Fluke 805FC Vibration Meter Kit - Includes R8050 Sound Level Meter for FREE

Model: 805FC-KIT

Provides repeatable, severity-scaled readings of overall vibration and bearing condition. Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement. Features Fluke Connect. This value added kit includes the REED R8050 Sound Level Meter for FREE.

$1,999.99 USD

Free Product Value $159.00

2 in Stock




 

Fluke 805-KIT Offers

Purchase a Fluke 805 Vibration Tester and receive a REED R8050 Sound Level Meter FREE.

Fluke 805FC Offers

Includes Fluke Connect, which allows you to wirelessly share measurements, create work orders, and report potential problems, all through your smart phone.

  • Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
  • Consistent data quality at both low and high frequency ranges
  • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
  • Exportable data via USB
  • Trending in Microsoft® Excel using built-in templates
  • Units of measurement: Acceleration: g, m/sec2; Velocity: in/sec, mm/sec; Displacement: mils, mm
  • Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
  • Coloured lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
  • Temperature measurement with Spot IR Sensor increases diagnostic capabilities
  • On-board memory holds and saves up to 3,500 measurements
  • Audio output for listening to bearing tones directly
  • External accelerometer support for hard to reach locations
  • Flashlight for viewing measurement locations in dark areas
  • Large screen with high resolution for easy navigation and viewing

REED R8050 Sound Level Meter

Meets ANSI, and IEC Type 2 standards and features a dual range measurement (Hi/Lo) and a large, easy-to-read LCD display.

  • Meets IEC651 Type 2 requirements
  • Dual range measurement (Hi/Lo)
  • "A & C" frequency weighting
  • Large, easy-to-read LCD display
  • 1/2" electret condenser microphone for high accuracy and long-term stability
  • Data Hold, Max Hold functions and low battery indication
  • Tripod mount for long-term monitoring includes microphone windshield ball, battery and carrying case
  • R8050-KIT includes R8050 and SC-05 sound level calibrator

Fluke 805FC Specifications

Low Frequency Range (overall measurement) 10 to 1,000 Hz
High Frequency Range (CF+ measurement) 4,000 to 20,000 Hz
Severity Levels Good, satisfactory, unsatisfactory, unacceptable
Vibration Limit 50g peak (100g peak-peak)
A/D Converter 16-bit
Signal to Noise Ratio 80 dB
Sampling Rate Low frequency: 20,000 Hz
High frequency: 80,000 Hz
Real Time Clock Backup Coin battery
Sensor
Sensitivity 100mV g ±10%
Measurement Range 0.01 to 50g
Low Frequency Range (overall measurement) 10 to 1,000 Hz
High Frequency Range 4,000 to 20,000 Hz
Resolution 0.01g
Accuracy At 100Hz ±5% of measured value
Amplitude Units
Acceleration g, m/sec2
Velocity in/sec, mm/sec
Displacement mils, mm
IR Temperature Measurements
Range -20 to 200°C (-4 to 392°F)
Accuracy ±2°C (4°F)
Focal Length Fixed, at ~3.8 cm (1.5 in)
External Sensor
Frequency Range 10 to 1,000 Hz
Bias Voltage
(to supply power)
20V DC to 22V DC
Bias Current (to supply power) Maximum 5 mA
Click here for complete specifications on the Fluke 805FC-KIT

This Fluke 805FC Vibration Meter Kit Includes


Fluke 805FC Vibration Meter with Fluke Connect

Fluke 805FC Vibration Meter with Fluke Connect

Provides repeatable, severity-scaled readings of overall vibration and bearing condition. Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement. Features Fluke Connect.


REED R8050 Sound Level Meter

REED R8050 Sound Level Meter, 35 to 135dB

This sound level meter meets ANSI, and IEC Type 2 standards and features a dual range measurement (Hi/Lo) and a large, easy-to-read LCD display.

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 805FC Vibration Meter Kit - Includes R8050 Sound Level Meter for FREE.

Fluke 805ES External Vibration Sensor for 805 Vibration Meter 805ES 87885
Ideal for situations when the sensor tip of the 805 Vibration Meter is difficult to access.
$1,299.99 USD

Learn More


Ask a question about the Fluke 805FC Vibration Meter Kit - Includes R8050 Sound Level Meter for FREE:

comments powered by Disqus

Review the Fluke 805FC Vibration Meter Kit - Includes R8050 Sound Level Meter for FREE

" data-description="Provides repeatable, severity-scaled readings of overall vibration and bearing condition. Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement. Features Fluke Connect. This value added kit includes the REED R8050 Sound Level Meter for FREE.">