Home » Fluke 787 Process Meter
Fluke 787 Process Meter
Yes! Available up to 
USD 
The Fluke 787
Process Meter was the first tool to combine a loop calibrator with a fully-functional 1000V True RMS digital multimeter to give process technicians double the power in one tool.
A maintenance and calibration tool that will be at home in every instrumentation technician's tool box, the Fluke 787 Process Meter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the Fluke 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution.
Put it all together and you have the ideal tool for troubleshooting and
calibrating current loop applications. So if you're tired of always
tracking down a calibrator, lugging around two tools and switching back
and forth, get the single best solution for doubling your power - the
Fluke 787 ProcessMeter.
The Bad:
The Bottom Line:
Full Review
- Auto (Touch) Hold
- Auto Power Off
- Auto Ramp
- Auto Ranging
- Auto Step
- Backlight
- Continuity
- Counts 30000
- Counts 30000 Counts
- Current AC AC Amps: 440mA
- Current DC DC Amps: 1A
- Diode Test
- Frequency 20
- Low Battery Indicator
- Low Input Impedance
- Manual Ranging
- Min/Max
- Min/Max Min/Max
- Relative Mode / Zero
- Resistance 40
- Source 4-20 mA
- True RMS
- Voltage AC AC Volts: 1000
- Voltage DC DC Volts: 1000
| Battery Life | 50 hours typical (measurement), 12 hours typical (sourcing 12 mA) |
| Battery Type | 4x AA |
| CAT III Rating | 1000V |
| Current AC Accuracy | 1.00% |
| Current DC Accuracy | 0.20% |
| Current mA DC Accuracy | 0.05% |
| Dimensions | 32 x 87 x 187 mm |
| Operating Temperature | -20 °C to +55 °C |
| Resistance Accuracy | 0.20% |
| Storage Temperature | -40 °C to +60 °C |
| Voltage AC Accuracy | 0.70% |
| Voltage DC Accuracy | 0.10% |
| Warranty | 3 Years |
| Weight | 369 g |
