The 80i-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
- Current Range: 0.1 to 100A DC or 0.1 to 70A AC
- Basic Accuracy (DC to 1kHz):
- 100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
- 10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA
- 40A to 80A +/- 12% of reading + 50mA
- 80 to 100A +/- 15% of reading
- Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
- Bandwidth: 1Hz to 20kHz
- Working Voltage: 600V AC rms
- Maximum Conductor Size: 11.8 mm (.46 inch) diameter
- Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
| Specifications |
| Nominal current range | |
| Continuous current range |
|
0.1 A - 10 A AC/DC |
|
1 A - 100 A AC/DC |
|
| Maximum
Non-Destructive Current | |
| Lowest measurable current | |
| Basic accuracy |
|
3% + 50 mA (@ 10 A) |
|
(% reading + floorspec) |
|
| Useable frequency | |
| Output level(s) | |
| Zero error adjustment | |
| Safety Specifications |
| Safety |
|
CAT II, 600 V |
|
CAT III, 300 V |
|
| Maximum voltage | |
| Mechanical & General Specifications |
| Warranty | |
| Battery Life | |
| Maximum conductor diameter | |
| Output cable length | |
| BNC Adapter | |
Product brochures
Product training
Product manuals
No user reviews available.
Yes! Available up to 
USD 
