Fluke 124 Industrial ScopeMeter (102mm monochome LCD, 40MHZ; 20 Recordings)
Three-in-one simplicity for fast answers wherever you work.
In today's complex systems, a meter measurement just doesn't give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down, are best displayed with an oscilloscope. The Fluke 124 ScopeMeter meet today's need of simultaneously measuring and checking waveforms.
For industrial, electronic or electro mechanical applications, the compact Fluke 124 Industrial ScopeMeter is the rugged solution for industrial troubleshooting and installation applications. It features 40MHz bandwidth, Connect-and-View triggering automatically displays stable waveforms of virtually any signal and a dual DMM and a paperless recorder to get virtually any job done.
It is a truly integrated test tool in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.
Dual-input measurement shows both meter reading and waveform at the same time today's need of simultaneously ScopeMeter 123 combines a 20 MHz dual input digital storage oscilloscope, two true-rms digital multimeters and a dual input TrendPlot recorder all in a compact, battery powered instrument. Leave all other test tools behind, the ScopeMeter 123 is the only tool you'll need
Check the starting capacitor of a motor using the ScopeMeter 123 High frequency waveform-, meter-, capacitance- and resistance-measurements as well as continuity checks are all covered by the shielded test leads. No time wasted finding or swapping leads. The included accessories allow hook-up at test objects of every dimension.
Open the measure menu and select from 26 scope- and meter-measurements Working under time pressure and in cramped or difficult to reach locations means you want to focus on the job at hand, not on the test tool in your hand. Which is why the ScopeMeter 123 has Connect-and-View automatic triggering.You don't have to worry about triggering and instrument settings, and you have all the information on screen to do the job right.
Up to seven hours of battery operation frees you from mains outlets for true on-the- move working. The handheld format and the weight of just 1.2 kg, make the instrument easy to carry and to fit comfortably in your hand. The rugged and drip proof case assures long life and reliable operation in the harshest industrial environments.
While conventional oscilloscopes can only make measurements referenced to power line ground, the Fluke 123 ScopeMeter make floating measurements so there is no risk of an accidental ground short circuit when making a connection. The ScopeMeter 123 and the included shielded test leads are safety certified for measurements on CAT III 600 V industrial power systems. And using the VPS40 probe, measurements up to 1000 V CAT II re fully supported! Via the optically isolated RS-232 or OC4USB interface, the ScopeMeter 123 can be safely connected to a printer for direct print-out or to a PC for later analysis and documentation using FlukeView software.
Connect-and-View captures even the most complex motor drive signals Scope users know how difficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke's unique Connect-and-View recognizes signal patterns, and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal - including motor drive and control signals - without you touching a button. Signal changes are instantly recognized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test points in quick succession.
Cursors and zoom help you analyze the captured TrendPlot The toughest faults to find are those that happen only once in a while: intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. You may not be around to see it - your Fluke ScopeMeter will. In this "paperless recorder" mode, you can plot the minimum and maximum peak values and average over time - up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase - with time and date stamp -to help lead you to the cause of those faults quickly.
Environmental Specifications Operating Temperature
0 °C to 50 °C Storage Temperature
-20 °C to +60 °C Operating Altitude
Safety Specifications Electrical Safety
600V CAT III (EN61010-1)
Mechanical & General Specifications Size
232 x 115 x 50 mm Weight
1.2 kg Warranty
3 years parts and labor (one year on accessories) Battery Life
7 hrs using NiMH RS-232 Interface
Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC
Click on a category to view a selection of the most popular accessories compatible with the Fluke 124 Industrial ScopeMeter.
adam719 - Friday, June 8th 2012
I first decided to purchase another brand costing half as much despite the fact that my other portable equipment is all FLUKE. What a mistake... it was difficult to use and broke within the FIRST WEEK! I sent it back and went with the 123 ScopeMeter. It was like coming home after being away. In summation, you get what you pay for.VERY HAPPY CUSTOMER!!
Recommendation: Yes, I would recommend this product.