Fluke i3000s Flex-36 AC Current Clamp, 36"

Model: I3000S-FLEX-36

36" length, 3000A max, switchable current range for 30A, 300A or 3000A using a 1mA/A, 10mV/A or 100mV/A output and BNC connector.

Add In House NIST Traceable Calibration to your I3000S-FLEX-36

Clear selected options


$562.49 USD

was $624.99

1 to 2 Weeks




 

Fluke I3000S-FLEX-36 Offers

The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Features

  • Three Ranges: 30A, 300A, and 3000A with 1, 10, or 100 mV/A output
  • Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
  • Maximum conductor diameter 178 mm (7 in.)
  • CAT III 600 V safety rating
Electrical specifications
Current ranges

30 A

300 A

300 A

AC rms
Output sensitivity (AC-coupled)

1 mV per A

100 mV

10 mV

1 mV per A
Load impedance

100 kΩ minimum
Accuracy
at +25 °C ± 1 % of range (45 Hz to 65 Hz)
Linearity
10 % to 100 % of range ± 0.2 % of reading
Noise

8 mV ac rms (30 A)

2 mV ac rms (300 A, 3000 A)
Frequency range

10 Hz to 50 kHz (-3 dB)
Phase error

< ± 1° (45 Hz to 65 Hz)

± 10° (at 20 kHz)
Position sensitivity
with cable > 25 mm from the coupling ± 2 % of range
External field
with cable > 200 mm from the head ± 1 % of range
Power supply

2 x AA/MN 1500/LR6 Alkaline, , 400 hours, low battery indicator or dedicated external power supply
Temperature Coefficient

± 0.08% of reading per °C
Working voltage
see Safety standards section 600 V AC rms or DC
General Specifications
Head cable length (double insulated)
i3000s Flex 610 mm (24 in)
i3000s Flex-36 915 mm (36 in)
Head cable diameter

14.3 mm (0.56 in)
Head bend radius

38.1 mm (1.5 in)
Cable length (head to electronics)

2 m (6.56 ft)
Output connection

0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter
Operating temperature range

-20 °C to +90 °C (-4 °F to 190 °F) (head)

-20 °C to +85 °C (-4 °F to 185 °F) (electronics)
Storage temperature range

-40 °C to +105 °C (-40 °F to 221 °F) (head)

-20 °C to +85 °C (-4 °F to 185 °F) (electronics)
Operating humidity

15 % to 85 % (non-condensing)
Weight

180 g (0.396 lb) (head)

190 g (0.419 lb) (electronics)
Safety standards

BS EN 61010-1: 2001

BS EN 61010-2-032: 2002

BS EN 61010-031: 2002

600 Vrms, Category III, Pollution Degree 2

Use of the probe on uninsulated conductors is limited to 600 V AC rms or dc and frequencies below 1 kHz.
EMC standards

EN 61326: 1998 +A1, A2, & A3
Maximum conductor size

610 mm or 914 mm, depending on model

Ask a question about the Fluke i3000s Flex-36 AC Current Clamp, 36":

comments powered by Disqus

Review the Fluke i3000s Flex-36 AC Current Clamp, 36"

" data-description="36" length, 3000A max, switchable current range for 30A, 300A or 3000A using a 1mA/A, 10mV/A or 100mV/A output and BNC connector.">