Fluke 754 Documenting Process Calibrator

Model: 754

HART Communications capability. Measure: 300V AC/DC, 110mA DC. Source: 15V DC, 22mA DC.

$7,299.99 USD

Availability: 4 to 5 Weeks


HART Capabilities

The Fluke 754 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 375 HART communicator.
  • Requires no external box or second tool for everyday HART calibration and maintenance.
  • Offers fast HART communication.
  • Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator.
  • Works with multiple masters, burst mode, and multi-drop configurations.
  • Is easy to update as additional instruments are added and new HART versions are released.
  • Interrogate to determine device type, manufacturer, model, tag.
  • Reconfigure the sensor mapping of dual sensor temperature transmitters.
  • Read HART PV function and smart transmitter digital output while measuring analog mA output.
  • Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings.
  • Re-label smart transmitters by reading and writing to the HART tag field.

Versatile HART Protocol Support

Pressure Instruments
Temperature Instruments
Coriolis Instruments

ABB/Hartmann & Braun
Contrans P1, AS 800 Series

Endress & Hauser
TMT 1221, TMT 1821, TMT 1621

Foxboro Eckardt


I/A Pressure



Micro Motion

Moore Products

Moore Products


3051, 3051S
3244, 3144P





YTA 110, 310 and 320

1Sensor Trim not supported

The 754 supports the commands contained in HART protocol Version 5.7. With 2 MB of memory, the 754 supports a substantial set of HART instructions:

  • Universal commands provide functions that are implemented in all field devices, for example, read manufacturer and device type, read primary variable (PV), or read current output and percent of span.
  • Common practice commands provide functions that are common to many but not all field devices, for example read multiple variables, set damping time, or perform loop test.
  • Device-specific commands provide functions that are unique to a particular field device, for example sensor trim.

HART Operating Modes Supported

  • Point to Point operation , the most commonly used mode, connects the 754 to a single HART device in a 4-20 mA loop.
  • In Multi-Drop mode, several HART instruments can be bussed together. The 754 searches for each, identifies addresses in use, and allows you to select the instrument for calibration and related operations.
  • In Burst Mode, the HART instrument transmits bursts of data without waiting to be interrogated by a master unit. The 754 can take transmitters out of burst mode during test or calibration, then later restore them to burst mode.

Pressure Modules

Covers virtually any pressure application including gauge, differential, dual (compound), absolute, and vacuum.

  • Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.
  • Rugged urethane molded cases protect the modules from rough handling and harsh conditions.
  • Features internal temperature compensation from 0° to 50° C for full accuracy performance.
  • Includes NIST-traceable calibration certificate.
  • Modules can be calibrated locally, helping to control costs.
A family of 29 optional pressure modules provides pressure calibration and measurement capabilities. Twenty-eight modules are available, with basic accuracy specs to 0.05%. Ranges start at 0 - 1 in H20 (0 - .25kPa) and go to 0 - 10,000 psi (0 - 70,000 kPa). Additional information about pressure modules is available on the Pressure Modules Home Page.

Automated Procedures

Allow you to quickly set up powerful, automated calibration procedures for linear transmitters, DP flow transmitters, and one- and two-point limit switches. Simply select the appropriate measure and/or source functions and fill out the procedure template. The 750 Series does the rest. It quickly performs the test, calculates the errors, and displays the final results, highlighting out of tolerance points.

Custom Units

Enable you to map one unit to another, such as mV to °C or °F. Allows you to use the Fluke 750 Series with millivolt output accessories such as the Fluke 80T-IR Temperature Probe, and to document tests using non-supported units such as parts per million or revolutions per minute.

User-entered Values

Enables technicians to record calibration results that were sourced and/or measured by other devices such as panel meters or readout-only devices.

Limit Switch Calibration

Procedures perform fast, automated calibration of one and two-point limit switches for voltage, current, temperature, and pressure.

Differential Pressure Flow Instrument Calibration

Routines use a square root function to directly calibrate DP flow instruments.

Additional Features

Calibrate temperature, pressure, voltage, current, resistance, and frequency. Since it both measures and sources, you can troubleshoot and calibrate all with one rugged tool.

Powerful, yet easy to use
The easy-to-follow menu-driven display guides you through any task. Get up to speed in minutes, not days. Programmable calibration routines enable you to create and run automated as-found/as-left procedures to ensure fast, consistent, calibrations.

