Fluke 87V Industrial True RMS Multimeter

Model: 87-5

True RMS, Analog Bargraph, Digital Display, Backlight, 1000V AC/DC, Measure up to 10A, 20A for up to 30 seconds.

Add In House NIST Traceable Calibration to your 87-5

Clear selected options


$386.99 USD

was $429.99

10+ in Stock




Customer Reviews


Fluke 87V Key Features:

  • True-rms ac voltage and current for accurate measurements on non linear signals
  • Selectable filter for accurate voltage and frequency measurements on motor drives
  • 0.05 % dc accuracy
  • 4-1/2 digit mode for precise measurements
  • Built-in thermometer lets you carry one less tool
  • Large display digits and two-level bright white backlight for increased visibility
  • 10,000 µF capacitance range for components and motor caps
  • Peak capture to record transients as fast as 250 µs
  • Measure up to 1000 V ac and dc
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Auto and manual ranging for maximum flexibility
  • Analog bargraph
  • Resistance, continuity and diode test
  • Frequency to 200 kHz and % duty cycle
  • Min/Max and average recording to capture variations automatically
  • Relative mode to remove test lead resistance from low ohms measurements
  • Improved sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • Limited lifetime warranty
  • Removable holster with built in test lead and probe storage
  • Cat IV 600 V and Cat III 1000 V electrical safety ratings
  • Basic test leads and alligator clips
  • Bead type thermocouple temperature probe

Correctly measure pulse-width modulated motor drive signals

Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.

  • Unique function for accurate measurements of noisy pulse-width modulated AC voltage.
  • Measures correctly at the ASD and at the motor terminals
  • Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
  • Measure AC current with an optional current clamp accessory
  • Compare reading from the 87V with the display on the ASD
  • Special shielding blocks high frequency, high-energy noise generated by large drive systems

The Fluke 87V Industrial True-RMS Multimeter

The Fluke 87V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. The 87V operates very similar to the classic 87, but with more problem-solving power, safety, convenience and impact protection.
With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals.

Features for maximum productivity:

  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)
  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V)
  • Large digit display with bright, two-level backlight makes the 80 Series V significantly easier to read than older models

Electrical Safety:

All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

For a greater value see these Fluke 87V Kits and Bundles:

Fluke 87V Key Features:

  • True-rms ac voltage and current for accurate measurements on non linear signals
  • Selectable filter for accurate voltage and frequency measurements on motor drives
  • 0.05 % dc accuracy
  • 4-1/2 digit mode for precise measurements
  • Built-in thermometer lets you carry one less tool
  • Large display digits and two-level bright white backlight for increased visibility
  • 10,000 µF capacitance range for components and motor caps
  • Peak capture to record transients as fast as 250 µs
  • Measure up to 1000 V ac and dc
  • Measure up to 10 A, 20 A for up to 30 seconds
  • Auto and manual ranging for maximum flexibility
  • Analog bargraph
  • Resistance, continuity and diode test
  • Frequency to 200 kHz and % duty cycle
  • Min/Max and average recording to capture variations automatically
  • Relative mode to remove test lead resistance from low ohms measurements
  • Improved sleep mode for long battery life
  • Access door for fast battery changes without breaking the calibration seal
  • Limited lifetime warranty
  • Removable holster with built in test lead and probe storage
  • Cat IV 600 V and Cat III 1000 V electrical safety ratings
  • Basic test leads and alligator clips
  • Bead type thermocouple temperature probe

Correctly measure pulse-width modulated motor drive signals

Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.

  • Unique function for accurate measurements of noisy pulse-width modulated AC voltage.
  • Measures correctly at the ASD and at the motor terminals
  • Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
  • Measure AC current with an optional current clamp accessory
  • Compare reading from the 87V with the display on the ASD
  • Special shielding blocks high frequency, high-energy noise generated by large drive systems
Specifications
Voltage DC
Maximum Voltage1000V
Accuracy ±(0.05%+1)
Maximum Resolution10 µV
Voltage AC
Maximum Voltage1000V
Accuracy±(0.7%+2) True RMS
AC Bandwidth20kHz*

