Fluke 717-30G Pressure Calibrator

Model: 717-30G

Pressure Calibrator -12 to 30 PSI (-850 mbar to 2 bar, -85 to 206.84 kPa).

Add In House NIST Traceable Calibration to your Fluke 717-30G Pressure Calibrator

Clear selected options


$1,499.99 USD

6 to 7 Weeks




 


  • Measure pressure, 0.05% of full scale with internal sensor up to 5000 PSI/345 bar sensor (5000G model)
  • Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24V loop power
  • Measure pressure to 10,000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules
  • 1/8 NPT female pressure fitting
  • Compatible with non-corrosive Gases and liquids
  • Select eleven different engineering units
  • Zero, min, max, and hold functions
  • Calibrate P/I instruments with simultaneous pressure and current measurement
  • Pressure switch test function captures set, reset and Deadband values of a pressure switch
  • Error% calculation of mA measurements for quick pass-fail decisions
  • Long lasting battery life
  • Holster features test lead storage
  • Compatible with Toolpack magnetic hanging system
  • New switch test

Compact and professional pressure calibration tools.

Fluke 717-30G Pressure Calibrator is a compact, lightweight and easy to carry calibrator that delivers outstanding performance, durability and reliability. The Fluke 717 Calibrator is EMI tolerant, dust and splash resistant and features a removable battery door for quick battery changes.
The Fluke 717 simultaneously measures pressure and mA and delivers 24 volt loop supply while measuring mA.
This new Pressure Calibrator presents cost-effective solutions for highly accurate pressure measurements over a wide range of temperatures. Connect it with any of the Fluke pressure modules to address a wide variety of gage, differential, absolute, vacuum and dual (compound) pressure applications.

Measure:

  • Temperature from Thermocouple output
  • Loop Current
  • Pressure, 0.05% of full scale
  • Temperature from RTD output
  • Pressure to 10,000 psi/69 mPa using one of 29 Fluke pressure modules
  • Pressure, 0.05% of full scale with internal 30 psig sensor
Measurement Accuracy
Pressure
Fluke 717 30G


Measure Pressure(internal sensor)


Range-12 to 30 PSI, (-850 mbar to 2 bar )
Resolution0.001 PSI, 0.1 mbar
Accuracy0.05% full scale
FunctionsZero, Min, Max, Hold, Damp

Note: Gasses / liquids (non-corrosive), Over Pressure 3xFS


Fluke 717 Series


Measure Pressure(via pressure module connector using optional Pressure Modules)


Range29 pressure modules, 0-1 inH20 to 10,000 PSI, 2.5 mbar to 700 bar ranges

Over pressure per pressure module specs
ResolutionPer pressure module specs
Accuracy0.025% of full span, per pressure module specs
FunctionsZero, Min, Max, Hold, Damp

Note: Media compatibility per pressure module specs
Current
Range: 0 to 24 mA (-25% to 125%)
Resolution: 0.001 mA
Accuracy0.025% + 2 counts

Specifications
Loop Power
Range24 V dc
Accuracy: +/- 10%

Note: Drive; 20 mA into 1000 W for battery >6.8V; 700 W for battery 5.8 to 6.8 V
Display

Clear 5 digit LCD

Environmental Specifications
Operating temperature

-10 °C to 55 °C
Storage temperature

-40 °C to 60 °C
Humidity (Without Condensation)

95% (10 °C to 30 °C)

75% (30 °C to 40 °C)

45% (40 °C to 50 °C)

35% (50 °C to 55 °C)
Operating Altitude

3,000 m max

Safety Specifications
Safety

CSA C22.2 No. 1010.1:1992

Mechanical & General Specifications
Size

201 mm L x 98 mm W x 52 mm (7.93in. L x 3.86in. W X 2.06in.)
Weight

(21 oz.)

Approx. 330g
Warranty

3 years
Shock & Vibration

Random, 2G, 5-500 Hz

1m drop test
Battery type

Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline

Click here for complete specifications on the Fluke 717-30G

Accessories

Click on a category to view a selection of compatible accessories with the Fluke 717-30G Pressure Calibrator.

