Home » Fluke 718-100G Pressure Calibrator

Fluke 718-100G Pressure Calibrator

Fluke 718-100G Pressure Calibrator
Part Number:
FE 718-100US
In Stock?
Stock may be available
please call (877)766-5412 to confirm

Quantity

Price:
$2240.95 USD (change)

 

The complete solution to pressure calibration

Fluke 718-100G Pressure Calibrator is a compact, lightweight and easy to carry calibrator that delivers outstanding performance, durability and reliability.  The Fluke 718 Calibrator is EMI tolerant, dust and splash resistant and features a removable battery door for quick battery changes.

The Fluke 718 simultaneously measures pressure and mA and delivers 24 volt loop supply while measuring mA.  The Fluke 718 provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.

This new Pressure Calibrator presents cost-effective solutions for highly accurate pressure measurements over a wide range of temperatures.  Connect it with any of the Fluke pressure modules to address a wide variety of gage, differential, absolute, vacuum and dual (compound) pressure applications.

Measure:

  • Temperature from Thermocouple output
  • Loop Current
  • Pressure, 0.05% of full scale
  • Temperature from RTD output
  • Pressure to 10,000 psi/69 mPa using one of 29 Fluke pressure modules
  • Pressure, 0.05% of full scale with internal 100 psig sensor

What's Included:

  • Protective Yellow Holster with test lead storage
  • Instructions Sheet (14 languages)
  • Test Leads and Alligator Clip
  • Two 9V alkaline batteries
The Good:


The Bad:


The Bottom Line:

Full Review

  • Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
  • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
  • Error % calculation for quicker pass/fail decision making in the field
  • Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage
  • Min/Max/Hold to capture changing measurements
  • Switch test feature for quicker and more accurate pressure switch testing
  • Built-in pressure / vacuum hand pump, with vernier and bleed valve
  • New switch test function captures set, reset and dead band.
  • Pressure measurement to 0.05% of full span, using an internal pressure sensor
  • Pressure measurement to 10,000 PSI, 700 bar using any of the Fluke-700Pxx Pressure Modules
  • Current measurement with 0.025% accuracy and 0.001 mA resolution
  • Wide range of selectable measurement units for pressure
  • 24 volt loop power supply
  • Min-Max Hold and damp functions
  • 1/8 inch NPT female pressure fitting
  • Simple, push-button user interface
  • Compact size and weight
  • 3 year warranty
Measurement Accuracy
Pressure
Fluke 718 30G


Range:-12 to 30 PSI, -850 mbar to 2 bar (internal sensor) Over Pressure 3xFS
Resolution:0.001 psi, 0.1 mbar
Accuracy:0.05% full scale
Functions:Zero, Min, Max, Hold, Damp

Note: for use with non-corrosive gasses


Fluke 718 100G


Range:-12 to 100 PSI, -850 mbar to 7 bar (internal sensor) Over Pressure 3xFS
Resolution:0.01 psi, 1 mbar
Accuracy:0.05% of full scale
Functions:Zero, Min, Max, Hold, Damp

Note: for use with non-corrosive gasses


Fluke 718 series



via pressure module connector
Range:29 pressure modules, 0-1 inH20 to 10,000 psi, 2.5 mbar to 700 bar

Over pressure per pressure module specs
Resolution:Per pressure module specs
Accuracy:To 0.025% of full span, per pressure module specs
Functions:Zero, Min, Max, Hold, Damp

Note: media compatibility per pressure module specs,


Source Pressure, built in pump
Range:-12 PSI or -820 mbar to full scale



Supported Pressure Units; psi, in. H20 (4 °C), in. H20 (20 °C), cm H20 (4 °C),

cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm

Specifications
Loop Power
Range: 24 V dc
Accuracy: +/- 10%

Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V
Measure Accuracy:
Range:0 to 24 mA
Resolution:0.001 mA
Accuracy: 0.025% + 1 count
Display

LCD, 5 digit pressure and current simultaneous

Environmental Specifications
Operating temperature

-10ºC to 55ºC
Storage temperature

-40ºC to 60ºC
Humidity (Without Condensation)

95% (10ºC to 30ºC)

75% (30ºC to 40ºC)

45% (40ºC to 50ºC)

35% (50ºC to 55ºC)
Operating Altitude

3,000m max

Safety Specifications
Safety

CSA C22.2 No. 1010.1:1992
Maximum voltage

30V

Mechanical & General Specifications
Size

216 mm L x 94 mm W x 67 mm (8.5 in. L X 3.72 in. W X 2.61in.)
Weight

Approx. 992g (35 oz)
Warranty

3 years
Shock & Vibration

Random, 2G, 5-500 Hz

1m drop test
Battery type

Two 9V batteries, ANSI/NEDA 1604A or IEC 6LR61

Battery life: 4 to 20 hours, typical, depending on functions

Product brochures

Fluke 717 and 718 Pressure Calibrator Datasheet

Product training

Fluke Pressure Calibration with the Fluke 718 - New Design Protects On-Board Pump from Fluid Damage Application Note