*with low pass filter; 3db @ 1kHz
Maximum Resolution0.1 mV
Current DC
Maximum Amps10A (20 A for 30 seconds maximum)
Amps Accuracy±(0.2%+2)
Maximum Resolution0.01 µA
Current AC
Maximum Amps10A (20 A for 30 seconds maximum)
Amps Accuracy±(1.0%+2) True RMS
Maximum Resolution0.1 µA
Resistance
Maximum Resistance50 MΩ
Accuracy±(0.2%+1)
Maximum Resolution0.1Ω
Capacitance
Maximum Capacitance9,999 µF
Accuracy±(1%+2)
Maximum Resolution0.01 nF
Frequency
Maximum Frequency200 kHz
Accuracy±(0.005%+1)
Maximum Resolution0.01 Hz
Duty Cycle
Maximum Duty Cycle99.9%
Accuracy±(0.2% per khz +0.1%)
Maximum Resolution0.1%
Temperature Measurement
-200.0°C - 1090°C
-328.0°F - 1994.0°F
excluding probe
80 BK Temperature Probe

-40.0°C - 260°C

-40.0°F - 500°F, 2.2°C or 2% whichever is greater
Conductance
Maximum Conductance60.00 nS
Accuracy±(1.0%+10)
Maximum Resolution0.01 nS
Diode

Range 3 V
Resolution1 mV
Accuracy± (2 % + 1)
Duty Cycle Range
AccuracyWithin ± (0.2% per kHz + 0.1 %)

Environmental Specifications
Operating Temperature

-20°C to +55°C
Storage Temperature

-40°C to +60°C
Humidity (Without Condensation)

0% - 90% (0°C - 35°C)

0% - 70% (35°C - 55°C)
Operating Altitude

2000 m

Safety Specifications
Overvoltage category

EN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency Approvals

UL, CSA, TÜV, VDE listed

Mechanical & General Specifications
Size

201 x 98 x 52 mm (with holster)
Weight

355 g
Weigh With Holster and Flex-Stand

624 g
Display
Digital6000 counts updates 4/sec.

(Model 87 also has 19,999 counts in high-resolution mode.)
Analog32 segments, updates 40/sec.
Frequency19,999 counts, updates 3/sec at > 10 Hz.
Warranty

Lifetime
Battery Life
Alkaline~400 hours typical, without backlight
Shock

1 Meter drop per IEC 61010-1:2001
Vibration

Per MIL-PRF-28800 for a Class 2 instrument
Click here for complete specifications on the Fluke 87-5

  • Fluke TL75 test leads
  • Fluke AC175 Alligator Clips
  • Holster
  • 9V battery (installed)
  • Getting Started Manual
  • CD with detailed manual
  • Fluke 80BK temperature probe

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 87V Industrial True RMS Multimeter.

Fluke TLK291 fused test probe set TLK291 4630
For use with Fluke multimeters and test leads.
$79.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set TP1 2040
For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$19.99 USD

Learn More

Fluke TL26A 60 in. Telecom 5-Way Test Lead Set TL26A 1999
60" (1.5m), silicone-insulated leads, useable from -80 to 150°C (-112 to 302°F). Rated for 30V, 10A. One red, one black.
$59.99 USD

Learn More

Fluke TL930 Patch Cord Set (60 cm) TL930 2024
30V RMS or 60V DC, and 15A.
$19.99 USD

Learn More

Fluke 80K-40 High Voltage Probe 80K-40 1367
High Voltage Probe for Digital Multimeters, 40kV DC, 28kV AC.
$197.99 USD

was $219.99


Learn More

Fluke TL932 Patch Cord Set 36" (90 cm) TL932 2025
36" (90 cm) (30V rms or 60V DC, 15A).
$19.99 USD

Learn More

$143.99 USD

was $159.99


Learn More

Fluke TP2 Slim Reach Test Probe Set TP2 2044
For probing closely spaced or recessed terminals compatible with AC72.
$19.99 USD

Learn More

Fluke TL40 Retractable Tip Test Lead Set TL40 2004
Adjustable to desired length from 0 to 76mm.
$44.99 USD

Learn More

Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit TL225 2646
Voltage Adapter Test Lead Kit makes sure the meter has a low input impedance that eliminates stray voltages and indicates real voltage.
$107.99 USD

was $119.99


Learn More

Fluke TL220 Suregrip Industrial Test Lead Set TL220 1990
Includes Fluke AC220, Fluke TP220, and Fluke TL224.
$79.99 USD

Learn More

Fluke 80K-6 KV High Voltage Probe 80K-6 1368
High Voltage Probe for Digital Multimeters, 6kV DC/AC.
$116.99 USD

was $129.99


Learn More

Fluke TL935 Patch Cord Kit TL935 2026
Kit of 60, 90, and 120cm cords. 30V RMS or 60V DC, and 15A.
$49.99 USD

Learn More

$143.99 USD

was $159.99


Learn More

Fluke TP220 SureGrip Industrial Test Probes TP220 2045
For use with TL222 and TL224 test leads provides reliable contact.
$19.99 USD

