Fluke 726 Precision Multifunction Process Calibrator

Model: 726

2 channels to measure AND source/simulate simultaneously. Measure AND source volts, mA, RTDs, thermocouples, frequency, and resistance. Optional pressure modules to source/measure pressure. High accuracy.

Add In House NIST Traceable Calibration to your 726

Clear selected options


$3,749.99 USD

2 to 3 Weeks




 


  • More precise measurement and calibration source performance, accuracies of 0.01%.
  • Two separate channels; measure, source and view process signals simultaneously
  • Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
  • Measure or source pressure* using any of 29 Fluke 700Pxx Pressure Modules
  • Source mA with simultaneous pressure measurement to conduct valve and I/P tests
  • Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
  • Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
  • Transmitter error% calculation, interpret calibration results without a calculator
  • Perform fast linearity tests with auto step and auto ramp features
  • Power transmitters during test using 24 V loop supply and simultaneous mA measurement
  • Store frequently-used test setups for later use
  • Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
  • HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
  • Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement.
  • New voltage input protection design for improved reliability
  • Three-year warranty

Get More Calibration Power
The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind.
The Fluke 726 measures and sources almost all process parameters and can calibrate almost anything. Also, the Fluke 726 will interpret results without the help of a calculator and store measurement data for later analysis.
Measurement Accuracy
Voltage DC
30.000 V0.01%+ 2 mV (upper display)
20.000 V0.01%+ 2 mV (lower display)
90.00 mV0.01%+ 10μV
-10.00 mV to 75.00 mV0.025 % + 1 count (via TC connector)
Current DC
24.000 mA0.01%+ 2 mA
Resistance
0.0 to 4000.0 Ω+/- 0.015%
Frequency
2.0 to 1000.0 CPM0.05 % + 0.1 cpm
1.0 to 1000.0 Hz0.05 % + 0.1 Hz
1.00 to 15.00 kHz0.05 % + 0.01 kHz
Sensitivity1 V peak-to-peak-minimum
Pressure
Accuracyfrom 0.025% of range using any of 29 pressure modules.

(for detailed specifications refer to pressure modules in options and accessories)

Modules available for differential, gage, vacuum, absolute, dual and high pressure.

Source Accuracy
Voltage DC
100.00 mV0.01%+10 μV
20.000 V0.01%+2 mV
-10.00 mV to 75.00 mV0.025 % + 1 count (via TC connector)
Current DC
24.000 mA (Source)0.01%+ 2 μA
24.000 mA (Simulate)0.01%+ 2 μA
Resistance
Range, Accuracy (Percent of reading + floor) and Excitation Current5 to 400 Ω, 0.015% + 0.1 Ω, 0.1 to 0.5mA

5 to 400 Ω, 0.015% + 0.05 Ω, 0.5 to 3mA

400 to 1500 Ω, 0.015% + 0.5 Ω, 0.05 to 0.8 mA

1500 to 4000 Ω, 0.015% + 0.5 Ω, 0.05 to 0.4 mA
Frequency
2.0 to 1000.0 CPM0.05%
1.0 to 1000.0 Hz0.05%
1.0 to 10.0 kHz0.25%
10.0 to 15.0 kHz0.5%
Waveform5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples
Measure and Source Accuracy
Cu101.8 °C
NI-1200.15 °C
PT-100 (385)0.45 °C
PT-100 (392)0.35 °C
PT-100 (391-JIS)0.35 °C
PT-200 (385)0.95 °C
PT-500 (385)0.55 °C
PT-1000 (385)0.35 °C
RTD ResolutionCu10 0.1 °C
J0.4 °C
K0.5 °C
T0.4 °C
E0.4 °C
R1.4 °C
S1.4 °C
B1.4 °C
L0.45 °C
U0.45 °C
N0.6 °C
XK0.4 °C
BP1.1 °C
TC ResolutionJ, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F

Specifications
Ramp Functions
Source functionsVoltage, current, resistance, frequency, temperature
RampsSlow ramp, Fast ramp, 25% step-ramp
Loop Power Function
Voltage24 V
Accuracy10%
Maximum current22 mA, short circuit protected
Step Functions
Source functionsVoltage, current, resistance, frequency, temperature
Steps25% of range, 100% of range

Environmental Specifications
Operating Temperature

-10 °C to +55 °C
Storage Temperature

-20 °C to +71 °C
Operating Altitude

3000 m

Safety Specifications
Agency Approvals

EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992

Mechanical & General Specifications
Size

200mm x 96mm x 47mm (7.9 in x 3.8 in x 1.9 in)
Weight

650 g (23 oz.)
Batteries

4 AA alkaline batteries
Battery Replacement

Separate battery compartment, accessible without breaking calibration seall
Side port connections

Pressure module connector, also used for remote real-time programming

Click here for complete specifications on the Fluke 726

  • Fluke AC72 alligator clips
  • One set of stackable test leads
  • Fluke TL75 test leads
  • Product overview manual (print)
  • User manual (CD-ROM) (14 languages)

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 726 Precision Multifunction Process Calibrator.

Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25 1375
K-Type, Piercing Temperature Probe, SureGrip.
$107.99 USD

was$119.99


Learn More

Fluke 80PJ-1 Type J Bead Probe 80PJ-1 1369
J-Type, General Purpose Thermocouple Bead Temperature Probe.
$29.99 USD

Learn More



Fluke 80PJ-9 General Purpose Probe 80PJ-9 1370
J Type General Purpose Temperature Probe.
$69.99 USD

Learn More

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27 1377
K-Type, Industrial Surface Temperature Probe.
$296.99 USD

was$329.99


Learn More



Fluke 80PK-3A Surface Probe 80PK-3A 1378
Flat Surface Temperature Probe.
$143.99 USD

was$159.99


Learn More

Fluke 80PK-1 Bead Probe 80PK-1 1372
K-Type General Purpose Thermocouple Bead Temperature Probe.
$34.99 USD

Learn More


Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8 1381
Pipe Clamp Temperature Probe.
$161.99 USD

was$179.99


Learn More

Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22 1373
Type K Immersion Temperature Probe designed with a superior gripping surface made from thermoplastic rubber.
$99.99 USD

Learn More

$29.99 USD

Learn More

Fluke 80PK-9 General Purpose Probe 80PK-9 1382
General Purpose, Surface/Air/Gas/HVAC, Temperature Probe.
$69.99 USD

Learn More

Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24 1374
K-Type, Air and Gas Temperature Probe.
$107.99 USD

was$119.99


Learn More

$29.99 USD

Learn More

Fluke 80PK-EXT Extension Wire Kit 80PK-EXT 1383
Type K.
$59.99 USD

Learn More


Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89 1412
Insulated, Shrouded Banana Jack. One Red.
$44.99 USD

Learn More

Fluke TL71 Premum DMM Test Lead Set TL71 2005
Comfort grip probes with silicone insulated, right-angle test leads.
$29.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set TP1 2040
For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$19.99 USD

Learn More

Fluke TL220 Suregrip Industrial Test Lead Set TL220 1990
Includes Fluke AC220, Fluke TP220, and Fluke TL224.
$79.99 USD

Learn More

Fluke TL224 SureGrip Silicone Insulated Test Leads TL224 1995
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TL932 Patch Cord Set 36" (90 cm) TL932 2025
36" (90 cm) (30V rms or 60V DC, 15A).
$19.99 USD

Learn More


Fluke TL75 Hard Point Test Lead Set TL75 2007
Comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs.
$24.99 USD

Learn More

Fluke TP2 Slim Reach Test Probe Set TP2 2044
For probing closely spaced or recessed terminals compatible with AC72.
$19.99 USD

Learn More

Fluke TL221 Suregrip Silicone Test Lead Extension Kit TL221 1992
Test Lead Extension Kit designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More

Fluke TL238 Test Lead Set for High Energy Environment TL238 1996
Designed for high energy environments. Kit includes Fluke TP238, TP280, TL224.
$79.99 USD

Learn More

Fluke TL935 Patch Cord Kit TL935 2026
Kit of 60, 90, and 120cm cords. 30V RMS or 60V DC, and 15A.
$49.99 USD

Learn More


Fluke TL76 All-in-one Test Lead Set TL76 2008
2mm/4mm 1.5 meter long silicone test leads with right angle shrouded banana plug.
$34.99 USD

Learn More

Fluke TP220 SureGrip Industrial Test Probes TP220 2045
For use with TL222 and TL224 test leads provides reliable contact.
$19.99 USD

Learn More

Fluke TL222 SureGrip Silicone Insulated Test Leads TL222 1993
Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke AC280 SureGrip Hook Clips AC280 1401
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$34.99 USD

Learn More

Fluke TL26A 60 in. Telecom 5-Way Test Lead Set TL26A 1999
60" (1.5m), silicone-insulated leads, useable from -80 to 150°C (-112 to 302°F). Rated for 30V, 10A. One red, one black.
$59.99 USD

Learn More

Fluke TL940 Mini-Hook Test Lead Set TL940 2027
30V RMS or 60V DC, and 15A.
$24.99 USD

