Fluke 789 Process Meter

Model: 789

A full-featured loop calibrator and 1000V digital multimeter combined into a single handheld unit.

Add In House NIST Traceable Calibration to your 789

Clear selected options


$899.99 USD

was $999.99

6 in Stock



Fluke Connect is the best way to stay in contact with your team without leaving the field.



 


  • 24 V Loop power supply
  • Double-sized, dual display
  • Enhanced backlight with 2 brightness settings
  • 20mA drive into 1200 ohms
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 0% and 100 % mA Span Check buttons to toggle between 4 and 20 mA
  • Externally accessible fuses for easy replacement
  • Infrared I/O serial port compatible with FlukeView Forms software
  • Precision 1000 V, 440 mA True-RMS digital Multimeter
  • 0.1% dc voltage accuracy
  • 0.05% dc current accuracy
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • Simultaneous mA and % of scale readout
  • 20 mA DC current source / loop calibrator / simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Improved battery power with four AA batteries

Safety Conformance

Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.


The Fluke 789 Offers

Safety rated multimeters with mA source. Now process technicians can do a lot more while carrying a lot less. The ultimate loop calibration multimeter - the Fluke 789 ProcessMeter. The Fluke 789 ProcessMeter was the first tool to combine a loop calibrator with a DMM to give process technicians double the power in one tool.

Features

  • 0.05% DC current accuracy
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • Simultaneous mA and % of scale readout
  • 20 mA DC current source / loop calibrator / simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes

Fluke 789 Specifications

Current Measurement
Range 0 to 1A AC or DC
Resolution 1mA
Accuracy 0.2% + 2 LSD (DC)
Range 0 to 30mA
Resolution 0.001 mA
Accuracy 0.05% + 2 lSD
Current Sourcing
Range 0 to 20mA or 4 to 20mA
Resolution 0.05% of span
Drive Capability 24V Compliance or 1200Ω at 20mA
Voltage Measurement
Range 0 to 1000V AC (True-RMS) or DC
Resolution 0.1mV to 1.0V
Accuracy 0.1% rdg + 1 LSD (V DC)
Electrical Specifications
Frequency To 19.999kHz, 0.005% + 1 LSD
Continuity Beeps for resistance < 100Ω
Resistance Measurement To 40MΩ, 0.2% + 1 LSD
Diode Test 2.0V shoes diode voltage drop
Click here for complete specifications on the Fluke 789

What's included with the Fluke 789

  • 789 Process Meter
  • AC175 Alligator Clips
  • 4 x AA 1.5 V alkaline batteries (installed)
  • TL71 safety-designed test lead set
This product features Fluke Connect Technology

See it. Save it. Share it. All the facts, right in the field.

Fluke engineers have delivered an innovative mobile platform and tool that helps solve everyday problems, allowing you to instantly document measurements, retrieve historical data, and share live measurements with your team. All handled by the Android™ or iOS smart phone you already carry.

Fluke Connect with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is works with over 20 different Fluke products - the largest suite of connected test tools in the world.

Make the best decisions faster than ever before by viewing temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity.


Fluke Connect Features:

  • TrendIt™ Graphs: Use graphing to show changes in measurements, allowing you to graph and show problems instantly.
  • EquipmentLog™ History: Access equipment history building a database of equipment health and baselines with cloud backup.
  • ShareLive™ Video Calls: Save, collaborate and share measurements instantly with your team anytime, from anywhere.
  • AutoRecord™ Measurements: Instantly save measurements to your phone with Cloud backup.
  • Fluke Cloud™ Storage: Securely access equipment records anywhere, anytime.

Fluke Connect Benefits:

  • Maximize uptime
  • Minimize maintenance costs
  • Better assessments with accurate records
  • Higher efficiency with less walking around; no notebook and excel needed
  • Share troubleshooting knowledge live
  • Create and share helpful content in the field
  • Access to Fluke digital product manuals means no need to carry manuals in the field
  • Keep organized manually entered measurements

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 789 Process Meter.