Technical training

Fluke 718 Pressure Calibrators & Fluke 718 Calibrator Pump Technical Datasheet
Fluke Calibrators for Pressure Calibration Application Note
Fluke Process Calibrators - Education Goes Full Circle - Upgrading Refinery Instrumentation Application Note

Troubleshooting hints & tips

Fluke Pressure Calibrators with the Fluke 718 - New Design Protects On-board Pump from Fluid Damage Application Note

Product manuals

Fluke 718 Users Manual
No user reviews available.
Recommended Accessories
The Fluke 718-100G Pressure Calibrator has 50 recommended accessories.        Click to show all accessories


Cases
Name Price Quantity
Fluke C125 Soft Meter Case for Fluke Multimeters $37.95
Fluke C789 Meter & Accessory Case $110.95
Fluke C550 Premium Tool Bag $83.95
Fluke C510 Leather meter case $59.95
Cases
Name Price Quantity
Fluke C101 Hard Carrying Case $53.95
Pressure Modules
Name Price Quantity
Fluke PV350 Pressure Vacuum Module $395.95
Fluke 700P06 Gage Pressure Module (100 psi) $1,229.95
Fluke 700P31 Gage Pressure Module (10000 psi) $2,006.95
Fluke 700P29 Gage Pressure Module (3000 psi) $2,006.95
Fluke 700PV4 Vacuum Pressure Module (-15 psi) $1,418.95
Fluke 700PD7 Dual Pressure Module (-15/200 psi) $1,418.95
Fluke 700P08 Gage Pressure Module (1000 psi) $1,229.95
Fluke 700P30 Gage Pressure Module (5000 psi) $2,006.95
Fluke 700P07 Gage Pressure Module (500 psi) $1,229.95
Fluke 700P27 Gage Pressure Module (300 psi) $1,229.95
Fluke 700P04 Differential Pressure Module (15 psi) $1,229.95
Fluke 700PA5 Absolute Pressure Module (30 psi) $1,418.95
Fluke 700P03 Differential Pressure Module (5 psi) $1,229.95
Fluke 700P23 Differential Pressure Module Wet (5 psi) $1,229.95
Fluke 700P22 Differential Pressure Module Wet (1 psi) $1,229.95
Fluke 700PD3 Dual Pressure Module (±5 psi) $1,418.95
Fluke 700PD4 Dual Pressure Module (±15 psi) $1,418.95
Fluke 700PCK Pressure Calibration Kit $992.95
Fluke 700PA6 Absolute Pressure Module (100 psi) $1,418.95
Fluke 700PA3 Absolute Pressure Module (5 psi) $1,418.95
Fluke 700PRV-1 Pressure Relief Valve Kit $638.95
Fluke 700PD5 Dual Pressure Module (-15/30 psi) $1,418.95
Fluke 700PA4 Absolute Pressure Module (15 psi) $1,418.95
Fluke 700P00 Differential Pressure Module (1 in. H2O) $1,652.95
Fluke 700P09 Gage Pressure Module (1500 psi) $1,229.95
Fluke 700P02 Differential Pressure Module (1 psi) $1,229.95
Fluke 700P01 Differential Pressure Module (10 in. H2O) $1,229.95
Fluke 700P24 Differential Pressure Module Wet (15 psi) $1,229.95
Fluke 700PV3 Vacuum Pressure Module (-5 psi) $1,418.95
Fluke 700P05 Gage Pressure Module (30 psi) $1,229.95
Fluke 700PD2 Dual Pressure Module (±1 psi) $1,418.95
Fluke 700PD6 Dual Pressure Module (-15/100 psi) $1,418.95
Process Tools
Name Price Quantity
Fluke 700PTP-1 Pneumatic Test Pump $650.95
Fluke 700HTP-1 Hydraulic Test Pump $959.95
Fluke 700LTP Low-pressure Test Pump $692.95
Fluke 700PMP Pressure Pump $419.95
Temperature
Name Price Quantity
Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe $269.95
Test Leads
Name Price Quantity
Fluke TL71 Premum DMM Test Lead Set $22.95
Fluke TLK287 Electronics Master Test Lead Set $131.95
Fluke TL81A Deluxe Electronic Test Lead Set $128.95
Fluke TL223 Suregrip Electrical Test Lead Set $65.95
Fluke TL80A Basic Electronic Test Lead Set $59.95
Fluke TL238 Test Lead Set for High Energy Environment $63.95
Fluke TL76 All-in-one Test Lead Set $27.95
Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit $95.95

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: