAT IV 600V safety rating. This value added kit includes the REED R2002 IR Thermometer, Fluke 1AC-A1-II Voltage Detector, and REED CA-05A Carrying Case for FREE.

Add In House NIST Traceable Calibration to your 83-5


$399.99 USD

Free Product Value $40.00

Availability: 3 in Stock





 

Fluke 83-5-KIT Offers

Purchase a Fluke 83-5 Digital Multimeter and receive FREE: a REED R2002 IR Thermometer, a Fluke 1AC-A1-II Voltalert Voltage Detector, and a REED CA-05A Carrying Case.

Fluke 83-5 Offers

Industrial electricians around the world trust the Fluke 83V Industrial Multimeter from the control room to the plant floor. With its accuracy and troubleshooting capabilities, the Fluke 83V Industrial Multimeter works when you need it, even in loud, high energy, and high altitude locations.

  • Measure up to 10 A, 20 A for up to 30 seconds
  • Frequency to 200 kHz and % duty cycle
  • Resistance, continuity and diode test
  • 10,000 µF capacitance range for components and motor caps
  • Min/Max-Average recording with Min/Max Alert to capture variations automatically
  • Peak capture to record transients as fast as 250 µs
  • Relative mode to remove test lead interference from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Touch Hold to capture stable readings avoiding noisy signals
  • Large display digits and two-level bright white backlight for increased visibility
  • Analog bargraph for fast changing or unstable signals
  • Input Alert provides audible warning against wrong use of input jacks
  • Improved selectable sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • "Classic" design with new removable holster with built in test lead and probe storage

REED R2002 IR Thermometer

  • Temperature Range: -58 to 932°F (-50 to 500°C)
  • Built-in laser pointer identifies target area
  • 8: 1 spot Dimensions ratio
  • User selectable °F or °C
  • Includes: Battery and Case

Fluke 1AC-A1-II VoltAlert Voltage Detector

  • Voltbeat™ technology and continuous self-test so you always know it's working
  • Upon detection of voltage, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range: 90 V to 1000 V AC

REED CA-05A Carrying Case

Dimensions: 9 x 4 x 2" (250 x 130 x 65MM)

Fluke 83-5 Specifications

Volts Range and Resolution 600.0mV, 6.000V, 60.00V, 600.0V, 1000V
Volts Basic Accuracy AC: 0.5%
DC: 0.1%
Current Range and Resolution 600.0µA, 6000µA, 60.00mA, 600.0mA, 6.000A, 10.00A
Current Basic Accuracy AC: 1.2%
DC: 0.4%
Resistance Range and Resolution 600.0W, 6.000kW, 60.00kW, 600.0kW, 6.000MW, 50.00MW
Resistance Basic Accuracy 0.4%
Capacitance Range and Resolution 10.00nF, 100.0nF, 1.000µF, 10.00µF, 100.0µF, 9,999µF
Capacitance Basic Accuracy 1.0%
Frequency Range and Resolution 199.99Hz, 1.9999kHz, 19.999kHz, 199.99kHz
Frequency Basic Accuracy 0.005%
Click here for complete specifications on the Fluke 83-5-KIT

This Fluke 83-5 Multimeter Kit Includes


Fluke 83-5 Digital Multimeter

Fluke 83-5 Digital Multimeter

Measure up to 1000V AC and DC featuring a CAT III 1000V and CAT IV 600V safety rating.


REED R2002 Infrared Thermometer

REED R2002 Infrared Thermometer

The Infrared Thermometer features a built-in laser pointer that assists in identifying the target area and thus provides a quick and precise technique for measuring surface temperatures without contact.


Fluke 1AC-A1-II AC Voltage Detector

Fluke 1AC-A1-II AC Voltage Detector

Continually tests its battery and circuit integrity with a periodic double flash visual indication. A Category IV - 1000V over voltage rated product for added user protection, the highest rated of its kind.


REED CA-05A Carrying Case

REED CA-05A Carrying Case

Outside Dimensions (LxWxH): 9x 4 x 2" (228 x 102 x 51mm), Black polyester.

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 83-5 Multimeter Kit - Includes FREE Products with Purchase.

