Fluke T5 - 600/62 MAX+/1AC - II Electrical Tester IR Thermometer and Voltage Detector Kit

Model: T5-600/62-MAX+/1AC | Order No: T5-600/62MAX+/1AC

This kit is perfect for helping electricians and HVAC technicians solve problems faster. Featuring: Fluke T5-600 Voltage, continuity, and current tester; Fluke 1AC-II / 1LAC-II VoltAlert; Fluke 62 MAX+ Mini Infrared Thermometer.

Add In House NIST Traceable Calibration to your 62 MAX+

Add In House NIST Traceable Calibration to your T5-600

Clear selected options


$251.99 USD

was $279.99

2 to 3 Weeks




 

Fluke T5-600 Features:

  • Automatically measures volts ac and volts dc with precise digital resolution
  • Displays resistance to 1000Ω
  • Easy and accurate OpenJaw current measurement
  • Continuity beeper
  • Compact design with neat probe storage
  • Rugged enough to withstand a 10-foot (3m) drop
  • Detachable SlimReach probe tips are customized for national electrical standards
  • Test leads accept Fluke accessory test clips
  • Available in 600V and 1000V models
  • Can stay connected much longer than solenoid type tester
  • Auto off mode to conserve battery life
  • Optional holster attaches to a belt and neatly stows test leads

Fluke 62 MAX+ Features:

  • Dust and water-resistant: IP54 rated for dust and water resistance.
  • Rugged: 3-meter (9.8-foot) drop tested.
  • Ergonomically designed: Completely redesigned for a more natural hand fit.
  • Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box.
  • Distance to spot: Precise laser technology makes for more accurate and repeatable measurements.
  • Dual Lasers:The 62 MAX+ has dual rotating lasers to help you identify area to be measured. The measurement area is the spot between the dots.
  • Large, backlit display: Large screen makes data easier to read, even in dark areas.
  • Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.
  • Alarm: Hi and Lo alarms for rapid display of measurements outside the limits.
  • Power: Both the 62 MAX and 62 MAX+ are powered by a single, standard AA battery.

Fluke 1AC II Features:

  • Voltbeat™ technology and continuous self-test - so you always know it's working
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
  • 20 V to 90 V AC control circuit model also available
  • Two-year warranty

Fluke T5-600/62MAX+/1AC II IR Thermometer, Electrical Tester and Voltage Detector Kit

This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem.

What Comes With the Kit:

  • Fluke T5-600
  • Fluke 62 MAX+ IR Thermometer
  • Fluke 1AC II

About the Fluke T5-600:

Electrical tester with OpenJawTM Current

The Fluke T5-600 Electrical Tester lets you check voltage, continuity and current with one compact tool. With the T5-600, all you have to do is select volts, ohms, or current and the tester does the rest.

The OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5-600 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.

Also available in 1000V - see the Fluke T5-1000 Voltage, Continuity and Current Tester


About the Fluke 62 MAX+

Small in size extremely accurate and very easy to use. IP54 rated for dust and water resistance.

Designed with your on-the-job needs in mind, the new Fluke 62 MAX and 62 MAX + infrared thermometers are everything you'd expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX + are so tough, they're the only IR thermometers around you can handle without care.
If you've ever used an infrared thermometer, then you may have been fooled regarding the temperature reading. That's because IR thermometers project a measurement cone at a surface and take the average temperature of the cone at the target. Although most IR thermometers have a laser pointer, a laser is a line, not a cone, and you may think that you're getting temperature at the laser point only. Fluke's 62 Max+ uses two rotating laser pointers that show you the size of the measurement area. It covers the temperature range from -30°C to 650°C with a response time less than 300 ms. The Model 62 Max uses a single laser pointer and covers the temperature range from -30°C to 500°C.
The Max 62 and Max 62+ are designed to withstand drops up to 3 m. Is screen is located in a position and with a viewing angle (15°) that, in many cases, lets you see the display without having to move the thermometer from the measuring point. For most measurements, you simply pull the trigger once you've identified the measurement point.

Why IR Thermometers?

Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

Why Fluke 62 MAX and Fluke 62 MAX+?

Designed with your on-the-job needs in mind, the new Fluke 62 MAX and 62 MAX+ infrared thermometers are everything you'd expect from the experts in measurement tools: small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX+ are so tough, they're the only IR thermometers around you can handle without care.


