Fluke 718-1G Pressure Calibrator

Model: 718-1G

Pressure Calibrator -1 to 1 PSI, (-68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa).

Add In House NIST Traceable Calibration to your 718-1G

Clear selected options

$2,499.99 USD

6 to 7 Weeks


  • Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
  • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
  • Error % calculation for quicker pass/fail decision making in the field
  • Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage
  • Min/Max/Hold to capture changing measurements
  • Switch test feature for quicker and more accurate pressure switch testing
  • Built-in pressure / vacuum hand pump, with vernier and bleed valve
  • New switch test function captures set, reset and dead band.
  • Pressure measurement to 0.05% of full span, using an internal pressure sensor
  • Pressure measurement to 10,000 PSI, 700 bar using any of the Fluke-700Pxx Pressure Modules
  • Current measurement with 0.025% accuracy and 0.001 mA resolution
  • Wide range of selectable measurement units for pressure
  • 24 volt loop power supply
  • Min-Max Hold and damp functions
  • 1/8 inch NPT female pressure fitting
  • Simple, push-button user interface
  • Compact size and weight
  • 3 year warranty

The complete solution to pressure calibration

Fluke 718-1G Pressure Calibrator is a compact, lightweight and easy to carry calibrator that delivers outstanding performance, durability and reliability. The Fluke 718 Calibrator is EMI tolerant, dust and splash resistant and features a removable battery door for quick battery changes.
The Fluke 718 simultaneously measures pressure and mA and delivers 24 volt loop supply while measuring mA. The Fluke 718 provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
This new Pressure Calibrator presents cost-effective solutions for highly accurate pressure measurements over a wide range of temperatures. Connect it with any of the Fluke pressure modules to address a wide variety of gage, differential, absolute, vacuum and dual (compound) pressure applications.


  • Temperature from Thermocouple output
  • Loop Current
  • Pressure, 0.05% of full scale
  • Temperature from RTD output
  • Pressure to 10,000 psi/69 mPa using one of 29 Fluke pressure modules
  • Pressure, 0.05% of full scale with internal 30 psig sensor
Technical Specifications
718 Series
Measure Pressure (internal sensor)
Accuracy 0.05% full scale
Functions zero, min/max, hold, damp
Note Dry air, non-corrosives only
718 1G
Range -1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
Resolution 0.0001 psi, 0.001 mbar, 0.0001 kPa
Over Pressure 5x Full Scale
Functions Zero, Min, Max, Hold, Damp
Fluke 718 series via using 700 Series Pressure Modules
Range 29 pressure modules, 0 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs
Resolution Per pressure module specs
Accuracy To 0.025 % of full span, per pressure module specs
Functions Zero, Min, Max, Hold, Damp

Note: media compatibility per pressure module specs
Fluke 718 series via built in pump
Range -12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm
Loop Power Range: 24 V dc

Accuracy: +/- 10 %

Note: Drive; 20 mA into 1000 Ω for battery > 6.8V; 700 Ω for battery 5.8 to 6.8 V
mA Measure Range: 0 mA to 24 mA

Resolution: 0.001 mA

Accuracy: 0.015 % + 1 count
General Specifications
Maximum voltage

30 volts: Non-operating

-40 °C to 60 °C
Operating Temperature

-10 °C to 55° C
Relative Humidity

95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating Altitude

3,000 M max

1 M drop test

Random, 2 g, 5 Hz 500 Hz

CSA C22.2 No. 1010.1: 1992

EN50082-1: 1992 and EN55022: 1994 Class B

216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in)

992 g (35 oz)
Power, battery life

9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery Life

4 to 20 hours typical, depending on functions used

Three years (one year on pressure pump in Fluke 718)

LCD, 5 digit pressure and current simultaneous

For use with non-corrosive gasses
Click here for complete specifications on the Fluke 718-1G

  • Protective Yellow Holster with test lead storage
  • Instructions Sheet (14 languages)
  • Test Leads and Alligator Clip
  • Two 9V alkaline batteries


Click on a category to view a selection of compatible accessories with the Fluke 718-1G Pressure Calibrator.

Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit TL225 2646
Voltage Adapter Test Lead Kit makes sure the meter has a low input impedance that eliminates stray voltages and indicates real voltage.
$107.99 USD


Learn More

Fluke TL71 Premum DMM Test Lead Set TL71 2005
Comfort grip probes with silicone insulated, right-angle test leads.
$29.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More

Fluke TL75 Hard Point Test Lead Set TL75 2007
Comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs.
$24.99 USD

Learn More

Fluke TL220 Suregrip Industrial Test Lead Set TL220 1990
Includes Fluke AC220, Fluke TP220, and Fluke TL224.
$79.99 USD

Learn More

$143.99 USD


Learn More

Fluke TL76 All-in-one Test Lead Set TL76 2008
2mm/4mm 1.5 meter long silicone test leads with right angle shrouded banana plug.
$34.99 USD

Learn More

Fluke TL221 Suregrip Silicone Test Lead Extension Kit TL221 1992
Test Lead Extension Kit designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TL80A Basic Electronic Test Lead Set TL80A 2009
1 meter long silicone test lead set, alligator clip and probe tip extender in a soft carrying case.
$79.99 USD

Learn More

Fluke TL223 Suregrip Electrical Test Lead Set TL223 1994
includes Fluke AC220, TP1, TL224.
$79.99 USD

Learn More

Fluke TL81A Deluxe Electronic Test Lead Set TL81A 2010
Test Lead Set in quad-fold nylon pouch works with DMMs that accept safety shrouded, standard diameter banana connectors.
$134.99 USD


Learn More

Fluke TL224 SureGrip Silicone Insulated Test Leads TL224 1995
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP220 SureGrip Industrial Test Probes TP220 2045
For use with TL222 and TL224 test leads provides reliable contact.
$19.99 USD

Learn More

Fluke TL238 Test Lead Set for High Energy Environment TL238 1996
Designed for high energy environments. Kit includes Fluke TP238, TP280, TL224.
$79.99 USD

Learn More

Fluke TL222 SureGrip Silicone Insulated Test Leads TL222 1993
Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TL27 Heavy Duty Test Lead Set TL27 2000
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.
$34.99 USD

Learn More

Fluke TL40 Retractable Tip Test Lead Set TL40 2004
Adjustable to desired length from 0 to 76mm.
$44.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set TP1 2040
For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$19.99 USD

Learn More

Fluke TP2 Slim Reach Test Probe Set TP2 2044
For probing closely spaced or recessed terminals compatible with AC72.
$19.99 USD

Learn More

Fluke TP 38 Slim Reach Test Probe Set TP38 2048
For probing closely spaced or recessed terminals.
$19.99 USD

Learn More

Fluke TP4 Slim Reach Test Probe Set TP4 2049
Designed to fit securely into IEC electrical wall outlets.
$19.99 USD

Learn More

$656.96 USD


Learn More

$79.99 USD

Learn More

$719.99 USD


Learn More

$449.99 USD


Learn More

Fluke 700PRV-1 Pressure Relief Valve Kit 700PRV-1 1326
To be used with Fluke 700HTP-1 Hydraulic Test Pump.
$629.99 USD


Learn More

Fluke C25 Large Soft Case C25 1437
For use with Fluke Multimeters.
$39.99 USD

Learn More

Fluke C550 Premium Tool Bag C550 1447
Tool Bag with steel reinforced frame.
$99.99 USD

Learn More

$125.99 USD


Learn More

Fluke C100 Hard Sided Carrying Case C100 1428
Carrying Case for all handheld multimeters.
$59.99 USD

Learn More

Fluke i410 AC/DC Current Clamp I410 1826
1 to 400 Amps DC/1 to 400 Amps AC. For use with digital multimeters, scope meters and power quality analyzers.
$242.99 USD


Learn More

Fluke i1010 AC/DC Current Clamp I1010 1821
For use with Digital Multimeters and Calibrators. Features a Current Range of 1A to 600A AC and 1A to 1000A DC.
$382.49 USD


Learn More

Fluke AC280 SureGrip Hook Clips AC280 1401
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$34.99 USD

Learn More

Fluke AC283 SureGrip Pincer Clips AC283 1402
Flexible, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

Fluke 771 Milliamp Process Clamp Meter 771 4149
Measures, tests, and troubleshoots 4-20 mA control signals without breaking the mA loop!
$539.99 USD


Learn More

Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89 1412
Insulated, Shrouded Banana Jack. One Red.
$44.99 USD

Learn More

Ask a question about the Fluke 718-1G Pressure Calibrator:

comments powered by Disqus

Review the Fluke 718-1G Pressure Calibrator

" data-description="Pressure Calibrator -1 to 1 PSI, (-68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa).">