Fluke 754 Process Calibrator Kit - Includes FREE Products with Purchase

Model: 754-KIT

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments. Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters. This value added kit includes the REED R2002 IR Thermometer, REED R5010 Multimeter, REED BS-150 Borescope, and Fluke 1AC-A1-II Voltage Detector for FREE.

Add In House NIST Traceable Calibration to your 754

Clear selected options


$6,999.99 USD

Free Product Value $526.99

1 in Stock




 

Fluke 754-KIT Offers

Purchase a Fluke 754 Process Calibrator and receive FREE: a REED R2002 IR Thermometer, a REED R5010 Multimeter, a REED BS-150 Borescope, and a Fluke 1AC-A1-II Voltalert Voltage Detector.

Fluke 754 Temperature Calibrator

The 754 supports HART protocol commands version 5.7. It supports a substantial set of HART instructions including universal commands, common practice commands, and some device specific commands.

  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results.
  • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
  • Three year warranty
  • Bright white dual display. Read both sourced and measured parameters simultaneously.
  • Multi lingual interface
  • Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
  • Delivered with DPC/Track Sample software.
  • Compatible with many Asset Management software packages.

REED R2002 IR Thermometer

  • Temperature Range: -58 to 932°F (-50 to 500°C)
  • Built-in laser pointer identifies target area
  • 8: 1 spot Dimensions ratio
  • User selectable °F or °C
  • Includes: Battery and Case

REED R5010 Multimeter with Temperature

Takes True RMS AC/DC voltage and current measurements.

  • 40,000-count resolution
  • Measures frequency, capacitance and temperature
  • Diode check and continuity test
  • Backlit LCD readout with analog bar graph
  • 1000V input protection on all ranges
  • 4-20 mA process loop measurements with % readout
  • Data hold, Max/Min recording mode
  • Peak capture mode
  • UL approved
  • IP67 dust and waterproof
  • EN61010-1 Cat. IV 600V, Cat. III 1000V

REED BS-150 Borescope

Comfortable pistol grip design and forward facing controls make it easy to detect and diagnose the unreachable.

  • High visibility 3.2" colour TFT LCD monitor with 320x240 pixel resolution
  • Includes: Video borescope, imager head, magnet, hook and mirror attachments, 3.7V lithium battery, DC power supply, USB cable, video output cable, user manual and hard carrying case.
  • Viewing Distance: 15 to 25 cm (5.9 to 9.8")

Fluke 1AC-A1-II Voltage Detector

Voltbeat™ technology and continuous self-test so you always know it's working.

  • Upon detection of voltage, tip glows and beeper sounds
  • CAT IV 1000V for added protection
  • Expanded range: 90 V to 1000V AC

Fluke 754 Specifications

Range and 1 Year Accuracy
DC Voltage Measurement 100.00mV: 0.02% + 0.005mV
3.00000V: 0.02% + 0.00005V
30.0000V: 0.02% + 0.0005V
300.00V: 0.05% + 0.05V
AC Voltage Measurement 3.000V: 0.5% + 0.002V
30.00V: 0.5% + 0.02V
300.0V: 0.5% + 0.2V
DC Current Measurement 30.000mA: 0.01% + 5uA
110.00mA: 0.01% + 20uA
Resistance Measurement 10.000Ω: 0.05% + 50mΩ
100.00Ω: 0.05% + 50mΩ
1.0000kΩ: 0.05% + 0.5Ω
10.000kΩ: 0.1% + 10Ω
Frequency Measurement 1.00Hz to 110.00Hz: 0.05Hz
110.1Hz to 1100.0Hz: 0.5Hz
1.101kHz to 11.000kHz: 0.005kHz
11.01kHz to 50.00kHz: 0.05 kHz
DC Voltage Output 100.000mV:  0.015% + 0.005mV
1.00000V: 0.015% + 0.0005V
15.0000V: 0.015% + 0.0005V
DC Current Output 22.000mA: 0.01% + 0.003mA
Current sint (simulate transmitter): 0.01% + 0.007mA
Resistance Sourcing 10.000Ω: 0.01% + 10mΩ
100.00Ω: 0.01% + 20mΩ
1.0000kΩ: 0.02% + 0.2Ω
10.000kΩ: 0.02% + 3Ω
Frequency Sourcing Sinewave: 0.1Hz to 10.99Hz: 0.01 Hz
Squarewave: 0.01Hz to 10.99Hz: 0.01Hz
Sine and square 11.00Hz to 109.99Hz: 0.1Hz
Sine and square 110.0Hz to 1099.9Hz: 0.1Hz
Sine and square 1.100kHz to 21.999kHz: 0.002kHz
Sine and square 22.000kHz to 50.000kHz: 0.005kHz
Click here for complete specifications on the Fluke 754-KIT

This Fluke 754 Process Calibrator Kit Includes


Fluke 724 Temperature Calibrator

Fluke 754 Handheld Multi-Function Process Calibrators with HART Calibration

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments. Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters.


