Model: FP-PLUS

Food Safety Thermometer.

Sorry! This product has been discontinued.

The Fluke FP-PLUS has been discontinued, and does not currently have a replacement. If you would like a recommendation please call us at 1.877.766.5412


Fluke FP-PLUS Offers

The Fluke FoodPro Plus is a combination infrared surface temperature scanner and probe thermometer with an integrated count down timer to monitor line checks and cooking and cooling intervals.


  • Quickly scan temperatures without risk of cross-contamination
  • Verify internal temperatures with flip down, field replaceable, thin-film RTD (Resistant Thermal Device) platinum tipped probe
  • Set adjustable alarms with integrated countdown timer (adjustable from 10 seconds to 7 hours, 59 minutes)
  • Dual-reading display shows the highest scanned temperature alongside the current reading
  • Easy to-see illumination light shows the temperature measurement spot and removes the targeting guesswork
  • HACCP Check "Go/No-Go" lights show immediately if temperatures are within HACCP guidelines for safe hot or cold food holding (A green light indicates safe hot and cold holding temperatures, while potentially dangerous food temperatures trigger a red light)
  • Sealed to IP54 standards for long life expectancy and accuracy


  • IR Temperature Range: -40 to 200°C (-40 to 390°F);
  • Accuracy: 0 to 65°C (32 to 150°F): ±1°C (±2°F); / <0°C (32°F): ±1°C (±2°F) ±0.1°; / >65°C (150°F): ±1.5% rdg.
  • Response Time: <500ms after initial reading
  • Spectral Response: 8-14 µm
  • Emissivity: Pre-set for food service applications
  • Optical Resolution: 2.5: 1 (Distance to Spot size)
  • Working Distance: 25 to 250mm (1 to 10")
  • Min. Target Size: 12mm (0.5") Ø

Probe Specifications

  • RTD Temperature Range: -40 to 200°C (-40 to 390°F);
  • Accuracy: -5 to 65°C (23 to 150°F): ±0.5°C / (±1°F); <-5°C (23°F): ±1°C (±2°F); / >65°C (150°F): ±1% rdg.
  • Response Time: 7-8 seconds

General Specifications

  • Power Supply: 1 9V alkaline battery
  • Battery Life: 10 hours minimum
  • Probe Dimensions: 3.0mm (0.118") dia.; 80mm (3.0") L
  • Dimensions (H x W x D): 165 x 32 x 50mm (6.5 x 1.25 x 2")
  • Weight: 150 g (0.33 lb.)

Ask a question about the Fluke FP-PLUS:

comments powered by Disqus

Review the Fluke Corporation FP-PLUS

" data-description="Food Safety Thermometer.">