Fluke TL910 Electronic Test Probe Set TL910
Comfortable and allows accessibility to hard to reach test points.
$69.99 USD

Learn More


Fluke TP4 Slim Reach Test Probe Set TP4
Designed to fit securely into IEC electrical wall outlets.
$19.99 USD

Learn More

Fluke TL224 SureGrip Silicone Insulated Test Leads TL224
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP2 Slim Reach Test Probe Set TP2
For probing closely spaced or recessed terminals compatible with AC72.
$19.99 USD

Learn More

Fluke TL75 Hard Point Test Lead Set TL75
Comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs.
$24.99 USD

Learn More


Fluke TL221 Suregrip Silicone Test Lead Extension Kit TL221
Test Lead Extension Kit designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set TP1
For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$19.99 USD

Learn More

Fluke TL40 Retractable Tip Test Lead Set TL40
Adjustable to desired length from 0 to 76mm.
$44.99 USD

Learn More

Fluke TL970 Hook and Pincer Kit TL970
Kit includes TL940 Mini-Hook Test Lead Set, TL950 Mini-Pincer Test Lead Set, and TL960 Micro-Hook Test Lead Set.
$89.99 USD

Learn More

Fluke TL222 SureGrip Silicone Insulated Test Leads TL222
Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke 80PK-3A Surface Probe 80PK-3A
Flat Surface Temperature Probe.
$143.99 USD

was $159.99


Learn More

Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25
K-Type, Piercing Temperature Probe, SureGrip.
$107.99 USD

was $119.99


Learn More

Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8
Pipe Clamp Temperature Probe.
$161.99 USD

was $179.99


Learn More

Fluke 80PK-1 Bead Probe 80PK-1
K-Type General Purpose Thermocouple Bead Temperature Probe.
$34.99 USD

Learn More

Fluke 80PK-9 General Purpose Probe 80PK-9
General Purpose, Surface/Air/Gas/HVAC, Temperature Probe.
$69.99 USD

Learn More

Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24
K-Type, Air and Gas Temperature Probe.
$107.99 USD

was $119.99


Learn More

Fluke 80PK-EXT Extension Wire Kit 80PK-EXT
Extension kit for type K thermocouple wires. Includes 3m of thermocouple wire and a pair of male/female mini-connectors.
$59.99 USD

Learn More

Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22
Type K Immersion Temperature Probe designed with a superior gripping surface made from thermoplastic rubber.
$99.99 USD

Learn More

$242.99 USD

was $269.99


Learn More


$134.99 USD

was $149.99


Learn More

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27
K-Type, Industrial Surface Temperature Probe.
$296.99 USD

was $329.99


Learn More

Fluke 80CK-M type K Male Mini-Connectors 80CK-M
Yellow connectors with isothermal screw terminal. Pack of 2.
$29.99 USD

Learn More

Fluke i3000s AC Current Clamp I3000S
3000A AC current clamp with BNC terminated lead
$562.49 USD

was $624.99


Learn More

Fluke i2000 FLEX Flexible AC Current Probe I2000-FLEX
2000A flexible AC current transformer for Fluke power quality analyzers.
$359.99 USD

was $399.99


Learn More

Fluke i200s AC Current Clamp I200S
200A AC current clamp with BNC terminated lead.
$224.99 USD

was $249.99


Learn More

Fluke i1010 AC/DC Current Clamp I1010
For use with Digital Multimeters and Calibrators. Features a Current Range of 1A to 600A AC and 1A to 1000A DC.
$382.49 USD

was $424.99


Learn More

Fluke i3000s Flex-24 Flexible AC Current Probe, 24 inch length I3000S-FLEX-24
Flexible 24" 3000A AC current probe with BNC terminated lead.
$472.49 USD

was $524.99


Learn More

Fluke i1000s AC Current Clamp I1000S
1000A AC Current Clamp with BNC terminated lead.
$517.49 USD

was $574.99


Learn More

Fluke i400 AC Current Clamp I400
1 Amp to 400 Amps for use with DMMs.
$143.99 USD

