Questions? Let us help:
1.877.766.5412

Contact Us

Fluke 376 True-RMS 1000A AC/DC Clamp Meter with iFlex


Fluke 376 True-RMS 1000A AC/DC Clamp Meter with iFlex

Model: 376

Fluke 376 AC/DC Clamp Meter with backlight (TRMS, 1000AAC/DC, 1000VAC, Continuity, Frequency, MIN/MAX, mV DC) and up to 2500A AC with the included 18" iFlex flexible current probe.

Add In House NIST Traceable Calibration to your 376

Clear selected options



$359.96 USD

was $399.95

10+ in Stock


Order with confidence: 30 Day Returns on web orders and Free Shipping on orders over $299
Spend over $250 on Fluke Tools and receive free gear Fluke Connect is now available

Fluke 376 True-RMS 600A AC/DC Clamp Meter

The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 375 can read up to 600 V and 600 A in both ac and dc modes with the fixed jaw.

Additionally, the Fluke 376 is compatible with the new iFlex™ flexible current probe (sold separately) which expands the measurement range to 2500 A ac and provides increased display flexibility, ability to measure around awkward sized conductors and improved wire access.

Fluke 376 Measurement Capability:

  • 999.9 A ac and dc current measurement with fixed jaw
  • 2500 A ac current measurement with iFlex™ flexible current probe (sold separately)
  • 1000 V ac and dc voltage measurement
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • Frequency measurement to 500 Hz with both jaw and iFlex™
  • Resistance measurement to 60 kΩ with continuity detection
  • Min, max, average and inrush recording to capture variations automatically
  • 500 mV dc measurement range to interface with other accessories
  • 1000 &mini;F capacitance measurement

Key Features of the Fluke 376:

  • iFlex™ flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
  • CAT IV 600V, CAT III 1000 V safety rating
  • Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing personal protective equipment
  • Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to changeswitch positions while taking a measurement
  • Three-year warranty

The Fluke 376can be used with the Fluke iFlex i2500-18 flexible current probe which expands the measurement range to 2500 A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.


Compare the newest Fluke Clamp Meter Models:


Fluke-365 Fluke-373 Fluke-374 Fluke-375 Fluke-376 Fluke-381
Measure ac current 200.0 A 600.0 A 600.0 A 600.0 A 999.9 A 999.9 A
Measure ac current via iFlex 2500 A 2500 A 2500 A 2500 A
Measure ac voltage 600.0 V 600.0 V 600.0 V 600.0 V 1000.0 V 1000.0 V
Measure continuity ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω
Measure dc current 200.0 A 600.0 A 600.0 A 999.9 A 999.9 A
Measure dc voltage 600.0 V 600.0 V 600.0 V 1000.0 V 1000.0 V
Measure resistance 6,000 Ω 6,000 Ω 6,000 Ω 60k Ω 60k Ω 60k Ω
Measure frequency 500 Hz 500 Hz 500 Hz
Measure inrush 100 mS 100 mS 100 mS 100 mS
Work in poorly lit areas Backlight Backlight Backlight Backlight Backlight Backlight
Measure non-linear loads True-rms True-rms True-rms True-rms True-rms True-rms

Fluke 376 True-RMS Clamp Meter Features:

  • iFlex™ flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
  • CAT IV 600 V, CAT III 1000 V safety rating
  • Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environmentswhile providing stable readings
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing personal protective equipment
  • Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
  • Three-year warranty
  • Soft carrying case

Features of the iFlex Flexible Current Probe:

  • Expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access
  • CAT IV 600 V, CAT III 1000 V
  • 7.5 mm coil diameter allows measurement in tight spaces
  • Ergonomic design allows easy operation with one hand
  • 1.8 m (6 ft) cable
  • Three-year warranty
Specifications
Diameter of measurable conductor01.3" or 34 mm max
Operating temperature-14 to 122°F (-10 to 50°C)
Storage Temperature-40 to 140°F (-40 to 60°C)
Operating Humidity< 90% @ 10 to 30 °C, < 75% @ 30 to 40°C
Operating Altitude0 to 3000 m
Size246 x 83 x 43 mm, (9.685 x 3.267 x 1.692 in.)
Weight388g, (14 oz.)
Temperature Coefficient0.01% °C
(<18°C or > 28°C)
WarrantyThree years for electronics
One year for cable and clamp assembly

iFlex Specs:

Specifications
i2500-18 and i2500-10
Range
Resolution
Accuracy
AC Current*
2500 A
0.1 A
3% ± 5 digits**
Frequency*500 Hz
0.1 Hz
0.5% ± 5 digits
External magnetic
field rejection

(with cable >10 cm from the coupling)

40 dB
Inrush*Yes
Safety rating
CAT III 1000 V, CAT IV 600 V
*When used with compatible Fluke meter. Accuracy stated includes probe and meter accuracy.
** For position accuracy at non-optimum positions, see Position sensitivity specifications table "A"

Position Sensitivity Specifications
Distance from Optimum
i2500-10
i2500-18
Additional iFlex error
A0.5 in (12.7 mm)
1.4 in (35.6 mm)td>
± 0.5%
B0.8 in (20.3 mm)
2.0 in (50.8 mm) ± 1.0%
C1.4 in (35.6 mm)
2.5 in (63.5 mm) ± 2.0%

  • 18-inch iFlex flexible current probe - i2500-18
  • TL75 test leads
  • Coated instruction card
  • Safety information sheet
  • Soft carrying case
  • Two AA Alkaline batteries

Popular Accessories

Click on a category to view a selection of the most popular accessories compatible with the Fluke 376 True-RMS 1000A AC/DC Clamp Meter with iFlex.

