Fluke 772 Milliamp Process Clamp Meter

Model: 772

Measures 4-20mA signals without breaking the loop. Also measures and sources & simulates process signals in-line with 24VDC loop power.

Add In House NIST Traceable Calibration to your 772

Clear selected options


$809.99 USD

was $899.99

2 in Stock




 

Fluke 772 Offers

Features

  • Source 4 to 20mA signals for testing control system I/O or I/Ps
  • mA output linear ramp or 25% step output
  • Automatically change the 4 to 20mA output for remote testing
  • Best in class 0.2 % accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without "breaking the loop"
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50mA signals in older control systems using the 99.9 mA range
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements mA measure, jaw mA measure, in circuit Loop power mA source

Fluke 772 Specifications

Diameter of Measurable Conductor 0.177" or 4.5mm max
mA Measurement (Measured by clamp)
Resolution and Range 0 to 20.99mA
Accuracy 0.2% + 2 counts
Resolution and Range 21.0 to 100.0mA
Accuracy 1% + 5 counts
mA Measurement (Measured in series with test jacks)
Resolution and Range 0 to 24.00mA
Accuracy 0.2% + 2 counts
mA Source (Maximum mA Drive: 24 mA into 1,000 ohms)
Resolution and Range 0 to 24.00mA
Accuracy 0.2% + 2 counts
mA Simulate (Maximum voltage 50V DC)
Resolution and Range 0 to 24.00mA
Accuracy 0.2% + 2 counts
Click here for complete specifications on the Fluke 772

What's included with the Fluke 772

  • 772 Milliamp Process Clamp Meter
  • Four AA alkaline batteries (installed)
  • Soft carrying case
  • TL75 test leads
  • AC 72 detachable clip
  • TL 940 mini hook test leads
  • Hanging tool with hook and loop strap
  • Instruction sheet

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 772 Milliamp Process Clamp Meter.

Fluke C550 Premium Tool Bag C550 1447
Tool Bag with steel reinforced frame.
$99.99 USD

Learn More

Fluke TL220 Suregrip Industrial Test Lead Set TL220 1990
Includes Fluke AC220, Fluke TP220, and Fluke TL224.
$79.99 USD

Learn More

Fluke TLK291 fused test probe set TLK291 4630
For use with Fluke multimeters and test leads.
$79.99 USD

Learn More


Ask a question about the Fluke 772 Milliamp Process Clamp Meter:

comments powered by Disqus

Review the Fluke 772 Milliamp Process Clamp Meter

" data-description="Measures 4-20mA signals without breaking the loop. Also measures and sources & simulates process signals in-line with 24VDC loop power.">