was $159.99


Learn More

Fluke i3000s Flex-36 AC Current Clamp, 36" I3000S-FLEX-36
36" length, 3000A max, switchable current range for 30A, 300A or 3000A using a 1mA/A, 10mV/A or 100mV/A output and BNC connector.
$562.49 USD

was $624.99


Learn More

Fluke i1010-KIT Current Clamp Kit I1010-KIT
Includes carrying case.
$404.99 USD

was $449.99


Learn More

Fluke i410 AC/DC Current Clamp I410
1 to 400 Amps DC/1 to 400 Amps AC. For use with digital multimeters, scope meters and power quality analyzers.
$242.99 USD

was $269.99


Learn More

Fluke i200 AC Current Clamp I200
Fuke i200 AC Current Clamp 1 A to 200A compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
$143.99 USD

was $159.99


Learn More

Fluke i400S AC Current Clamp I400S
400A AC current clamp with BNC terminated lead.
$260.99 USD

was $289.99


Learn More

Fluke TL81A Deluxe Electronic Test Lead Set TL81A
Test Lead Set in quad-fold nylon pouch works with DMMs that accept safety shrouded, standard diameter banana connectors.
$134.99 USD

was $149.99


Learn More

Fluke TLK291 fused test probe set TLK291
For use with Fluke multimeters and test leads.
$79.99 USD

Learn More

Fluke TL80A Basic Electronic Test Lead Set TL80A
1 meter long silicone test lead set, alligator clip and probe tip extender in a soft carrying case.
$79.99 USD

Learn More

Fluke 80K-6 KV High Voltage Probe 80K-6
High Voltage Probe for Digital Multimeters, 6kV DC/AC.
$116.99 USD

was $129.99


Learn More

Fluke TL76 All-in-one Test Lead Set TL76
2mm/4mm 1.5 meter long silicone test leads with right angle shrouded banana plug.
$34.99 USD

Learn More

$224.99 USD

was $249.99


Learn More

Fluke TL71 Premum DMM Test Lead Set TL71
Comfort grip probes with silicone insulated, right-angle test leads.
$29.99 USD

Learn More

Fluke 80K-40 High Voltage Probe 80K-40
High Voltage Probe for Digital Multimeters, 40kV DC, 28kV AC.
$197.99 USD

was $219.99


Learn More

Fluke TL238 Test Lead Set for High Energy Environment TL238
Designed for high energy environments. Kit includes Fluke TP238, TP280, TL224.
$79.99 USD

Learn More

Fluke TLK225 SureGrip Master Accessory Kit TLK-225
Kit includes Fluke AC220, AC280, AC283, AC285, TP175, and TL224 all in a 6-Pocket Storage Pouch.
$143.99 USD

was $159.99


Learn More

Fluke TL223 Suregrip Electrical Test Lead Set TL223
includes Fluke AC220, TP1, TL224.
$79.99 USD

Learn More

Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit TL225
Voltage Adapter Test Lead Kit makes sure the meter has a low input impedance that eliminates stray voltages and indicates real voltage.
$107.99 USD

was $119.99


Learn More

Fluke TL220 Suregrip Industrial Test Lead Set TL220
Includes Fluke AC220, Fluke TP220, and Fluke TL224.
$79.99 USD

Learn More

Fluke C25 Large Soft Case C25
For use with Fluke Multimeters.
$39.99 USD

Learn More




Fluke C50 Meter Case C50
Case with Full Wrap-around zipper & elastic holding band.
$39.99 USD

Learn More



Fluke C100 Hard Sided Carrying Case C100
Carrying Case for all handheld multimeters.
$59.99 USD

Learn More

Fluke C550 Premium Tool Bag C550
Tool Bag with steel reinforced frame.
$99.99 USD

Learn More



Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89
Insulated, Shrouded Banana Jack. One Red.
$44.99 USD

Learn More


Ask a question about the Fluke 83-5 Multimeter Kit - Includes FREE Products with Purchase:

comments powered by Disqus

Review the Fluke Corporation 83-5-KIT

" data-description="Measure up to 1000V AC and DC featuring a CAT III 1000V and CAT IV 600V safety rating. This value added kit includes the REED R2002 IR Thermometer, Fluke 1AC-A1-II Voltage Detector, and REED CA-05A Carrying Case for FREE.">