Fluke C100 Hard Sided Carrying Case C100 1428
Carrying Case for all handheld multimeters.
$59.99 USD

Learn More





Fluke C25 Large Soft Case C25 1437
For use with Fluke Multimeters.
$39.99 USD

Learn More

Fluke C550 Premium Tool Bag C550 1447
Tool Bag with steel reinforced frame.
$99.99 USD

Learn More




Fluke TL27 Heavy Duty Test Lead Set TL27 2000
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs.
$34.99 USD

Learn More


Fluke TL40 Retractable Tip Test Lead Set TL40 2004
Adjustable to desired length from 0 to 76mm.
$44.99 USD

Learn More

Fluke TP1 Slim Reach Test Probe Set TP1 2040
For probing closely spaced or recessed terminals designed to hold securely in blade type electrical wall sockets.
$19.99 USD

Learn More

Fluke TP2 Slim Reach Test Probe Set TP2 2044
For probing closely spaced or recessed terminals compatible with AC72.
$19.99 USD

Learn More

Fluke TL221 Suregrip Silicone Test Lead Extension Kit TL221 1992
Test Lead Extension Kit designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP220 SureGrip Industrial Test Probes TP220 2045
For use with TL222 and TL224 test leads provides reliable contact.
$19.99 USD

Learn More

Fluke TL222 SureGrip Silicone Insulated Test Leads TL222 1993
Test Leads designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP 38 Slim Reach Test Probe Set TP38 2048
For probing closely spaced or recessed terminals.
$19.99 USD

Learn More

Fluke TL224 SureGrip Silicone Insulated Test Leads TL224 1995
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$29.99 USD

Learn More

Fluke TP4 Slim Reach Test Probe Set TP4 2049
Designed to fit securely into IEC electrical wall outlets.
$19.99 USD

Learn More

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27 1377
K-Type, Industrial Surface Temperature Probe.
$296.99 USD

was$329.99


Learn More

Fluke i1010 AC/DC Current Clamp I1010 1821
For use with Digital Multimeters and Calibrators. Features a Current Range of 1A to 600A AC and 1A to 1000A DC.
$382.49 USD

was$424.99


Learn More

Fluke i410 AC/DC Current Clamp I410 1826
1 to 400 Amps DC/1 to 400 Amps AC. For use with digital multimeters, scope meters and power quality analyzers.
$242.99 USD

was$269.99


Learn More

Fluke TL238 Test Lead Set for High Energy Environment TL238 1996
Designed for high energy environments. Kit includes Fluke TP238, TP280, TL224.
$79.99 USD

Learn More

$143.99 USD

was$159.99


Learn More

Fluke TL71 Premum DMM Test Lead Set TL71 2005
Comfort grip probes with silicone insulated, right-angle test leads.
$29.99 USD

Learn More

Fluke TL76 All-in-one Test Lead Set TL76 2008
2mm/4mm 1.5 meter long silicone test leads with right angle shrouded banana plug.
$34.99 USD

Learn More

Fluke TL80A Basic Electronic Test Lead Set TL80A 2009
1 meter long silicone test lead set, alligator clip and probe tip extender in a soft carrying case.
$79.99 USD

Learn More

Fluke TL81A Deluxe Electronic Test Lead Set TL81A 2010
Test Lead Set in quad-fold nylon pouch works with DMMs that accept safety shrouded, standard diameter banana connectors.
$134.99 USD

was$149.99


Learn More

Fluke TL220 Suregrip Industrial Test Lead Set TL220 1990
Includes Fluke AC220, Fluke TP220, and Fluke TL224.
$79.99 USD

Learn More

Fluke TL225 SureGrip Stray Voltage Adapter Test Lead Kit TL225 2646
Voltage Adapter Test Lead Kit makes sure the meter has a low input impedance that eliminates stray voltages and indicates real voltage.
$107.99 USD

was$119.99


Learn More

Fluke TL223 Suregrip Electrical Test Lead Set TL223 1994
includes Fluke AC220, TP1, TL224.
$79.99 USD

Learn More

$719.99 USD

was$799.99


Learn More


$449.99 USD

was$499.99


Learn More

$427.49 USD

was$474.99


Learn More

Fluke 700PRV-1 Pressure Relief Valve Kit 700PRV-1 1326
To be used with Fluke 700HTP-1 Hydraulic Test Pump.
$629.99 USD

was$699.99


Learn More

$656.96 USD

was$729.95


Learn More

Fluke AC220 SureGrip Alligator Clips AC220 1400
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More

Fluke AC280 SureGrip Hook Clips AC280 1401
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$34.99 USD

Learn More

Fluke AC283 SureGrip Pincer Clips AC283 1402
Flexible, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$44.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285 1403
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

Fluke AC89 Heavy Duty Insulation Piercing Test Clip AC89 1412
Insulated, Shrouded Banana Jack. One Red.
$44.99 USD

Learn More

Fluke 771 Milliamp Process Clamp Meter 771 4149
Measures, tests, and troubleshoots 4-20 mA control signals without breaking the mA loop!
$539.99 USD

was$599.99


Learn More


Ask a question about the Fluke 717-30G Pressure Calibrator:

comments powered by Disqus

Review the Fluke 717-30G Pressure Calibrator

" data-description="Pressure Calibrator -12 to 30 PSI (-850 mbar to 2 bar, -85 to 206.84 kPa).">