Learn More

Fluke TL71 Premum DMM Test Lead Set TL71 2005
Comfort grip probes with silicone insulated, right-angle test leads.
$29.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More

Fluke TL940 Mini-Hook Test Lead Set TL940 2027
30V RMS or 60V DC, and 15A.
$24.99 USD

Learn More

Fluke TL221 Suregrip Silicone Test Lead Extension Kit TL221 1992
Test Lead Extension Kit designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP4 Slim Reach Test Probe Set TP4 2049
Designed to fit securely into IEC electrical wall outlets.
$19.99 USD

Learn More

Fluke TL75 Hard Point Test Lead Set TL75 2007
Comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs.
$24.99 USD

Learn More

Fluke AC280 SureGrip Hook Clips AC280 1401
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$34.99 USD

Learn More

Fluke TL950 Mini-Pincer Test Lead Set TL950 2028
30V RMS or 60V DC, and 15A.
$44.99 USD

Learn More

Fluke TL222 SureGrip Silicone Insulated Test Leads TL222 1993
Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More


Fluke TL76 All-in-one Test Lead Set TL76 2008
2mm/4mm 1.5 meter long silicone test leads with right angle shrouded banana plug.
$34.99 USD

Learn More

Fluke AC283 SureGrip Pincer Clips AC283 1402
Flexible, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More

Fluke L210 Probe Light Kit L210 1835
L200 Probe Light and Probe Extenders.
$44.99 USD

Learn More

Fluke TL960 Micro-Hook Test Lead Set TL960 2029
30V RMS or 60V DC, and 15A.
$29.99 USD

Learn More

Fluke TL223 Suregrip Electrical Test Lead Set TL223 1994
includes Fluke AC220, TP1, TL224.
$79.99 USD

Learn More


Fluke TL80A Basic Electronic Test Lead Set TL80A 2009
1 meter long silicone test lead set, alligator clip and probe tip extender in a soft carrying case.
$79.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More


Fluke TL970 Hook and Pincer Kit TL970 2030
Kit includes TL940 Mini-Hook Test Lead Set, TL950 Mini-Pincer Test Lead Set, and TL960 Micro-Hook Test Lead Set.
$89.99 USD

Learn More

Fluke TL224 SureGrip Silicone Insulated Test Leads TL224 1995
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More


Fluke TL81A Deluxe Electronic Test Lead Set TL81A 2010
Test Lead Set in quad-fold nylon pouch works with DMMs that accept safety shrouded, standard diameter banana connectors.
$134.99 USD

was $149.99


Learn More

Fluke AC87 Heavy Duty Bus Bar Clip Set AC87 1411
Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More

Fluke AC120 Alligator Clips AC120 1534
Set of 3.
$39.99 USD

Learn More

Fluke TLK225 SureGrip Master Accessory Kit TLK-225 2032
Kit includes Fluke AC220, AC280, AC283, AC285, TP175, and TL224 all in a 6-Pocket Storage Pouch.
$143.99 USD

was $159.99


Learn More

Fluke TL238 Test Lead Set for High Energy Environment TL238 1996
Designed for high energy environments. Kit includes Fluke TP238, TP280, TL224.
$79.99 USD

Learn More


Fluke TL910 Electronic Test Probe Set TL910 2012
Comfortable and allows accessibility to hard to reach test points.
$69.99 USD

Learn More

Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89 1412
Insulated, Shrouded Banana Jack. One Red.
$44.99 USD

Learn More

$224.99 USD

was $249.99


Learn More

Fluke 80PK-EXT Extension Wire Kit 80PK-EXT 1383
Type K.
$59.99 USD

Learn More

Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22 1373
Type K Immersion Temperature Probe designed with a superior gripping surface made from thermoplastic rubber.
$99.99 USD

Learn More

Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24 1374
K-Type, Air and Gas Temperature Probe.
$107.99 USD

was $119.99


Learn More

Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25 1375
K-Type, Piercing Temperature Probe, SureGrip.
$107.99 USD

was $119.99


Learn More


$107.99 USD

was $119.99


Learn More

$29.99 USD

Learn More

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27 1377
K-Type, Industrial Surface Temperature Probe.
$296.99 USD

was $329.99


Learn More

Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8 1381
Pipe Clamp Temperature Probe.
$161.99 USD

was $179.99


Learn More

Fluke i400S AC Current Clamp I400S 1825
400A AC current clamp with BNC terminated lead.
$260.99 USD

