Questions? Let us help:
1.877.766.5412

Contact Us

Fluke 233 Multimeter with Wireless Remote Display


Fluke 233 Multimeter with Wireless Remote Display

Model: 233

The Fluke 233 is a TrueRMS digital multimeter with removable wireless magnetic display that allows you to be 30ft away from the measurement point. Perfect for those difficult measurements where display viewing is challenging.

Add In House NIST Traceable Calibration to your 233

Clear selected options



$275.36 USD

was $305.95

6 in Stock


Order with confidence: 30 Day Returns on web orders and Free Shipping on orders over $299
Black Friday / Holiday 2014 Sale on now. Save on Fluke tools and load up with free gear Spend over $250 on Fluke Tools and receive free gear

The NEW Fluke 233 True-rms Remote Display Digital Multimeter gives you ultimate flexibility in unusual measurement scenarios. Place the removable display where you can see it and then put the meter where it is convenient for you-no more juggling of leads and the meter while stretching into a tight spot. You can now take measurements in hard-to-reach places, where machines or panels are physically separated from a limit or isolator switch, or in user prohibited areas such as clean rooms or hazardous areas.

Imagine the possibilities! What would you do if you could be in two places at once?
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • Measure up to 1000 V ac and dc
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 50 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
  • The removable magnetic display can be conveniently mounted where it is easily seen
  • Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
  • Use as a conventional multimeter when the display is connected
  • Radio transmitter automatically turns off when the display is connected to the meter
  • Auto power off maximizes battery life
  • Min/Max and Average recording to capture variations automatically
  • Test continuity and diodes
  • Easy to read display with large digits and bright backlight
  • Battery life approximately 400 hours
Accuracy specifications
DC voltage Range 0.1 mV to 1000 V
Accuracy 0.25 % + 2
AC voltage Range 0.1 mV to 1000 V
Accuracy 1.0 % + 3
DC current Range 1 mA to 10 A
Accuracy 1.0 % + 3
AC current Range 1 mA to 10 A
Accuracy 1.5 % + 3
Resistance Range 0.1 Ω to 40 MΩ
Counts 6000
Capacitance Range 1 nF to 9999 µF
Resolution 1nF
Frequency Range 5 Hz to 50 kHz
Resolution 0.01Hz
Temperature -40 °C to +400 °C
Power AA batteries: Three for main body; two for display
Battery life 400 hours
Wireless frequency 2.4 GHz ISM Band 10 meter range
Safety rating CAT IV 600 V , CAT III 1000 V
General specifications
Basic features AC true-rms Yes
Ranging Auto/Manual
Display Backlight Yes
Data storage Min/Max/Avg Yes
Other features Battery type AA alkaline
Removable display Yes
Warranty and protection Safety rating CAT IV 600 V/CAT III 1000 V
External protection Rubber overmold
Warranty Three-years
Size (HxWxL) 5.3 cm x 9.3 cm x 19.3 cm (2.08 in x 3.6 in x 7.6 in)
Weight 604 g (1.3 Ib)

Popular Accessories

Click on a category to view a selection of the most popular accessories compatible with the Fluke 233 Multimeter with Wireless Remote Display.

Fluke 80PK-1 Bead Probe 80PK-1 1372
Fluke 80PK-1 (K-Type) - General Purpose Thermocouple Bead Temperature Probe
$31.15 USD


Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27 1377
Fluke 80PK-27 K-Type, Industrial Surface Temperature Probe
$280.76 USD

was $311.95



Fluke 80PK-3A Surface Probe 80PK-3A 1378
Fluke 80PK-3A K-Type, Flat Surface Temperature Probe
$140.36 USD

was $155.95



Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8 1381
Fluke 80PK-8 K-Type, Pipe Clamp Temperature Probe
$159.08 USD

was $176.75



Fluke 80PK-9 General Purpose Probe 80PK-9 1382
Fluke 80PK-9 K-Type, General Purpose, Surface/Air/Gas/ HVAC, Temperature Probe
$62.35 USD


Fluke 80PK-EXT Extension Wire Kit 80PK-EXT 1383
Fluke 80PK-EXT Extension Wire Kit, Type K
$57.15 USD


