Fluke T+CAN Electrical Tester

Model: T+CAN

Bright LED flashlight, extra heavy-duty, GFCI Trip.

This product has been discontinued. Click here for the replacement model.


The Fluke T+ Electrical Tester offers all the functionality that electricians look for in volt meters and voltage and continuity testers. It is the basic electrical tester for residential electricians and HVAC technicians, who need a durable, reliable tool for testing voltage and continuity. It has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks.
The Fluke T+ Electrical Tester has three ways to detect ac/dc voltage: light, sound, and vibration. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, it is an excellent choice for most light residential, and HVAC applications.
The Fluke T+ Electrical Tester helps electricians comply with NPFA 70E Article 110.9 (A), which states that "Test equipment shall be rated for circuits and equipment to which they will be connected. The T+ Electrical Tester carries a CAT IV 600 V and CAT III 1000 V rating, appropriate for most environments where electricians work.
  • Best suited for Commercial and residential electricians, HVAC technicians, and Apprentices.
  • Front-line residential electrical troubleshooting
  • AC/DC voltage measurement
  • Continuity testing
  • Testing GFCI circuits
  • Resistance measurement

Operating -10 °C to 55 °C (14 °F to 131 °F)
Storage -30 °C to 60 °C (-22 °F to 140 °F)
Relative humidity

0 °C to 30 °C (32 °F to 86 °F): 90 %

30 °C to 40 °C (86 °F to 104 °F): 75 %

40 °C to 50 °C (104 °F to 122 °F): 45 %
Operating 2,000 m (approx. 6,561.6 ft)
Storage 10,000 m (approx. 32,808.4 ft)
Battery type/life

AAA (2); 40 hours
Shock, vibration

Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument

ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV

Compliance to NFPA 70E*
AC Bandwidth

45 Hz to 66 Hz
Maximum working voltage

1000 V ac/dc
Maximum measurable voltage

600 V ac/dc
Duty cycle

Indefinitely for voltages up to 240 V

For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off

For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s
Voltage hazard LED

LEDs turn on at voltages > 30 V ac/dc ± 35 %
LED voltage indication levels

12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V

LEDs turn on between 90 % and 100 % of the indicated voltage on the LED, except for the 12 V LED which turns on between 50 % and 100 %
LCD Resolution

0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V

0.01 kΩ for resistance measurement (For T+PRO Only)
GFCI Test current

100 V - 150 V @ 6 mA - 9 mA ac, 150 V - 240 V < 12 mA
Standard input test current

< 5 mA
Size (HxWxL)

1.3 in x 2.15 in x 7.6 in (3.3 cm x 5.46 cm x 19.3 cm )

9.9 oz (0.28 kg)
Click here for complete specifications on the Fluke T+CAN

  • User manual
  • Test lead wrap
  • Fluke TP2 test probes
  • 2 AAA Batteries


Click on a category to view a selection of compatible accessories with the Fluke T+CAN Electrical Tester.

Fluke AC220 SureGrip Alligator Clips AC220
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$45.99 USD

Learn More

Fluke AC280 SureGrip Hook Clips AC280
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$35.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285
Large alligator clip for test leads used with Fluke meters.
$25.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set TP1
For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$20.49 USD

Learn More

Fluke TP2 Slim Reach Test Probe Set TP2
For probing closely spaced or recessed terminals compatible with AC72.
$20.49 USD

Learn More

Fluke LVD2 Volt Light, Non Contact Voltage Detector & LED flashlight LVD2
Non-contact AC voltage detector and LED flashlight includes dual sensitivity turning blue 1" to 5" for the source and red at the source.
$39.99 USD

Learn More

Ask a question about the Fluke T+CAN Electrical Tester:

comments powered by Disqus

Review the Fluke Corporation T+CAN

" data-description="Bright LED flashlight, extra heavy-duty, GFCI Trip.">