The Fluke i6000s Flex is an AC current probe utilizing the Rogowski
principle. It can be used to measure currents up to 6000A when used in
conjunction with oscilloscopes, recorders or data loggers. The flexible
and lightweight measuring head allows quick and easy installation in
hard to reach areas.
| Electrical Characteristics |
| Current Ranges |
|
60 A / 600 A / 6000 A ACRMS |
|
| Output Sensitivity (AC coupled) | |
| Load Impedance | |
| Accuracy (at +25°C) |
|
±1% of range (45 – 65 Hz) |
|
| Linearity (10% to 100% of range) | |
| Noise |
|
8mV ACRMS (60 A) |
|
2 mV ACRMS (600/6000A) |
|
| Frequency Range | |
| Phase Error |
|
< ±1º (45 – 65Hz), |
|
±10º (at 20 kHz) |
|
| Position Sensitivity (with cable > 25mm from the coupling) | |
| External field (with cable > 200mm from the head) | |
| Power Supply |
|
2 x AA MN 1500 LR6 alkaline |
|
400 Hours, low battery indicator or dedicated ext power supply |
|
| Temperature Coefficient | |
| Working Voltage (see Safety Standards section) | |
| General Characteristics |
| Head Cable length…(double insulated) |
|
610mm (24”) I6000s Flex-24
915mm (36”) I6000s Flex-36 |
|
| Head Cable Diameter | |
| Head Bend Radius | |
| Cable length (head to electronics) | |
| Output Connection |
|
0.5 m cable terminated with
safety BNC connector
Supplied with 4mm safety plug
adaptor |
|
| Operating Temperature Range |
|
-20 to +90 °C (head)
-20 to +85 °C (electronics) |
|
| Storage Temperature Range |
|
-40 to +105 °C (head)
-20 to +85 °C (electronics) |
|
| Operating Humidity |
|
15% to 85% (non condensing) |
|
| Weight |
|
180 g (head), 190 g (electronics) |
|
| Safety Standards |
| BS EN 61010 | |
| BS EN 61010 | |
| BS EN 61010 | |
| 600VRMS, Category III, Pollution Degree 2 | |
| Note |
|
Use of the probe on uninsulated conductors is limited to 600 V ACRMS or DC and frequencies
below 1 kHz.
|
|
| EMC Standards |
| BS EN 61326: |
1998 +A1, A2, & A3 | |
No user reviews available.
USD (change) 