Fluke V3001 FC Wireless DC Voltage Module V3001FC 19920
The V3001 FC Wireless Voltage Module measures DC voltage and relays measurements to any Fluke Connect master units
$199.99 USD

Learn More

Fluke 3000 FC Digital Multimeter with Fluke Connect 3000 FC 19913
The new Fluke 3000 FC wireless multimeter is the center of your Fluke Connect network
$269.99 USD

was $299.99


Learn More

Fluke A3000 FC Wireless AC Current Clamp Module A3000FC 19916
The A3000 FC Wireless Current Clamp Meter is a fully functional True-RMS current clamp meter that wirelessly relays AC measurements to any Fluke Connect system.
$179.99 USD

was $199.99


Learn More

Fluke A3001 FC Wireless iFlex AC Current Module A3001FC 19917
The A3001 FC Wireless iFlex AC Current Module that wirelessly relays measurements to any Fluke Connect system.
$224.99 USD

was $249.99


Learn More

Fluke A3002 FC Wireless AC/DC Current Module A3002FC 19918
The A3002 FC Wireless AC/DC Current Module is designed to relay measurements from the i410 or i1010 clamps to any Fluke Connect system.
$116.99 USD

was $129.99


Learn More

Fluke T3000 FC Wireless K-Type Temperature Module T3000-FC 19921
The Fluke T3000 FC is a versatile K-Type thermocouple thermometer that wirelessly relays measurements to any Fluke Connect master units.
$179.99 USD

was $199.99


Learn More

Fluke V3000 FC Wireless True-rms AC Voltage Module V3000FC 19919
The V3000 FC Wireless Voltage Module measures true-rms AC voltage and relays measurements to any Fluke Connect master units
$179.99 USD

was $199.99


Learn More

Fluke TL940 Mini-Hook Test Lead Set TL940 2027
30V RMS or 60V DC, and 15A.
$24.99 USD

Learn More


Fluke TL80A Basic Electronic Test Lead Set TL80A 2009
1 meter long silicone test lead set, alligator clip and probe tip extender in a soft carrying case.
$79.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More

Fluke TL224 SureGrip Silicone Insulated Test Leads TL224 1995
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP 38 Slim Reach Test Probe Set TP38 2048
For probing closely spaced or recessed terminals.
$19.99 USD

Learn More

Fluke AC120 Alligator Clips AC120 1534
Set of 3.
$39.99 USD

Learn More

Fluke TL27 Heavy Duty Test Lead Set TL27 2000
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.
$34.99 USD

Learn More

Fluke TL950 Mini-Pincer Test Lead Set TL950 2028
30V RMS or 60V DC, and 15A.
$44.99 USD

Learn More

Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit TL225 2646
Voltage Adapter Test Lead Kit makes sure the meter has a low input impedance that eliminates stray voltages and indicates real voltage.
$107.99 USD

was $119.99


Learn More

Fluke TL81A Deluxe Electronic Test Lead Set TL81A 2010
Test Lead Set in quad-fold nylon pouch works with DMMs that accept safety shrouded, standard diameter banana connectors.
$134.99 USD

was $149.99


Learn More

Fluke AC280 SureGrip Hook Clips AC280 1401
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$34.99 USD

Learn More

Fluke TL238 Test Lead Set for High Energy Environment TL238 1996
Designed for high energy environments. Kit includes Fluke TP238, TP280, TL224.
$79.99 USD

Learn More

Fluke TP4 Slim Reach Test Probe Set TP4 2049
Designed to fit securely into IEC electrical wall outlets.
$19.99 USD

Learn More

Fluke TL28A Automotive Test Lead Set TL28A 2001
Heat and cold resistant.
$49.99 USD

Learn More

Fluke TLK291 fused test probe set TLK291 4630
For use with Fluke multimeters and test leads.
$79.99 USD

Learn More

Fluke TL960 Micro-Hook Test Lead Set TL960 2029
30V RMS or 60V DC, and 15A.
$29.99 USD

Learn More

Fluke Camo-C25 Camouflage Carrying Case for Fluke Multimeters CAMO-C25 52482
Zippered carrying case with padding and inside pocket. Dimensions: 218 x 128 x 64mm (8.6 x 5 x 2.52").
$49.99 USD

Learn More

Fluke TL910 Electronic Test Probe Set TL910 2012
Comfortable and allows accessibility to hard to reach test points.
$69.99 USD

Learn More

Fluke AC283 SureGrip Pincer Clips AC283 1402
Flexible, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More

Fluke TL26A 60 in. Telecom 5-Way Test Lead Set TL26A 1999
60" (1.5m), silicone-insulated leads, useable from -80 to 150°C (-112 to 302°F). Rated for 30V, 10A. One red, one black.
$59.99 USD

Learn More


Fluke TL40 Retractable Tip Test Lead Set TL40 2004
Adjustable to desired length from 0 to 76mm.
$44.99 USD

Learn More

$143.99 USD

was $159.99


Learn More

Fluke TL220 Suregrip Industrial Test Lead Set TL220 1990
Includes Fluke AC220, Fluke TP220, and Fluke TL224.
$79.99 USD

Learn More

Fluke TL970 Hook and Pincer Kit TL970 2030
Kit includes TL940 Mini-Hook Test Lead Set, TL950 Mini-Pincer Test Lead Set, and TL960 Micro-Hook Test Lead Set.
$89.99 USD

Learn More

Fluke CXT80 CXT80 8796
Rugged Pelican Hard Case for the Fluke 80/180 Series.
$179.99 USD

was $199.99


Learn More

Fluke TL930 Patch Cord Set (60 cm) TL930 2024
30V RMS or 60V DC, and 15A.
$19.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More


Fluke TL71 Premum DMM Test Lead Set TL71 2005
Comfort grip probes with silicone insulated, right-angle test leads.
$29.99 USD

Learn More

Fluke TL221 Suregrip Silicone Test Lead Extension Kit TL221 1992
Test Lead Extension Kit designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set TP1 2040
For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$19.99 USD

Learn More

$224.99 USD

was $249.99


Learn More

Fluke TL932 Patch Cord Set 36" (90 cm) TL932 2025
36" (90 cm) (30V rms or 60V DC, 15A).
$19.99 USD

Learn More

Fluke AC87 Heavy Duty Bus Bar Clip Set AC87 1411
Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More


Fluke TL75 Hard Point Test Lead Set TL75 2007
Comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs.
$24.99 USD

Learn More

Fluke TL222 SureGrip Silicone Insulated Test Leads TL222 1993
Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP2 Slim Reach Test Probe Set TP2 2044
For probing closely spaced or recessed terminals compatible with AC72.
$19.99 USD

Learn More

Fluke 80K-40 High Voltage Probe 80K-40 1367
High Voltage Probe for Digital Multimeters, 40kV DC, 28kV AC.
$197.99 USD

was $219.99


Learn More

Fluke TL935 Patch Cord Kit TL935 2026
Kit of 60, 90, and 120cm cords. 30V RMS or 60V DC, and 15A.
$49.99 USD

Learn More

Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89 1412
Insulated, Shrouded Banana Jack. One Red.
$44.99 USD

Learn More


Fluke TL76 All-in-one Test Lead Set TL76 2008
2mm/4mm 1.5 meter long silicone test leads with right angle shrouded banana plug.
$34.99 USD

Learn More

Fluke TL223 Suregrip Electrical Test Lead Set TL223 1994
includes Fluke AC220, TP1, TL224.
$79.99 USD

Learn More

Fluke TP220 SureGrip Industrial Test Probes TP220 2045
For use with TL222 and TL224 test leads provides reliable contact.
$19.99 USD

Learn More

Fluke 80K-6 KV High Voltage Probe 80K-6 1368
High Voltage Probe for Digital Multimeters, 6kV DC/AC.
$116.99 USD

was $129.99


Learn More


Fluke C100 Hard Sided Carrying Case C100 1428
Carrying Case for all handheld multimeters.
$59.99 USD

Learn More

Fluke C550 Premium Tool Bag C550 1447
Tool Bag with steel reinforced frame.
$99.99 USD

