Fluke i2000 flex AC Current Clamp

The Fluke i2000flex AC Current Clamp increases the current measurement range of your Fluke digital multimeter.

The Fluke i2000flex is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation and measurement of odd-shaped objects without breaking the circuit.

Used in conjunction with multimeters, recorders, data loggers, power quality analyzers, or oscilloscopes.

• Three ranges: 20A, 200 A & 2000 A, 1 mV, 10 mV or 10 mV/A output
• Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
• Maximum conductor diameter 178 mm
• CAT III 600V safety rating

Full Review

Electrical specifications
Current ranges	20 A 200 A 2000 A AC rms
Output sensitivity (AC-coupled)	100 mV 10 mV 1 mV 1 mV per A
Load impedance	100 kΩ minimum
Accuracy	at +25 °C ± 1 % of range (45 Hz to 65 Hz)
Linearity	10 % to 100 % of range ± 0.2 % of reading
Noise	8 mV ac rms (30 A) 2 mV ac rms (300 A, 3000 A)
Frequency range	10 Hz to 20 kHz (-3 dB)
Phase error	< ± 1 º (45 Hz to 65 Hz) ± 10 º (at 20 kHz)
Position sensitivity	with cable > 25 mm from the coupling ± 2 % of range
External field	with cable > 200 mm from the head ± 1 % of range
Power supply	2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient	± 0.08% of reading per°C
Working voltage	see Safety standards section 600 V AC rms or DC

General Specifications
Head cable length (double insulated)	610 mm (24 in)
Head cable diameter	14.3 mm (0.56 in)
Head bend radius	38.1 mm (1.5 in)
Cable length (head to electronics)	2 m (6.56 ft)
Output connection	Molded 4 mm safety plugs (not integrated)
Operating temperature range	0 °C to +70 °C (32 °F to 158 °F) (head and electronics)
Storage temperature range	-40 °C to +105 °C (-40 °F to 221 °F) (head) -20 °C to +85 °C (-4 °F to 185 °F) (electronics)
Operating humidity	15 % to 85 % (non-condensing)
Weight	180 g (6.34 oz) (head) 190 g (6.70 oz) (electronics)
Safety standards	EN 61010-1: 2001 EN 61010-2-032: 2002 EN 61010-031: 2002 600 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
EMC standards	EN 61326: 1998 +A1, A2, & A3
Dimensions	HxWxD 116 mm x 68.5 mm x 30 mm (4.56 in x 2.69 in x 1.18 in)

Product manuals

No user reviews available.