Fluke AC220 SureGrip Alligator Clips AC220 1400
Fluke AC220 SureGrip Alligator Clips designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves
$39.95 USD


Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters
$22.45 USD


Fluke AC87 Heavy Duty Bus Bar Clip Set AC87 1411
Fluke AC87 Bus Bar Heavy Duty Clips , Insulated, Shrouded Banana Jacks, Pair Black/Red
$39.95 USD


Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89 1412
Fluke AC89 Insulation Piercing Test Clip , Insulated, Shrouded Banana Jack, Red
$39.95 USD


Fluke TL223 Suregrip Electrical Test Lead Set TL223 1994
Fluke TL223 Suregrip Electrical Test Lead Set includes Fluke AC220, TP1, TL224
$74.95 USD


Fluke TL224 SureGrip Silicone Insulated Test Leads TL224 1995
Fluke TL224 SureGrip Silicone Insulated Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves
$24.95 USD


Fluke TL75 Hard Point Test Lead Set TL75 2007
Fluke TL75 Hard Point Test Lead Set comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs
$22.45 USD


Fluke TP1 Slim Reach Test Probe Set TP1 2040
Fluke TP1 Slim Reach Test Probe Set for probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$17.45 USD


Fluke C33 Soft Vinyl Carrying Case C33 1439
Fluke C33 Soft Vinyl Carrying Case (INCLUDED WITH 330 SERIES)
$29.95 USD


Fluke C550 Premium Tool Bag C550 1447
Fluke C550 Premium Tool Bag with steel reinforced frame.
$94.95 USD


Fluke H3 Clamp Meter Holster H3 1806
Fluke H3 Clamp Meter Holster
$32.45 USD


Fluke C1600 Meter and Accessories Gear Box C1600 3705
Fluke C1600 Meter and Accessories Gear Box.
$64.95 USD


Fluke L206 Deluxe LED Hat Light L206 1833
Fluke L206 Deluxe LED Hat Light (three super bright white LEDs never burn out attach to hard hat; baseball cap or panel door)
$44.95 USD


Fluke LVD1 Volt Light LVD1 1843
Fluke LVD1 Volt Light - handy Fluke Volt Light compact LED flash-lights with built-in color responsive AC non-contact voltage detector.
$24.95 USD


Fluke LVD2 Volt Light LVD2 4361
Fluke LVD2 Volt Light - Non-contact AC voltage detector and LED flashlight includes dual sensitivity turning blue 1" to 5" for the source and red at the source
$39.95 USD


Fluke i2500-10 iFlex Flexible 10" Current Probe i2500-10 8228
The iFlex 2500 is a 10" flexible current probe that offers a measuring capability up to 2500 A AC current and up to 1000 V AC.
$139.95 USD


Fluke i2500-18 iFlex Flexible 18" Current Probe i2500-18 8229
The iFlex 2500 is an 18" flexible current probe that offers a measuring capability up to 2500 A AC/DC current and up to 1000 V AC.
$139.95 USD


Calibration Certification CERTICM1 CERTICM1 16425
Our Lab Certifications include full Data and Uncertainties
$70.00 USD


View All Accessories

Ask a question about the Fluke 376 True-RMS 1000A AC/DC Clamp Meter with iFlex:

comments powered by Disqus

Fluke 376 True-RMS 1000A AC/DC Clamp Meter with iFlex Reviews:

Adam81 - Thursday, June 28th 2012

Fluke does it again!

I bought this meter to replace a klein ac/dc amp meter. I should of bought a fluke to begin with. It is of the highest quality and is user friendly. Don't be fooled or try to buy something that is "as good."" BUY A FLUKE AND NOTHING ELSE"

Recommendation: Yes, I would recommend this product.


Thomas - Sunday, June 17th 2012

Great

I had a 337 before this clamp and having the iflex is a great feature. I really enjoy using this meter.

Recommendation: Yes, I would recommend this product.


Arcmech - Thursday, June 14th 2012

Great meter

For getting in to tight gear. It's great rugged back light is nice and bright. Soft case is awesome all fluke tools should come with this type of case. Inrush and microfarad measurements are great pluses could be even better if it had capability of multiple current cables simultaneously witha realitvly close price range. It's my second favorite meter. Fluke 179 is fav.

Recommendation: Yes, I would recommend this product.


Scott0302 - Friday, June 8th 2012

This meter has more uses than a standard clamp meter

I found it a hassle to measure high current on multiple conductors on one line which is why I purchased the 376 meter. I am extremely happy with its operation. I now have a quality meter that covers all the current ranges and voltage types I work with.

Recommendation: Yes, I would recommend this product.


toolguy - Thursday, June 7th 2012

Great Product

This is a great tool. The flex Ct is cats meow for any tight switch gear or panels that you need to get into. The meter is rugged and stands up to everyday abuse. I would recommend it to anyone.

Recommendation: Yes, I would recommend this product.