Learn More



Fluke C25 Large Soft Case C25 1437
For use with Fluke Multimeters.
$39.99 USD

Learn More


Fluke C781 Meter Case C781 1452
Zippered with detachable pouch.
$69.99 USD

Learn More

$125.99 USD

was $139.99


Learn More

Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24 1374
K-Type, Air and Gas Temperature Probe.
$107.99 USD

was $119.99


Learn More

$107.99 USD

was $119.99


Learn More

Fluke 80PK-3A Surface Probe 80PK-3A 1378
Flat Surface Temperature Probe.
$143.99 USD

was $159.99


Learn More

$29.99 USD

Learn More

Fluke 80PK-EXT Extension Wire Kit 80PK-EXT 1383
Type K.
$59.99 USD

Learn More

$242.99 USD

was $269.99


Learn More

$134.99 USD

was $149.99


Learn More

Fluke i3000s Flex-36 AC Current Clamp, 36" I3000S-FLEX-36 4625
36" length, 3000A max, switchable current range for 30A, 300A or 3000A using a 1mA/A, 10mV/A or 100mV/A output and BNC connector.
$562.49 USD

was $624.99


Learn More

Fluke i1000s AC Current Clamp I1000S 1820
1000A AC Current Clamp with BNC terminated lead.
$517.49 USD

was $574.99


Learn More

Fluke i200 AC Current Clamp I200 1554
Fuke i200 AC Current Clamp 1 A to 200A compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
$143.99 USD

was $159.99


Learn More

Fluke i1010 AC/DC Current Clamp I1010 1821
For use with Digital Multimeters and Calibrators. Features a Current Range of 1A to 600A AC and 1A to 1000A DC.
$382.49 USD

was $424.99


Learn More

Fluke i200s AC Current Clamp I200S 1555
200A AC current clamp with BNC terminated lead.
$224.99 USD

was $249.99


Learn More

Fluke i400 AC Current Clamp I400 3542
1 Amp to 400 Amps for use with DMMs.
$143.99 USD

was $159.99


Learn More

Fluke i2000 FLEX Flexible AC Current Probe I2000-FLEX 1823
2000A flexible AC current transformer for Fluke power quality analyzers.
$359.99 USD

was $399.99


Learn More

Fluke i3000s AC Current Clamp I3000S 1556
3000A AC current clamp with BNC terminated lead
$562.49 USD

was $624.99


Learn More

Fluke i30 AC/DC Current Clamp I30 4618
Hall Effect technology. Features a Current range of 20A, a measuring range of ±30A, and an Output of 100 mV/A.
$449.99 USD

was $499.99


Learn More

Fluke i400S AC Current Clamp I400S 1825
400A AC current clamp with BNC terminated lead.
$260.99 USD

was $289.99


Learn More

Fluke i30s AC/DC Current Clamp I30S 4619
30A AC/DC current clamp with BNC terminated lead.
$562.49 USD

was $624.99


Learn More

Fluke i410 AC/DC Current Clamp I410 1826
1 to 400 Amps DC/1 to 400 Amps AC. For use with digital multimeters, scope meters and power quality analyzers.
$242.99 USD

was $269.99


Learn More

Fluke i3000s Flex-24 Flexible AC Current Probe, 24 inch length I3000S-FLEX-24 4624
Flexible 24" 3000A AC current probe with BNC terminated lead.
$472.49 USD

was $524.99


Learn More

$427.49 USD

was $474.99


Learn More

$247.46 USD

was $274.95


Learn More

Fluke ir3000 FC Connector FLK-IR3000FC 89428
Connect your Fluke test tool with the ir3000 FC connector and get all the benefits of the Fluke Connect™ app.
$99.99 USD

Learn More

$472.49 USD

was $524.99


Learn More

Fluke 771 Milliamp Process Clamp Meter 771 4149
Measures, tests, and troubleshoots 4-20 mA control signals without breaking the mA loop!
$539.99 USD

was $599.99


Learn More

Fluke FlukeView Forms Software with cable (FVF-SC2) FVF-SC2 1801
For use with the Fluke 180 Series, 789, 1550B, 1550C, 1555, 53-2-B, 54-2-B and 1653.
$224.99 USD

was $249.99


Learn More

Fluke pc3000 FC Adapter and Software PC3000-FC 19922
This USB adapter and software allows your PC or laptop to communicate with up to 10 Fluke Connect wireless devices.
$99.99 USD

Learn More


Ask a question about the Fluke 789 Process Meter:

comments powered by Disqus

Review the Fluke 789 Process Meter

" data-description="A full-featured loop calibrator and 1000V digital multimeter combined into a single handheld unit.">