Fluke 374 True-RMS Clamp Meter, 600A AC/DC

Model: 374

True RMS, 600A AC/DC, 600V AC, Continuity, MIN/MAX/AVG. Works with iFlex flexible current probes.

Sorry! This product has been discontinued.


The Fluke 374 True-RMS Clamp Meter, 600A AC/DC has been discontinued, it has been replaced by the Fluke 374 FC True-RMS AC/DC Clamp Meter



 

Fluke 374 Clamp Meter Key Features:

  • iFlex flexible current probe (sold separately) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
  • CAT IV 600 V, CAT III 1000 V
  • Propietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing personal protective equipment
  • Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
  • Three-year warranty
  • Soft carrying case

The Fluke 374 True-RMS Clamp Meter

The Fluke 374 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 374 can read up to 600 V and 600 A in both ac and dc modes with the fixed jaw.
Additionally, the Fluke 374 is compatible with the new iFlex™ flexible current probe (sold separately) which expands the measurement range to 2500 A ac and provides increased display flexibility, ability to measure around awkward sized conductors and improved wire access.

Fluke 374 Measurement Capability:

  • 600 A ac and dc current measurement with fixed jaw
  • 2500 A ac current measurement with iFlex™ flexible current probe (sold separately)
  • 600 V ac and dc voltage measurement
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • Resistance measurement to 6000 Ω with continuity detection
  • Min, max, average and inrush recording to capture variations automatically
  • 1000 µF capacitance measurement

Key Features of the Fluke 374:

  • iFlex™ flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
  • CAT IV 600V, CAT III 1000 V safety rating
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing personal protective equipment
  • Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to changeswitch positions while taking a measurement
  • Three-year warranty

Optional use with the 18" Flexible Current Probe

The Fluke 374 can be used with the Fluke iFlex i2500-18flexible current probe which expands the measurement range to 2500 A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

The Fluke 374 is part of Fluke's new Clamp Meter line that includes: 381, 376, 375, 373 & 365.
Replacing the Fluke 336
The Fluke 374 clamp meter is the direct replacement for the Fluke 336 clamp meter. The Fluke 374 includes all the features of the 336, but also includes:

  • CAT IV 600, CAT III 1000 V
  • optional iFlex 2500 A AC
  • 1000 μF
  • Min/Max/Avg

Compare the newest Fluke Clamp Meter Models:

Note: The Fluke 375 clamp meter is the direct replacement for the Fluke 336 clamp meter.

Fluke-365 Fluke-373 Fluke-374 Fluke-375 Fluke-376 Fluke-381
Measure ac current 200.0 A 600.0 A 600.0 A 600.0 A 999.9 A 999.9 A
Measure ac current via iFlex 2500 A 2500 A 2500 A 2500 A
Measure ac voltage 600.0 V 600.0 V 600.0 V 600.0 V 1000.0 V 1000.0 V
Measure continuity ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω
Measure dc current 200.0 A 600.0 A 600.0 A 999.9 A 999.9 A
Measure dc voltage 600.0 V 600.0 V 600.0 V 1000.0 V 1000.0 V
Measure resistance 6,000 Ω 6,000 Ω 6,000 Ω 60k Ω 60k Ω 60k Ω
Measure frequency 500 Hz 500 Hz 500 Hz
Measure inrush 100 mS 100 mS 100 mS 100 mS
Work in poorly lit areas Backlight Backlight Backlight Backlight Backlight Backlight
Measure non-linear loads True-rms True-rms True-rms True-rms True-rms True-rms
Fluke 374 Clamp Meter Specifications
Diameter of measurable conductor01.3" or 34 mm max
Operating temperature-14 to 122°F (-10 to 50°C)
Storage Temperature-40 to 140°F (-40 to 60°C)
Operating Humidity< 90% @ 10 to 30°C, < 75% @ 30 to 40°C
Operating Altitude0 to 3000 m
Size246 x 83 x 43 mm, (9.685 x 3.267 x 1.692 in.)
Weight388g, (14 oz.)
Temperature Coefficient0.01% °C
(<18°C or > 28°C)
WarrantyThree years for electronics
One year for cable and clamp assembly
Click here for complete specifications on the Fluke 374
  • Coated instruction card
  • Safety information sheet
  • Soft carrying case
  • TL75 test leads
  • Two AA Alkaline batteries

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 374 True-RMS Clamp Meter, 600A AC/DC.

Fluke TL75 Hard Point Test Lead Set TL75 2007
Comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs.
$24.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set TP1 2040
For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$19.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

Fluke TL223 Suregrip Electrical Test Lead Set TL223 1994
includes Fluke AC220, TP1, TL224.
$79.99 USD

Learn More

Fluke AC87 Heavy Duty Bus Bar Clip Set AC87 1411
Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More

Fluke TL224 SureGrip Silicone Insulated Test Leads TL224 1995
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89 1412
Insulated, Shrouded Banana Jack. One Red.
$44.99 USD

Learn More

Fluke C33 Soft Vinyl Carrying Case C33 1439
Included with the 330 Series.
$34.99 USD

Learn More

Fluke C550 Premium Tool Bag C550 1447
Tool Bag with steel reinforced frame.
$99.99 USD

Learn More



Fluke LVD2 Volt Light LVD2 4361
Non-contact AC voltage detector and LED flashlight includes dual sensitivity turning blue 1" to 5" for the source and red at the source.
$39.99 USD

Learn More

Fluke L206 Deluxe LED Hat Light L206 1833
Three super bright white LEDs never burn out attach to hard hat, baseball cap, or panel door.
$49.99 USD

Learn More

Fluke i2500-10 iFlex Flexible 10" Current Probe i2500-10 8228
The iFlex 2500 is a 10" flexible current probe that offers a measuring capability up to 2500 A AC current and up to 1000 V AC.
$134.99 USD

was $149.99


Learn More

Fluke i2500-18 iFlex Flexible 18" Current Probe i2500-18 8229
The iFlex 2500 is an 18" flexible current probe that offers a measuring capability up to 2500 A AC current and up to 1000 V AC.
$134.99 USD

was $149.99


Learn More


Ask a question about the Fluke 374 True-RMS Clamp Meter, 600A AC/DC:

comments powered by Disqus

Review the Fluke 374 True-RMS Clamp Meter, 600A AC/DC

" data-description="True RMS, 600A AC/DC, 600V AC, Continuity, MIN/MAX/AVG. Works with iFlex flexible current probes.">