Measure Volts DC, mA, RTDs, thermocouples, frequency, and ohms. Source or simulate Volts DC, mA, RTDs, thermocouples, frequency and ohms. Optional pressure modules to source/measure pressure.
Get the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
The Fluke 725's split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. Also the Fluke 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.
The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.
|Voltage Range||0 to 100mV; 0 to 10V (source)
0 to 30V (measure)
|Voltage Accuracy||0.02% rdg + 2 LSD|
|mA Range||0 to 24|
|mA Accuracy||0.02% rdg + 2 LSD|
|mV (TC terminals) Range||-10.00 to 75.00mV|
|mV (TC terminals) Accuracy||0.025% of range + 1 LSD|
|Resistance Range||15 to 3200Ω|
|Resistance Accuracy||0.10 to 1.0Ω|
|Frequency Range and Accuracy||2.0 to 1000.0 CPM: ±0.05%
1 to 1000Hz: ±0.05%
1.0 to 10.0kHz: ±0.25%
|Loop Supply Range||24V DC|
|Loop Supply Accuracy||10%|
Click on a category to view a selection of compatible accessories with the Fluke 725 Multi-function Process Calibrator.