About the Fluke 1AC II:

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Fluke T5-600 Specifications:

Specifications
Continuity beeper
Threshold: On at <25 Ω, off at >400 Ω
Volts indicator LED
Threshold: Guaranteed on by 30V ac

Environmental Specifications
Operating Temperature

-10 °C to 50 °C
Storage Temperature

-30 °C to 60 °C
Humidity (Without Condensation)

0% to 95% (5 °C to 30 °C)

0% to 75% (30 °C to 40 °C)

0% to 45% (40 °C to 50 °C)
Dust/water resistance

Yes
Operating Altitude

2000 meters max
Temperature Coefficient

0.1 x (specified accuracy)/degree C (<18 °C or >28 °C)

Safety Specifications
Overvoltage category
600V ac/dc, CAT III
Agency Approvals

UL, CSA, and VDE
Maximum voltage

between any terminal and earth ground

Mechanical & General Specifications
Size

30.5 x 51 x 203 mm
Weight

300g
Warranty

2 years
Battery Life

200 hour zinc chloride, 400 hour alkaline
Battery type

Two AA zinc chloride
Low battery indicator

Yes
Current sensor opening

12.9 mm
Calibration cycle

1 year
Test leads
TypeHeavy duty, flexible leads rated for 1000V use.

Field replaceable leads terminate in male shrouded banana plugs
ProbesOne red, one black. of two tip

Detachable Slim-ReachT probe tips in one
StylesTP4 4 mm round


Fluke 62 MAX+ Specifications:

Specifications

Temperature Range

Fluke 62 MAX -30 °C to 500 °C (-22 °F to 932 °F)
Fluke 62+ MAX -30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy
Fluke 62 MAX ±1.5 °C or ±1.5% of reading, whichever is greater
-10 °C to 0 °C: ±2.0
-30 °C to -10 °C: ±3.0
Fluke 62+ MAX ±1.0 °C or ±1.0% of reading, whichever is greater
-10 °C to 0 °C: ±2.0
-30 °C to -10 °C: ±3.0
Response Time (95%)
Fluke 62 MAX <500 ms (95% of reading)
Fluke 62+ MAX <300 ms (95% of reading)
Spectral Response 8 to 14 microns
Emissivity 0.10 to 1.00

Optical Resolution

Fluke 62 MAX 10:1 (calculated at 90% energy)
Fluke 62+ MAX 12:1 (calculated at 90% energy)
Display Resolution
0.1 °C (0.2 °F)
Repeatability of Readings
Fluke 62 MAX ±0.8% of reading or <±1.0 °C (2 °F), whichever is greater
Fluke 62+ MAX ±0.5% of reading or <±0.5 °C (1 °F), whichever is greater
Power
AA battery
Battery Life
Fluke 62 MAX 10 hours with laser and backlight on
Fluke 62+ MAX 8 hours with laser and backlight on

Physical Specifications

Weight 255 g (8.99 oz)
Size (175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
Operating Temperature 0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F), (without battery)
Operating Humidity 10 % to 90 % RH non-condensing at 30 °C (86 °F)
Operating Altitude 2000 meters above mean sea level
Storage Altitude 12,000 meters above mean sea level
IP Rating IP 54 per IEC 60529
Drop Test 3 meters
Vibration and Shock IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
EMC EN 61326-1:2006 EN 61326-2:2006

Standards and Agency Approval

Compliance EN/IEC 61010-1: 2001
Laser Safety FDA and EN 60825-1 Class II

Fluke 1AC II Specifications:

Operating principle

Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges

Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip style

Blade or round, depending on model
Light source

One high intensity red LED
Agency Approvals

c CSA us, CE, TUV, C-Tick
Safety Rating

1000 V, CAT IV
IP Rating

IP 40
Operating Temperature

-10 °C to 50 °C
Operating humidity ranges
0 % to 95 %(0 °C to 30 °C)
0 % to 75 %(30 °C to 40 °C)
0 % to 45 %(40 °C to 55 °C)
Operating Altitude

3000 meters
Batteries

2 AAA alkaline batteries included
Click here for complete specifications on the Fluke T5-600/62-MAX+/1AC

Accessories

Click on a category to view a selection of compatible accessories with the Fluke T5 - 600/62 MAX+/1AC - II Electrical Tester IR Thermometer and Voltage Detector Kit.




Fluke C33 Soft Vinyl Carrying Case C33 1439
Included with the 330 Series.
$34.99 USD

Learn More

Fluke T5 Tester Starter Kit T5-KIT 1984
Special value starter kit for the Fluke T5 Electrical Tester. Includes sharp test probes and alligator clips in a soft carry case.
$59.99 USD

Learn More


Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More


Ask a question about the Fluke T5 - 600/62 MAX+/1AC - II Electrical Tester IR Thermometer and Voltage Detector Kit:

comments powered by Disqus

Review the Fluke T5 - 600/62 MAX+/1AC - II Electrical Tester IR Thermometer and Voltage Detector Kit

" data-description="This kit is perfect for helping electricians and HVAC technicians solve problems faster. Featuring: Fluke T5-600 Voltage, continuity, and current tester; Fluke 1AC-II / 1LAC-II VoltAlert; Fluke 62 MAX+ Mini Infrared Thermometer.">