Records and documents results
To support your ISO-9000 or regulatory standards the Fluke 754 captures your calibration results, eliminating the need to juggle a pen and pad in the field. The USB interface lets you transfer the results to a PC, thus saving the time of having to manually transcribe them when you return to the shop.

Truly hand-held
Small enough to fit easily into a tool bag and to use in tight spaces. Runs an entire shift on a rechargeable Li-ion battery pack.

Rugged and reliable
Count on Fluke's rugged design to deliver top accuracy and reliability in harsh environments. Overmolded urethane case stands up to rough handling in industrial environments.

Bright white display
Lets you read your results in any kind of light. Backlight has three (3) settings.

Soft keys
Provide one-touch access to enhanced functions such as task lists, automated procedures, scaling, min/max, stepping and ramping, and review memory.

Three operating modes
Measure, Source, or simultaneous Measure/Source, - enable technicians to troubleshoot, calibrate, or maintain instrumentation with just one tool.

Multi-lingual interface
Displays instructions in English, French, German, Spanish, and Italian.

Built-in algebraic calculator
With four functions-plus square root-stores, recalls, and performs calculations required for setting up instruments or evaluating data in the field. Use it to set the source function to a calculated value. There's no need to carry a pencil and paper or a separate calculator.

Programmable measurement delay
Inside automated procedures permits calibrating instruments that respond slowly.

New! Fluke 754

You're going to love what we've done with your calibrator.

The Fluke 754 is everything you needed and wished for in the 744 and more! HART communication capability is combined to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.

The 754 does the work of several tools - sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You'll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package.

For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. Supports popular instrumentation management software.

The 753 and 754, 743 and 744 work with the Fluke DPC/TRACK2™ software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others. It allows you to create procedures, instructions, and action lists to deliver fast, easy documentation.

Fluke 754 Features

Work smarter. Work faster.

The 754 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. The 754 also features a powerful built in HART® interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.

  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results.
  • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
  • Easy to use
  • Three year warranty
  • Bright white dual display. Read both sourced and measured parameters simultaneously.
  • Multi lingual interface
  • Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
  • Delivered with DPC/Track Sample software.
  • Compatible with many Asset Management software packages.

The Fluke 754 Documenting Process Calibrator-HART: Work smarter. Work faster.

HART Communication Protocol

The 753 and 754, 743 and 744 work with the Fluke software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others. It allows you to create procedures, instructions, and action lists to deliver fast, easy documentation

Fluke 754 Specifications

Range and 1 Year Accuracy
DC Voltage Measurement 100.00mV: 0.02% + 0.005mV
3.00000V: 0.02% + 0.00005V
30.0000V: 0.02% + 0.0005V
300.00V: 0.05% + 0.05V
AC Voltage Measurement 3.000V: 0.5% + 0.002V
30.00V: 0.5% + 0.02V
300.0V: 0.5% + 0.2V
DC Current Measurement 30.000mA: 0.01% + 5uA
110.00mA: 0.01% + 20uA
Resistance Measurement 10.000Ω: 0.05% + 50mΩ
100.00Ω: 0.05% + 50mΩ
1.0000kΩ: 0.05% + 0.5Ω
10.000kΩ: 0.1% + 10Ω
Frequency Measurement 1.00Hz to 110.00Hz: 0.05Hz
110.1Hz to 1100.0Hz: 0.5Hz
1.101kHz to 11.000kHz: 0.005kHz
11.01kHz to 50.00kHz: 0.05 kHz
DC Voltage Output 100.000mV:  0.015% + 0.005mV
1.00000V: 0.015% + 0.0005V
15.0000V: 0.015% + 0.0005V
DC Current Output 22.000mA: 0.01% + 0.003mA
Current sint (simulate transmitter): 0.01% + 0.007mA
Resistance Sourcing 10.000Ω: 0.01% + 10mΩ
100.00Ω: 0.01% + 20mΩ
1.0000kΩ: 0.02% + 0.2Ω
10.000kΩ: 0.02% + 3Ω
Frequency Sourcing Sinewave: 0.1Hz to 10.99Hz: 0.01 Hz
Squarewave: 0.01Hz to 10.99Hz: 0.01Hz
Sine and square 11.00Hz to 109.99Hz: 0.1Hz
Sine and square 110.0Hz to 1099.9Hz: 0.1Hz
Sine and square 1.100kHz to 21.999kHz: 0.002kHz
Sine and square 22.000kHz to 50.000kHz: 0.005kHz
Click here for complete specifications on the Fluke 754

What's included with the Fluke 754

  • 754 Process calibrator
  • NIST Traceable Certification
  • BC7240 battery charger
  • Li-on BP7240 battery pack
  • DPCTrack 2 Sample Software
  • 3 x TP220 test probes with three sets of "extended tooth" alligator clips
  • 2 x sets AC280 hook clips
  • C799 Soft Field Case
  • USB communication cable
  • Fluke 754HHC HART communications cable
  • Instruction manual

What's in the box?