$233.96 USD

was $259.95



$131.00 USD

was $145.55



Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters
$23.35 USD


Fluke TL220 Suregrip Industrial Test Lead Set TL220 1990
Fluke TL220 Suregrip Industrial Test Lead Set includes Fluke AC220, Fluke TP220 and Fluke TL222
$77.95 USD


Fluke TL223 Suregrip Electrical Test Lead Set TL223 1994
Fluke TL223 Suregrip Electrical Test Lead Set includes Fluke AC220, TP1, TL224
$77.95 USD


Fluke TL71 Premum DMM Test Lead Set TL71 2005
Fluke TL71 Premium DMM Test Lead Set comfort grip probes with silicone insulated, right-angle test leads
$25.95 USD


Fluke i200s AC Current Clamp I200S 1555
200A AC current clamp with BNC terminated lead
$204.48 USD

was $227.20



Fluke i3000s AC Current Clamp I3000S 1556
3000A AC current clamp with BNC terminated lead
$545.36 USD

was $605.95



Fluke i1010 AC/DC Current Clamp I1010 1821
Fluke i1010 AC/DC Current Clamp for use with Digital Multimeters and Calibrators (Current Range: 1 A - 600 A, AC; 1 A - 1000 A, DC)
$363.56 USD

was $403.95



Fluke i2000 FLEX Flexible AC Current Probe I2000-FLEX 1823
2000A flexible AC current transformer for Fluke power quality analyzers
$340.83 USD

was $378.70



Fluke i410 AC/DC Current Clamp I410 1826
Fluke i410 AC/DC Current Clamp 1 to 400 Amps DC / 1 to 400 Amps AC for use with digital multimeters, scopemeters and power quality analyzers.
$227.21 USD

was $252.45



Fluke TPAK (ToolPak) Meter Hanging Kit TPAK 2060
Fluke TPAK (ToolPak) Meter Hanging Kit
$43.95 USD


Fluke C116 Soft Carrying Case C116 4581
Fluke C116 Soft Carrying Case
$36.35 USD


Fluke C35 Soft Carrying Case C35 4617
Fluke C35 soft carry case for use with Fluke multimeters
$23.35 USD


Fluke C280 Soft Case C280 5966
Fluke C280 Soft Case for the Fluke 287 and 289 DMMs.
$36.35 USD


Fluke C550 Premium Tool Bag C550 1447
Fluke C550 Premium Tool Bag with steel reinforced frame.
$88.88 USD

was $98.75



View All Accessories

Ask a question about the Fluke 233 Multimeter with Wireless Remote Display:

comments powered by Disqus


Fluke 233 Multimeter with Wireless Remote Display Reviews:

legacybg5 - Tuesday, September 11th 2012

Good all around meter

I would like to see a fix for the battery problem and make the fix avable to people that allredy own it.It is a great meter for a first time user. I down graded from a Fluke 88 and now I am going to buy another Fluke 88.I do use it almost every day at a auto dealer. It cover most bases for me.

Recommendation: Yes, I would recommend this product.


John316 - Monday, August 20th 2012

Needs more R&D

Great DMM--when it works. This meter eats batteries like crazy; definately a design flaw that will need to be addressed. Would give 5-stars if it wasn't so battery hungry.

Recommendation: Yes, I would recommend this product.


Tom96 - Friday, August 3rd 2012

Kills batteries

Every time I pick it up I have to put 5 new batteries in it. I wish Fluke would redesign it and recall mine. It is not handy at all.

Recommendation: No, I would not recommend this product.


wainiaw - Wednesday, July 11th 2012

Most useful meter I've used!

This is a great idea! No more looking for someone else to hold or read the meter. The magnet on the remote puts the remote where you need it to be. The only problem I have with this meter is the battery life. I used the meter for only two weeks and the batteries died, so I put in new batteries and used the meter for about a half an hour more. I didn't use the meter for about a month after that and when I went to use it again, it was dead. When the batteries do start to go, you don't have much time before the meter stops working alltogether. Fix this problem ( 9Vs maybe?) and this would be my #1 meter!

Recommendation: Yes, I would recommend this product.


Steve - Monday, July 2nd 2012

Where have you been all my life

This DMM is great! I can now watch my equipment controls operate while I change the state at the controller. No more selecting an ouput and walking around to check the proper state. Perfect thank you Fluke!

Recommendation: Yes, I would recommend this product.


BradleyJB - Sunday, June 24th 2012

Great for construction equipment.

