Fluke 754 Process Calibrator Kit - Includes R2050 Thermal Imager for FREE

Model: 754-KIT4

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments. Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters. This value added kit includes the REED R2050 Thermal Imager for FREE.

This product is available in the United States and Canada only.

Add In House NIST Traceable Calibration to your 754

Clear selected options


$6,999.99 USD

Free Product Value $700.00

1 in Stock




 

The Fluke 754-KIT4 Offers

Purchase a Fluke 754 Process Calibrator and receive a FREE REED R2050 Thermal Imaging Camera.

Fluke 754 Temperature Calibrator

The 754 supports HART protocol commands version 5.7. It supports a substantial set of HART instructions including universal commands, common practice commands, and some device specific commands.

  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results.
  • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
  • Three year warranty
  • Bright white dual display. Read both sourced and measured parameters simultaneously.
  • Multi lingual interface
  • Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
  • Delivered with DPC/Track Sample software.
  • Compatible with many Asset Management software packages.

REED R2050 Thermal Imager

Features a 80 x 80 (6,400 pixels) infrared detector that can detect temperatures between -20 and 350°C (-4 to 662°F).

  • Infrared resolution of 80 x 80 (6400 pixels)
  • High thermal sensitivity (NETD) of <0.1°C @ +30°C (+86°F) / 100mK
  • 2.8" colour 240 x 320 pixel LCD display
  • Built-in laser and white LED flashlight
  • Built-in visible light 5 Megapixel digital camera
  • 32X continuous digital zoom
  • Infrared and visual images, picture-in-picture, as well as visual image with infrared overlay
  • Automatic hot/cold spot indicator
  • Automatic level/span function
  • Automatic power off
  • Choice of four colour palettes including custom
  • Video recording with voice annotations
  • Micro SD memory card extension possible
  • < Class 2 laser
  • Set-up Commands: Local adaptation of units, language, date and time formats, information of camera
  • Multinational languages
Applications

This quality handheld thermal imager is a beneficial tool for electrical inspection, mechanical inspection, building inspection, predictive maintenance, equipment troubleshooting, and verification.

Fluke 754 Specifications

Range and 1 Year Accuracy
DC Voltage Measurement 100.00mV: 0.02% + 0.005mV
3.00000V: 0.02% + 0.00005V
30.0000V: 0.02% + 0.0005V
300.00V: 0.05% + 0.05V
AC Voltage Measurement 3.000V: 0.5% + 0.002V
30.00V: 0.5% + 0.02V
300.0V: 0.5% + 0.2V
DC Current Measurement 30.000mA: 0.01% + 5uA
110.00mA: 0.01% + 20uA
Resistance Measurement 10.000Ω: 0.05% + 50mΩ
100.00Ω: 0.05% + 50mΩ
1.0000kΩ: 0.05% + 0.5Ω
10.000kΩ: 0.1% + 10Ω
Frequency Measurement 1.00Hz to 110.00Hz: 0.05Hz
110.1Hz to 1100.0Hz: 0.5Hz
1.101kHz to 11.000kHz: 0.005kHz
11.01kHz to 50.00kHz: 0.05 kHz
DC Voltage Output 100.000mV:  0.015% + 0.005mV
1.00000V: 0.015% + 0.0005V
15.0000V: 0.015% + 0.0005V
DC Current Output 22.000mA: 0.01% + 0.003mA
Current sint (simulate transmitter): 0.01% + 0.007mA
Resistance Sourcing 10.000Ω: 0.01% + 10mΩ
100.00Ω: 0.01% + 20mΩ
1.0000kΩ: 0.02% + 0.2Ω
10.000kΩ: 0.02% + 3Ω
Frequency Sourcing Sinewave: 0.1Hz to 10.99Hz: 0.01 Hz
Squarewave: 0.01Hz to 10.99Hz: 0.01Hz
Sine and square 11.00Hz to 109.99Hz: 0.1Hz
Sine and square 110.0Hz to 1099.9Hz: 0.1Hz
Sine and square 1.100kHz to 21.999kHz: 0.002kHz
Sine and square 22.000kHz to 50.000kHz: 0.005kHz
Click here for complete specifications on the Fluke 754-KIT4

This Fluke 754 Process Calibrator Kit Includes


Fluke 724 Temperature Calibrator

Fluke 754 Handheld Multi-Function Process Calibrators with HART Calibration

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments. Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters.


REED R2050 Thermal Imaging Camera

REED R2050 Thermal Imaging Camera, 6400 Pixels (80 x 80)

Features a 80 x 80 (6,400 pixels) infrared detector that can detect temperatures between -20 and 350°C (-4 to 662°F). Thermal and visual images are displayed on a vivid 2.8" LCD display and are saved on the included Micro SD card. In addition, the R2050 comes with a 5.0 megapixel digital camera, 32X digital zoom and the ability to record video with audio.

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 754 Process Calibrator Kit - Includes R2050 Thermal Imager for FREE.

Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24 1374
K-Type, Air and Gas Temperature Probe.
$107.99 USD

was$119.99


Learn More



Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25 1375
K-Type, Piercing Temperature Probe, SureGrip.
$107.99 USD

was$119.99


Learn More

$29.99 USD

Learn More


$29.99 USD

Learn More

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27 1377
K-Type, Industrial Surface Temperature Probe.
$296.99 USD

was$329.99


Learn More


Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8 1381
Pipe Clamp Temperature Probe.
$161.99 USD

was$179.99


Learn More

Fluke 80PK-1 Bead Probe 80PK-1 1372
K-Type General Purpose Thermocouple Bead Temperature Probe.
$34.99 USD

Learn More

Fluke 80PK-9 General Purpose Probe 80PK-9 1382
General Purpose, Surface/Air/Gas/HVAC, Temperature Probe.
$69.99 USD

Learn More

Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22 1373
Type K Immersion Temperature Probe designed with a superior gripping surface made from thermoplastic rubber.
$99.99 USD

Learn More

Fluke 80PK-EXT Extension Wire Kit 80PK-EXT 1383
Type K.
$59.99 USD

Learn More

Fluke TL940 Mini-Hook Test Lead Set TL940 2027
30V RMS or 60V DC, and 15A.
$24.99 USD

Learn More

Fluke TL950 Mini-Pincer Test Lead Set TL950 2028
30V RMS or 60V DC, and 15A.
$44.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More


Fluke AC280 SureGrip Hook Clips AC280 1401
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$34.99 USD

Learn More


Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

$539.99 USD

was$599.99


Learn More

$359.99 USD

was$399.99


Learn More

Fluke 700HTP-2 Hydraulic Test Pump 700HTP-2 11184
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31.
$1,099.95 USD

Learn More


$449.99 USD

was$499.99


Learn More

Fluke 700PRV-1 Pressure Relief Valve Kit 700PRV-1 1326
To be used with Fluke 700HTP-1 Hydraulic Test Pump.
$629.99 USD

was$699.99


Learn More

$79.99 USD

Learn More

Fluke C700 Hard Carrying Case C700 1448
For use with the Fluke 700 Series.
$224.99 USD

was$249.99


Learn More

Fluke C781 Meter Case C781 1452
Zippered with detachable pouch.
$69.99 USD

Learn More

Fluke 750SW Dpc/Track2 750SW 11677
The 753, 754 and 743,744 work with the Fluke DPC/TRACK2 software to create procedures, instructions, and action lists to deliver fast, easy documentation.
$3,499.99 USD

Learn More


Ask a question about the Fluke 754 Process Calibrator Kit - Includes R2050 Thermal Imager for FREE:

comments powered by Disqus

Review the Fluke 754 Process Calibrator Kit - Includes R2050 Thermal Imager for FREE

" data-description="Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments. Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters. This value added kit includes the REED R2050 Thermal Imager for FREE.">