Introduction to HART utilities in the Fluke-754 DPC

Testing a RTD input temperature transmitter with the Fluke-754 DPC


Click on a category to view a selection of compatible accessories with the Fluke 754 Documenting Process Calibrator.

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe 80PK-27
K-Type, Industrial Surface Temperature Probe.
$296.99 USD

was $329.99

Learn More

Fluke 80PK-8 Pipe Clamp Temperature Probe 80PK-8
Pipe Clamp Temperature Probe.
$161.99 USD

was $179.99

Learn More

Fluke 80PK-1 Bead Probe 80PK-1
K-Type General Purpose Thermocouple Bead Temperature Probe.
$34.99 USD

Learn More

Fluke 80PK-9 General Purpose Probe 80PK-9
General Purpose, Surface/Air/Gas/HVAC, Temperature Probe.
$69.99 USD

Learn More

Fluke 80PK-22 SureGrip Immersion Temperature Probe 80PK-22
Type K Immersion Temperature Probe designed with a superior gripping surface made from thermoplastic rubber.
$99.99 USD

Learn More

Fluke 80PK-EXT Extension Wire Kit 80PK-EXT
Extension kit for type K thermocouple wires. Includes 3m of thermocouple wire and a pair of male/female mini-connectors.
$59.99 USD

Learn More

Fluke 80PK-24 SureGrip Air Temperature Probe 80PK-24
K-Type, Air and Gas Temperature Probe.
$107.99 USD

was $119.99

Learn More

Fluke 80PK-25 SureGrip Piercing Temperature Probe 80PK-25
K-Type, Piercing Temperature Probe, SureGrip.
$107.99 USD

was $119.99

Learn More

Fluke 80CJ-M type J Male Mini-Connectors 80CJ-M
Package of two male mini-connectors for use with Fluke 80TK or Fluke 50 Series.
$29.99 USD

Learn More

Fluke 80CK-M type K Male Mini-Connectors 80CK-M
Yellow connectors with isothermal screw terminal. Pack of 2.
$29.99 USD

Learn More

Fluke AC285 SureGrip Large Alligator Clip AC285
Large alligator clip for test leads used with Fluke meters.
$24.99 USD

Learn More

Fluke TL940 Mini-Hook Test Lead Set TL940
30V RMS or 60V DC, and 15A.
$24.99 USD

Learn More

Fluke TL950 Mini-Pincer Test Lead Set TL950
30V RMS or 60V DC, and 15A.
$44.99 USD

Learn More

Fluke AC220 SureGrip Alligator Clips AC220
Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.
$44.99 USD

Learn More

Fluke AC280 SureGrip Hook Clips AC280
Rigid, Insulated, Shrouded Banana Jacks. Pair of Black and Red.
$34.99 USD

Learn More

Fluke 700HTP-2 Hydraulic Test Pump 700HTP-2
The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31.
$1,099.95 USD

Learn More

$449.99 USD

was $499.99

Learn More

Fluke 700PRV-1 Pressure Relief Valve Kit 700PRV-1
To be used with Fluke 700HTP-1 Hydraulic Test Pump.
$629.99 USD

was $699.99

Learn More

$539.99 USD

was $599.99

Learn More

$359.99 USD

was $399.99

Learn More

Fluke C700 Hard Carrying Case C700
For use with the Fluke 700 Series.
$224.99 USD

was $249.99

Learn More

Fluke C781 Meter Case C781
Zippered with detachable pouch.
$69.99 USD

Learn More

Fluke 750SW Dpc/Track2 750SW
The 753, 754 and 743,744 work with the Fluke DPC/TRACK2 software to create procedures, instructions, and action lists to deliver fast, easy documentation.
$3,499.99 USD

Learn More

Ask a question about the Fluke 754 Documenting Process Calibrator:

comments powered by Disqus

Review the Fluke Corporation 754

" data-description="HART Communications capability. Measure: 300V AC/DC, 110mA DC. Source: 15V DC, 22mA DC.">