The remote face make working on large construction equipment much easier than having someone help you the whole time. The magnet is a huge help when you don't have enough hands.

Recommendation: Yes, I would recommend this product.


Jeremy - Tuesday, June 12th 2012

Awesome

i love the removable display it helps in so many ways makes life alot easier as a maintenance tech

Recommendation: Yes, I would recommend this product.


wedge - Monday, June 11th 2012

Have to gloat about remote!

I was recently troubleshooting an problematic SCR which controlled a heater zone within an extruder barrel .I connected the Fluke 233 to the line side of the SCR at the main control panel, removed the remote display, connected my Fluke 289 to the field barrel heater terminals, energized the load, and was able to see in real time the problem that was occuring. Without the Fluke 233 I would have needed 20ft+ leads.The 233 is a must have!

Recommendation: Yes, I would recommend this product.


aggie - Saturday, June 9th 2012

Best meter I ever bought.

I use this meter almost every day. I love how it's auto ranging. Very easy to read numbers on the gauge and on the meter.

Recommendation: Yes, I would recommend this product.


JonZ - Friday, June 8th 2012

This meter works great

This meter is great because you can do the work of two people by taking the display where you can see it.

Recommendation: Yes, I would recommend this product.


rootriverbrewer - Friday, June 8th 2012

Awsome meter

I recieved this meter a a gift from fluke in 2011, and it is the best meter I have ever used. The remote display is ideal for trubble shooting any thing from motor controls to a bad three way switch situation. I purchaced the magnetic stap for it as well. This makes it completely hands free.

Recommendation: Yes, I would recommend this product.


100percentmechanic - Thursday, June 7th 2012

love the remote display!!!!!

I have had this meter since last spring and i love the remote display which is magnetic also. I can do things others cant without long lead extensions and such. Does everything i ask it to do and more. The only gripe i have is that it consumes battery life quickly, especially if utilizing the remote feature and requires 5 AA batteries so keep some close by or you are dead in the water!!! Has had batteries changed 4 times in the first year under moderate usage. A little more efficiency would be appreciated with this meter but that's just my opinion.

Recommendation: Yes, I would recommend this product.


Sean - Thursday, June 7th 2012

Best meter ever!!

Best meter I've ever used...all of my coworkers that have seen it in action have gone on to purchase...it is really like having a helper with you probing a circuit that is unseen from your vantage point ...excellent product!

Recommendation: Yes, I would recommend this product.


Jim77 - Thursday, June 7th 2012

very handy remote display

meter very handy to use if your measurements are located at a distance from where your are actuating a signal. For example; I work on CNC controls and the signal is located 20-30 feet from the control pendent . When I make a signal at the control panel, I can see the results and measurements can be made without long test leads I used to use.This meter, however, needs a shutoff switch for the display as it quickly extingushes batteries at 3X the rate my old meter did (Fluke 87). Also you need to replace with 5 AA cells instead of the normal 9-volt cell my old meter used.

Recommendation: Yes, I would recommend this product.


kas843 - Thursday, June 7th 2012

Awesome product

Nothing compares to the convenience of this multi-meter when working independently. No more turn the key while I watch the meter struggle. Has everything needed to be an all around great tool in the auto, marine, aviation and recreational repair industry. I purchased in the 233A kit and has more beneficial features than any other brands offer; very strong magnetic strap, great test leads, etc. You just cannot beat the quality with any other brand

Recommendation: Yes, I would recommend this product.


BETO - Wednesday, June 6th 2012

fluke 233

i been using this metet(fluke 233 remote display multimeter),for at least 3 weeks.i dont actually own one.i been using my employers.but i can see why everyone wants one.I KNOW I DO.I HAVE USED IT IN EXCESS OF 35 FEET AND THE READING WAS STILL ACCURATE.I LOVE THIS TOOL.I AM PLAN TO BUT ONE WITHINH THE 2 MONTHS.I OWN OTHER FLUKE TOOLS (EVEN FLUKE NETWORKS)BUT THE FLUKE 233 IS ON MY WISHLISTI STRONLY RECOMMEND THIS PRODUCT

Recommendation: Yes, I would recommend this product.


Turfco - Thursday, May 31st 2012

The remote display saves me lots of time

Being able to remove the display and take it away from the point of measurement is terrific.

Recommendation: Yes, I would recommend this product.