REED R2002 Infrared Thermometer

REED R2002 Infrared Thermometer

The Infrared Thermometer features a built-in laser pointer that assists in identifying the target area and thus provides a quick and precise technique for measuring surface temperatures without contact.


REED R5010 True RMS AC/DC Multimeter & Temperature

REED R5010 True RMS AC/DC Multimeter & Temperature

This multimeter is UL approved, has a 40,000 count display for precise numbers in the field.


REED BS-150 Video Borescope

REED BS-150 Video Borescope

This Video Boroscope features a viewing distance of 15 to 25cm (5.9 to 9.8") and 10° adjustable lighting.


Fluke 1AC-A1-II AC Voltage Detector

Fluke 1AC-A1-II AC Voltage Detector

Continually tests its battery and circuit integrity with a periodic double flash visual indication. A Category IV - 1000V over voltage rated product for added user protection, the highest rated of its kind.

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 754 Process Calibrator Kit - Includes FREE Products with Purchase.


Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22 1373
Type K Immersion Temperature Probe designed with a superior gripping surface made from thermoplastic rubber.
$99.99 USD

Learn More

Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25 1375
K-Type, Piercing Temperature Probe, SureGrip.
$107.99 USD

was$119.99


Learn More



Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24 1374
K-Type, Air and Gas Temperature Probe.
$107.99 USD

was$119.99


Learn More

Fluke 80PK-EXT Extension Wire Kit 80PK-EXT 1383
Type K.
$59.99 USD

Learn More

$29.99 USD

Learn More

Fluke 80PK-9 General Purpose Probe 80PK-9 1382
General Purpose, Surface/Air/Gas/HVAC, Temperature Probe.
$69.99 USD

Learn More

$29.99 USD

Learn More

Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8 1381
Pipe Clamp Temperature Probe.
$161.99 USD

was$179.99


Learn More


Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27 1377
K-Type, Industrial Surface Temperature Probe.
$296.99 USD

was$329.99


Learn More

Fluke 80PK-1 Bead Probe 80PK-1 1372
K-Type General Purpose Thermocouple Bead Temperature Probe.
$34.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

Fluke AC280 SureGrip Hook Clips AC280 1401
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$34.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More



Fluke TL950 Mini-Pincer Test Lead Set TL950 2028
30V RMS or 60V DC, and 15A.
$44.99 USD

Learn More

Fluke TL940 Mini-Hook Test Lead Set TL940 2027
30V RMS or 60V DC, and 15A.
$24.99 USD

Learn More

Fluke 750SW Dpc/Track2 750SW 11677
The 753, 754 and 743,744 work with the Fluke DPC/TRACK2 software to create procedures, instructions, and action lists to deliver fast, easy documentation.
$3,499.99 USD

Learn More


$449.99 USD

was$499.99


Learn More

Fluke 700PRV-1 Pressure Relief Valve Kit 700PRV-1 1326
To be used with Fluke 700HTP-1 Hydraulic Test Pump.
$629.99 USD

was$699.99


Learn More

Fluke 700HTP-2 Hydraulic Test Pump 700HTP-2 11184
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31.
$1,099.95 USD

Learn More

$539.99 USD

was$599.99


Learn More

$359.99 USD

was$399.99


Learn More

Fluke C781 Meter Case C781 1452
Zippered with detachable pouch.
$69.99 USD

Learn More

$79.99 USD

Learn More

Fluke C700 Hard Carrying Case C700 1448
For use with the Fluke 700 Series.
$224.99 USD

was$249.99


Learn More


Ask a question about the Fluke 754 Process Calibrator Kit - Includes FREE Products with Purchase:

comments powered by Disqus

Review the Fluke 754 Process Calibrator Kit - Includes FREE Products with Purchase

" data-description="Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments. Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters. This value added kit includes the REED R2002 IR Thermometer, REED R5010 Multimeter, REED BS-150 Borescope, and Fluke 1AC-A1-II Voltage Detector for FREE.">