Fluke 68IS Intrinsically Safe (FM) IR Thermometer w/RTD Probe

Model: 68IS

Sorry! This product has been discontinued.


The Fluke 68IS Intrinsically Safe (FM) IR Thermometer w/RTD Probe has been discontinued, and does not currently have a replacement. If you would like a recommendation please call us at 1.877.766.5412



 

  • Laser guided sighting system for easy targeting with 1 % accuracy
  • 12-point data logging
  • Advanced optics to measure smaller targets at greater distances
  • Adjustable emissivity for more accurate temperature measurements
  • Selectable MAX, MIN, DIF and AVG functions that display values instantly with Hi/Lo Alarm
  • Expanded measurement range up to 760 ēC (1400 ēF)
  • Optional probe accessory available for dual contact and non-contact temperature measurements
The 68IS (Intrinsically Safe) model is approved by Factory Mutual Research, a USA organization, for use in hazardous locations. Factory Mutual Research Intrinsically Safe approval, including probe (Intrinsically Safe, Class I, Division 1, Groups A, B,C,D Class I, Zone 0, AEx ia IIC, T4 at 50 C when used with 9 V alkaline battery.) Approval does not apply to atmosphere containing coal dust, grain dust, metal dust, or fibers.
Check your national and company regulations to determine if this approval is appropriate for your situation. Not available for purchase in Europe.
Temperature range 
Fluke 66         -32 to 600 °C (-25 to 1100 °F)                                                        Fluke 68/68IS*      -32 to 760 °C (-25 to 1400 °F) 
   
Accuracy     -32 to -26 °C (-25 to -15 °F): ±3 °C (±5 °F)     
(assumes ambient     -26 to -18 °C (-15 to 0 °F): ±2.5 °C (±4 °F)     
operating temperature     -18 to 23 °C (0 to 73 °F): ±2 °C (±3 °F)     
of 23 °C [73 °F])    
For targets above 23 °C (73 °F): ±1 % or reading or ±1 °C (±2 °F), whichever is greater     
Repeatability     ±0.5 % or ≤ ±1 °C (±2 °F), whichever is greater     
Response time     ≤ 0.5 second (95 % of reading)     
Spectral response     8 to 14 µm     
Emissivity     Digitally adjustable emissivity (from 0.1 to 1.0 by 0.01)     
Ambient operating temp.     0 to 50 °C (32 to 120 °F)     
Relative humidity     10 to 90 % RH non-condensing, at <30 °C (86 °F) ambient     
Storage temperature     -20 to 60 °C (-13 to 158 °F) without battery     
Dimensions     200 x 160 x 55 mm (8 x 6 x 2 in.)     
Weight     320 g (11 oz.)     
Power     9 V alkaline or NiCd battery     
Batter life (alkaline)     20 hours with laser and backlight on 50 % 40 hours with laser and backlight off     
Laser sighting (Class II)     Offset single point laser point     
Typical distance to target     5 m (15 ft.)     8 m (25 ft.)     
Distance to Spot (D:S)     30:1 at focus point     50:1 at focus point     
MIN, MAX, AVG, DIF     •     
Temperature display     
Data logging     12 points     
Probe jack     •     
Display hold (7 seconds)     •     
Hi/Low alarm     •     
LCD backlit     •     
Temperature display     °C or °F selectable     
Display resolution     0.1 °C (0.1 °F)     
Hard carrying case     •     
Locking trigger     •     
Tripod mounting     6.35 mm (.25 in.) 20 UNC threading     
Warranty     2 years, conditional     
Click here for complete specifications on the Fluke 68IS

Ask a question about the Fluke 68IS Intrinsically Safe (FM) IR Thermometer w/RTD Probe:

comments powered by Disqus

Review the Fluke 68IS Intrinsically Safe (FM) IR Thermometer w/RTD Probe

" data-description="">