Home » Fluke 1623 Basic GEO Earth Ground Tester
Fluke 1623 Basic GEO Earth Ground Tester
Yes! Available up to 
USD 
Shipping Information:
Ships in 1 - 3 Days
Arrives:
Arrives:
May 25-
May 31
Max of 1 unitsMay 31
$0.00 or FREE
for orders of $199
for orders of $199
Fast: Ships tomorrow*
Arrives:
Arrives:
May 24
Max of 1 units
$69.00
Fastest: Overnight
Arrives:
Arrives:
May 23
Max of 1 units
$99.00
The Fluke 1623 is perfect for performing predictive maintenance checks of commerical and industrial applications.
The Fluke 1623 is an all-in-one earth ground tester, offering 'one-button' simplicity. Not only measure ground resistance using the classic 'fall of potential test' but also enable time saving testing using the 'selective' and 'stakeless' methods. 'Selective' testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple 'stakeless' method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test.
Testing Methods
Earth ground resistance and soil resistivity should be measured when:
The Fluke 1623 Kit has everything you need to get started.
For an advanced model see the Fluke 1625
What's Included:
The Fluke 1623 is an all-in-one earth ground tester, offering 'one-button' simplicity. Not only measure ground resistance using the classic 'fall of potential test' but also enable time saving testing using the 'selective' and 'stakeless' methods. 'Selective' testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple 'stakeless' method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test.
Testing Methods
- 3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
- 4-Pole Soil Resistivity testing – determine soil resistivity using four ground stakes
- Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
- Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
Earth ground resistance and soil resistivity should be measured when:
- Designing earth ground systems
- Installing new ground system and electrical equipment
- Periodically testing ground and lightning protection systems
- Installing large electrical equipment such as transformers, switchgears, machines, etc.
The Fluke 1623 Kit has everything you need to get started.
For an advanced model see the Fluke 1625
What's Included:
- Fluke 1623 tester
- 2 test leads
- 2 alligator clips
- Batteries
- Users manual
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- 2-Pole Resistance Test
- 3-Pole Fall-of-Potential Test
- 4-Point Soil Resistivity Test
- 4-Pole Fall-of-Potential Test
- Resistance 20kω max resistance
- Resolution 0.001ω max resolution
- Selective Conductor Testing
- Stakeless Ground Testing
- Test While De-Energized
- Test While Energized
| CAT II Rating | 300v |
| Dimensions | 133 mm x 187 mm x 250 mm |
| IP Rating | ip56 for case, ip40 for battery door |
| Maximum Resistance Resolution | 0.001ω |
| Measuring Frequency | 128hz |
| Operating Temperature | 0 °c to +35 °c |
| Storage Temperature | -20 °c to +60 °c |
| Warranty | 2 years |
| Weight | 1.1 kg |
Product brochures
Product training
Technical documents
Product manuals
No user reviews available.