was $289.99


Learn More

Fluke i200s AC Current Clamp I200S 1555
200A AC current clamp with BNC terminated lead.
$224.99 USD

was $249.99


Learn More

Fluke i410 AC/DC Current Clamp I410 1826
1 to 400 Amps DC/1 to 400 Amps AC. For use with digital multimeters, scope meters and power quality analyzers.
$242.99 USD

was $269.99


Learn More

Fluke i410-KIT AC/DC Current Clamp with Carrry Case I410-KIT 1827
Included with kit: Fluke i410 (1-400A AC RMS, 1-400A DC Current Clamp) and a Zippered vinyl carry case with moveable divider.
$278.99 USD

was $309.99


Learn More

Fluke i400 AC Current Clamp I400 3542
1 Amp to 400 Amps for use with DMMs.
$143.99 USD

was $159.99


Learn More

Fluke i1000s AC Current Clamp I1000S 1820
1000A AC Current Clamp with BNC terminated lead.
$517.49 USD

was $574.99


Learn More

Fluke i1010 AC/DC Current Clamp I1010 1821
For use with Digital Multimeters and Calibrators. Features a Current Range of 1A to 600A AC and 1A to 1000A DC.
$382.49 USD

was $424.99


Learn More

Fluke i3000s Flex-24 Flexible AC Current Probe, 24 inch length I3000S-FLEX-24 4624
Flexible 24" 3000A AC current probe with BNC terminated lead.
$472.49 USD

was $524.99


Learn More

Fluke i1010-KIT Current Clamp Kit I1010-KIT 1822
Includes carrying case.
$404.99 USD

was $449.99


Learn More

Fluke i3000s Flex-36 AC Current Clamp, 36" I3000S-FLEX-36 4625
36" length, 3000A max, switchable current range for 30A, 300A or 3000A using a 1mA/A, 10mV/A or 100mV/A output and BNC connector.
$562.49 USD

was $624.99


Learn More

Fluke i2000 FLEX Flexible AC Current Probe I2000-FLEX 1823
2000A flexible AC current transformer for Fluke power quality analyzers.
$359.99 USD

was $399.99


Learn More

Fluke i200 AC Current Clamp I200 1554
Fuke i200 AC Current Clamp 1 A to 200A compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
$143.99 USD

was $159.99


Learn More

Fluke C100 Hard Sided Carrying Case C100 1428
Carrying Case for all handheld multimeters.
$59.99 USD

Learn More



Fluke C25 Large Soft Case C25 1437
For use with Fluke Multimeters.
$39.99 USD

Learn More



Fluke C35 Soft Carrying Case C35 4617
For use with Fluke Multimeters.
$24.99 USD

Learn More


Fluke C550 Premium Tool Bag C550 1447
Tool Bag with steel reinforced frame.
$99.99 USD

Learn More


$427.49 USD

was $474.99


Learn More

Fluke FlukeView Forms Software with cable (FVF-SC2) FVF-SC2 1801
For use with the Fluke 180 Series, 789, 1550B, 1550C, 1555, 53-2-B, 54-2-B and 1653.
$224.99 USD

was $249.99


Learn More

Fluke L200 Probe Light L200 1831
Easily attaches to any Fluke test probe.
$29.99 USD

Learn More

Fluke 80AK-A Thermocouple Adapter 80AK-A 1361
To be used with DMMs and Temperature Probes with K-Type Connector
$29.99 USD

Learn More


Ask a question about the Fluke 87V Industrial True RMS Multimeter:

comments powered by Disqus


Fluke 87V Industrial True RMS Multimeter Reviews:

Flukester - Tuesday, June 19th 2012

Solid and Precise

If you don't lose your tools, buy it once and get a FLUKE.Clear lighted display, durable and trustworthy.I got the TL175 adjustable leads as well, they are great.

Recommendation: Yes, I would recommend this product.


JohnB - Friday, June 15th 2012

Very Versatile!

A feature packed meter , A must for trouble technicians and troubleshooters. One meter replaced 5. Frequency and amp measured with the same clamp. I use this meter daily. Cant say enough great about itGreat Battery lifeUseful settingsRuggedVery Accurate

Recommendation: Yes, I would recommend this product.


Chuck86 - Friday, June 15th 2012

AAAA+ meter

If I only needed one meter, this is the one meter I would rely on. From it's quick response to it's multi applications it's THE meter to have. Does everything I could ask for in a meter of this size and cost. Use mine throughout the day to calibrate drives, to checking temps. It does it all. Not cumbersome to tote around. Lots of thought was put into this model.

Recommendation: Yes, I would recommend this product.