Learn More

Fluke AC120 Alligator Clips AC120 1534
Set of 3.
$39.99 USD

Learn More

Fluke TL80A Basic Electronic Test Lead Set TL80A 2009
1 meter long silicone test lead set, alligator clip and probe tip extender in a soft carrying case.
$79.99 USD

Learn More

Fluke TP 38 Slim Reach Test Probe Set TP38 2048
For probing closely spaced or recessed terminals.
$19.99 USD

Learn More

Fluke AC283 SureGrip Pincer Clips AC283 1402
Flexible, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More

Fluke TL27 Heavy Duty Test Lead Set TL27 2000
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.
$34.99 USD

Learn More

Fluke TL950 Mini-Pincer Test Lead Set TL950 2028
30V RMS or 60V DC, and 15A.
$44.99 USD

Learn More

Fluke TL81A Deluxe Electronic Test Lead Set TL81A 2010
Test Lead Set in quad-fold nylon pouch works with DMMs that accept safety shrouded, standard diameter banana connectors.
$134.99 USD

was$149.99


Learn More

Fluke TP4 Slim Reach Test Probe Set TP4 2049
Designed to fit securely into IEC electrical wall outlets.
$19.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

Fluke TL28A Automotive Test Lead Set TL28A 2001
Heat and cold resistant.
$49.99 USD

Learn More

Fluke TL960 Micro-Hook Test Lead Set TL960 2029
30V RMS or 60V DC, and 15A.
$29.99 USD

Learn More

Fluke TL910 Electronic Test Probe Set TL910 2012
Comfortable and allows accessibility to hard to reach test points.
$69.99 USD

Learn More


Fluke AC87 Heavy Duty Bus Bar Clip Set AC87 1411
Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More

Fluke TL40 Retractable Tip Test Lead Set TL40 2004
Adjustable to desired length from 0 to 76mm.
$44.99 USD

Learn More

Fluke TL970 Hook and Pincer Kit TL970 2030
Kit includes TL940 Mini-Hook Test Lead Set, TL950 Mini-Pincer Test Lead Set, and TL960 Micro-Hook Test Lead Set.
$89.99 USD

Learn More

$143.99 USD

was$159.99


Learn More

Fluke TL223 Suregrip Electrical Test Lead Set TL223 1994
includes Fluke AC220, TP1, TL224.
$79.99 USD

Learn More

Fluke TL930 Patch Cord Set (60 cm) TL930 2024
30V RMS or 60V DC, and 15A.
$19.99 USD

Learn More

Fluke 700PRV-1 Pressure Relief Valve Kit 700PRV-1 1326
To be used with Fluke 700HTP-1 Hydraulic Test Pump.
$629.99 USD

was$699.99


Learn More

$656.96 USD

was$729.95


Learn More

$539.99 USD

was$599.99


Learn More

$719.99 USD

was$799.99


Learn More


$449.99 USD

was$499.99


Learn More


Fluke C100 Hard Sided Carrying Case C100 1428
Carrying Case for all handheld multimeters.
$59.99 USD

Learn More

Fluke C781 Meter Case C781 1452
Zippered with detachable pouch.
$69.99 USD

Learn More

Fluke C120 Hard Carrying Case C120 1429
For use with the Fluke 120 Series.
$116.99 USD

was$129.99


Learn More



Fluke C25 Large Soft Case C25 1437
For use with Fluke Multimeters.
$39.99 USD

Learn More


Fluke C550 Premium Tool Bag C550 1447
Tool Bag with steel reinforced frame.
$99.99 USD

Learn More

Fluke i1010 AC/DC Current Clamp I1010 1821
For use with Digital Multimeters and Calibrators. Features a Current Range of 1A to 600A AC and 1A to 1000A DC.
$382.49 USD

was$424.99


Learn More

Fluke i410 AC/DC Current Clamp I410 1826
1 to 400 Amps DC/1 to 400 Amps AC. For use with digital multimeters, scope meters and power quality analyzers.
$242.99 USD

was$269.99


Learn More

Fluke 771 Milliamp Process Clamp Meter 771 4149
Measures, tests, and troubleshoots 4-20 mA control signals without breaking the mA loop!
$539.99 USD

was$599.99


Learn More


Ask a question about the Fluke 726 Precision Multifunction Process Calibrator:

comments powered by Disqus

Review the Fluke 726 Precision Multifunction Process Calibrator

" data-description="2 channels to measure AND source/simulate simultaneously. Measure AND source volts, mA, RTDs, thermocouples, frequency, and resistance. Optional pressure modules to source/measure pressure. High accuracy. ">