EnergyKing - Thursday, June 14th 2012

Loaded with the features I need.

An overall rugged and dependable DMM. Accuracy is unsurpassed and the 87 Series V is the flagship of all of my fluke DMM's.

Recommendation: Yes, I would recommend this product.


RTS88 - Wednesday, June 13th 2012

Rugged, accurate, and easy to use

I have had this product over a year working in the traffic signal industry and it has taken it's share of abuse and still working like a charm. The large digital display makes it easy to read at a distance.

Recommendation: Yes, I would recommend this product.


Lasso - Saturday, June 9th 2012

A rugged, dependable, and accurate meter.

The Model 87V was purchased to measure AC voltage for audio, where the measurements above 1 KHz had always been suspect with an older meter I had on hand. Due to the Model 87V's bandwidth out to 20 KHz, I am now able to reliably measure loudspeaker sensitivity using the multimeter in conjunction with a SPL calibrated microphone. This was previously a problem with tweeters since most of their output is above 1KHz.

Recommendation: Yes, I would recommend this product.


JDAUTO - Friday, June 8th 2012

DMM 87 V

I have use this meter for over a year now and it is definitely professional grade. The accuracy of these meters and the robust manufacturing that goes into these meters is second to none. I have used these meters on the race team in college, as an engineer in the field and on todays highly electronic automobiles. the uses for this meter are endless. This is a must for anyone diagnosing and performing any electrical work on anything.

Recommendation: Yes, I would recommend this product.


Chris - Friday, June 8th 2012

The best for the money.

I have had my 87V for a few months now and is by far one of the best meters I've owned. I am a Technical Supervisor for a small electronics mfg co and I purchase Fluke products whenever the need arises. Fluke products are by far the best on the market.

Recommendation: Yes, I would recommend this product.


controlman1966 - Friday, June 8th 2012

A must have for the service tech

This meter is a must have for a service tec in the eletrical field. this meter is ruged and durabile meter and does everthing that you need to do in the field on the go.

Recommendation: Yes, I would recommend this product.


drew4040 - Thursday, June 7th 2012

Best DMM ever

I've had the 85 for only a year now, and it isn't the industry standard for nothing! On every count this thing beats the quoted specs by a mile. It is built like a tank, and for that I am greatful because I have used this in some nasty places. I feel like I am practically married to my 85, I use it so much. It always works when I need it.

Recommendation: Yes, I would recommend this product.


CorrosionGuy - Thursday, June 7th 2012

Fluke 87 V Fits the bill

I use this DMM specifically for Cathodic Protection testing, troubleshooting, and training. This versatile test instrument is perfect for demanding and rugged use, and stands up to most field environments, from CP test readings, to troubleshooting CP rectifier components, to investigating stray dynamic AC and DC power on gas distribution and transmission pipelines.

Recommendation: Yes, I would recommend this product.


LarryV - Thursday, June 7th 2012

Most accurate and dependable!!!

I would definately recommend this meter the Fluke 87V true rms. I have been in the electrical indusrty for approx 30 yrs and Fluke has never let me down. This meter is very user friendly. it has a crystal clear dimmable led display which is very helpful in the field. Most importantly it is the most accurate and reliable meter I have ever used in my 30 yrs in the trade. This is my second Fluke 87 meter over the yrs and I would not hesitate to buy a third meter.. Another great feaure of my fluke meter is how durable it is. I have dropped my meter quite a few times and a few times off my ladder, I picked it up and it was in perfect working order....

Recommendation: Yes, I would recommend this product.


slimjim09 - Thursday, June 7th 2012

Excellent Digital Multi Meter

I own a small computer business & work on some electronics. This meter does all I need & more. It is well built, it has out lasted other brand meters I have used, & the info I get from this meter is very dependable. Other meters just don't measure up to the Fluke. You may pay a little more for them, but yo get what you pay for. Highly recommend.

Recommendation: Yes, I would recommend this product.


hvac305 - Wednesday, May 30th 2012

Still the gold standard.

I've been relying on a trusty Fluke 79 for 15 years. It was finally time to upgrade and I picked up a Fluke 87. The 87 is a pleasure to use. The selector knob still has that Fluke "snick"". The meter has a solid feel. The buttons are easy to operate. I'll be using this meter for at least the next 15 years!"

Recommendation: Yes, I would recommend this product.


liljohnl - Monday, May 28th 2012

very acurite and reliable easy to read with back lite

this is my 4th meter from fuke and as always it delivers accurite readings i dont have to second guess what the unit showes me i trust literly with my life

Recommendation: Yes, I would recommend this product.